Discussion in 'Videocards - NVIDIA GeForce' started by BetA, Sep 15, 2010.
here are the BIOS with 1.063 max.
Still does not work.
Tnx for trying
hmmm.that is very strange..u can check the bios urself with nobitor and see the value..Im not shure why this is do? maybe u flashed it wrong?
Flashing is not the problem.
I have no idea what else to do :/
When you set voltage to 1.063V NVins and AB shows different value than when you set to 1.213v.
i am clueless, sorry..
only thing that might come into my mind would be this:
or something elese i cant think of yet..
One more thing...
How much did you set the minimum voltage?
Did you set it to 0.963V?
i didnt set the minimum voltage at all..u asked me to up the max voltage restriction..
Hmmm can you set min. to 0.963V and max to 1.063v?
This was exactly what i was looking for since i just got my gtx 465!
Im so tired of manually changing fan from 40% to 30%.. So can u help me too?
Heres my bios:
Edit: i want minimum fan speed 30% please
your fan speed is allready set to 30% minimum..See here:
And going any lower is not recommend at all..
so is there a way for it to stay 30% idle by itself? because the fan never go below 40% - even though its only 37C degrees
Edit: sorry for stupid question, but i wonder why gainward makes it stay on 40% idle speed. it makes soooo much more sound than 30% :3eyes:
That's simple, because not all Towers have good airflow.
And how can you hear the fan if it is running at 40%?
My fans on my Geforce GTX 460 1GB run at 55%, and i cant hear them.
Because at 20%, Current x Voltage may be too low to spin up teh freaking fan.
And it's not just Gainward. It's from Nvidia's referent design
I dont know about your brand, but mine's spinning at 1850 RPM on 40 %... thats NOT idle numbers if u ask me.
While on 30% 1450 RPM..
And i have a nzxt isolated case.
Im not requesting 20% - but 30%. I can already spin it down manually to 30. But i wish it could adjust that automatically in dynamic mode(ExperTool)
If putting the custom fan speed curve Afterburner in Autorun does not do the job
I guess you'll have to edit the BIOS.
My fans of my Geforce GTX 460 1GB are running about 2200 rpm and i
can almost not hear them, so i think you have to have super hearing or
you just have purchased a Geforce GTX 465 with a sh*t fan.
But i think you just are kidding yourself, if you want no sound buy a GFX
card with no fan's or go with water cooling.
Is that one of those myths - Water Cooling is silent ?
In the end it does not matter. His desire is perfectly reasonable.
I also wanted to lower my min. fan speed, but gave up after doing some research.
No i do not find it reasonable, he has purchased a Geforce GTX 465 with 2
fans, and everybody knows that fans make sounds, so if you do not want
sound then buy a GFX Card with NO fans, like the Palit GeForce GTX 560 Ti
Twin light LE
Could you lower the min fan speed to 30% on my inno3d 460gtx 1gb card? Would be awesome
Here's my bios: http://www.megaupload.com/?d=YFDDWXLZ
no problem mate, i have ur bios right here
Min Fan SPeed set to 30% now..Rest untouched..