then can u tell me why my new board is not running only cpu fan running and its just restarting after 1 min.but no display or anything and sometime it work ..and i can use it for anything good ,but when again i m shut down it and same problem again. no run after 1min its restart..
What ram are you using can you tell me the specs especially the volts.You might have 1.65v memory modules and you will have to increase the voltage of the ram or it might just be incompatible with your board check the gigabyte website for your board and see what brand and type of memory it supports.
Well your ram is not listed in the memory support list.The only other thing you can try is setting your ram in the bios to 1066 speed see if that works.Here is the link to your motherboard if you are interested to read it. http://www.gigabyte.com/products/product-page.aspx?pid=3743#ov
http://www.gigabyte.com/products/product-page.aspx?pid=3743#sp latest rev motherboard.. (buy it this year?) board?
I already gave him a link to his motherboard.To the op check if you have the latest bios on your board also.
ok i find the reason with the help of gigabyte service people in my area ... its actually my ram prob its corsair new ram and its the main reason, i m send it for rma.............same model other ram will work fine but not mine...
I love these replies. How can he if it wont POST. Herp Derp :3eyes: I know people are trying to help but.. come on. At least pay attention to the guys posts
And if you read it like i did the first time you will know it was one for a 1 min... but with NO display @OP Make sure if you get some different ram, that it is on the QVL for your motherboard
He also said that sometimes it worked.Anyway he found the solution to his problem and that's what matters most we are here to help each other.
