Fermi, GTX460, GTX470, GTX465, GTX480...Bios Modding..Edit Voltage restrictions-mods

Discussion in 'Videocards - NVIDIA GeForce' started by BetA, Sep 15, 2010.

  1. loneknives

    loneknives Guest

    Messages:
    229
    Likes Received:
    0
    GPU:
    Galaxy gtx 670 GC
    Hi BetA13
    can you set the min fan speed to 20%?

    thanks!!!
     
  2. Wallguy

    Wallguy New Member

    Messages:
    3
    Likes Received:
    0
    GPU:
    MSI Hawk Gtx460 1gb sli
    Thanks for the help BetA13, the flash went fine. It appears 900mhz sli is quite doable with the extra voltage.

    Unfortunately though (and I promise it was not related to overvolting) one of my cards died. It has been flaky since the day I bought it but it only recently got bad enough that I was able to isolate it as the problem. Now I get stuck at the Win 7 welcome screen if I try to boot with the bad card enabled. It sucks extra since it was the better overclocker of the two cards. Even at stock voltages it could muster 2250 or so for the memory.

    I'm buying 2 Hawks as replacements so I may eventually need your bios help again.


    I also wanted to verify for amiga and any interested that my Gigabyte cards had no trouble downclocking to 50mhz at idle in sli, so it definitely isn't normal if yours can't do it.
     
  3. D3VIOUS

    D3VIOUS Member

    Messages:
    12
    Likes Received:
    0
    GPU:
    EVGA GTX560Ti SLI
    Hey Beta
    i need this bios of GTX470SC by EVGA to b
    1-stock voltage for 3d profile to b 1087
    2-min fan speed can b 30%
    3-unlock the Voltage all the way plz till 1.212 or if theres sth higher

    thank in advance :)
    here is the file

    http://www.mediafire.com/?n0nhl2bslogbl9o
     
  4. AmigaWolf

    AmigaWolf Guest

    Messages:
    546
    Likes Received:
    1
    GPU:
    GeForce GTX 1080


    Which Geforce Driver do you use?

    I am using Geforce Win7 x64 260.63 Beta.
     

  5. Mda400

    Mda400 Maha Guru

    Messages:
    1,087
    Likes Received:
    199
    GPU:
    4070Ti 3GHz/24GHz
    For everyone that doesn't want to wait for him to mod your bios, DO IT YOURSELF.

    Here's a link to a page with Nibitor (where you can adjust voltages and clocks yourself, but only fan speed is not changeable (really i dont know why you would want fan speed any lower than the stock. not that loud)), Drivers for nvidia cards, and STOCK BIOS for a bunch of card vendors (incase you need to RMA a card and need the original bios).

    http://www.mvktech.net/component/option,com_remository/Itemid,26/func,select/id,57/
     
  6. AmigaWolf

    AmigaWolf Guest

    Messages:
    546
    Likes Received:
    1
    GPU:
    GeForce GTX 1080
    NiBiTor v5.7 dos not work on the Geforce GTX 450 and 460 Cards, and thats
    why we cannot do it ourself.

    Only the Geforce GTX 470 and 480 owners can use NiBiTor v5.7.
     
  7. BetA

    BetA Ancient Guru

    Messages:
    4,524
    Likes Received:
    477
    GPU:
    G1-GTX980@1400Mhz

    lol are u mad at me or something..
    Stop wasting time here in this thread...If people come to me, let em..that is not ur problem..
    So go and ..... urself...

    im back from wotk now..ill be home in about 50 min. then i will do all the stuff thats need to be done..

    cya´ll then ;)

    greetz Beta
     
  8. BetA

    BetA Ancient Guru

    Messages:
    4,524
    Likes Received:
    477
    GPU:
    G1-GTX980@1400Mhz

    hy mate..

    here try this one..max table Voltage @ 1.000

    greetz Beta
     
  9. BetA

    BetA Ancient Guru

    Messages:
    4,524
    Likes Received:
    477
    GPU:
    G1-GTX980@1400Mhz
    hy there...

    here is ur modded Bios ;)

    greetz Beta
     
  10. BetA

    BetA Ancient Guru

    Messages:
    4,524
    Likes Received:
    477
    GPU:
    G1-GTX980@1400Mhz
    hy my Overclocker^^

    heres the Voltage unlock...

    greetz Beta
     

  11. BetA

    BetA Ancient Guru

    Messages:
    4,524
    Likes Received:
    477
    GPU:
    G1-GTX980@1400Mhz


    hello...

    here you go, min. Fan speed set to 30%...

    greetz Beta
     
  12. BetA

    BetA Ancient Guru

    Messages:
    4,524
    Likes Received:
    477
    GPU:
    G1-GTX980@1400Mhz
    hy there..

    Both Bios set to 20% min. fan speed...

    greetz Beta
     
  13. BetA

    BetA Ancient Guru

    Messages:
    4,524
    Likes Received:
    477
    GPU:
    G1-GTX980@1400Mhz
    hy there..

    here it is...But i cant set fan speeds on the gf100 chip´s..im sorry..
    But i maxed maximal voltage out and set the 3d volt to 1087..

    greetz Beta
     
  14. HachiRoku

    HachiRoku New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    Palit GTX 460 SP 1GB
    I'm trying it right now, and works flawlessly!!!

    Thanks so much!
     
  15. D3VIOUS

    D3VIOUS Member

    Messages:
    12
    Likes Received:
    0
    GPU:
    EVGA GTX560Ti SLI
    thx beta worked with me :)
     

  16. xmms

    xmms New Member

    Messages:
    6
    Likes Received:
    0
    GPU:
    Gigabyte gtx460 oc
    Thanks Beta13 i flashed without any problem. Work fine..
     
  17. vampirismbeast

    vampirismbeast New Member

    Messages:
    5
    Likes Received:
    0
    GPU:
    Palit GTX 470 dual fan
    it works, everything is good.
    Thanks for your help.
     
  18. Wallguy

    Wallguy New Member

    Messages:
    3
    Likes Received:
    0
    GPU:
    MSI Hawk Gtx460 1gb sli
    I used 260.63, but stopped because of an Nvidia control panel bug when running an external display (my tv), but I hit 50 mhz with those drivers too.

    I settled on 258.96 as the best drivers for me at the time and hit 50mhz fine with those too.

    I also tried the Tweakforce version of that driver, and the beta 259.31 drivers. Every driver I've used had no trouble downclocking both of my cards to 50mhz in sli.

    I did notice that if I'm doing much of anything the cards would bump up to the mid level profile periodically, but mostly 50mhz was the norm.


    I almost forgot to say that I'm running Win7 x64 like you.
     
    Last edited: Sep 29, 2010
  19. AmigaWolf

    AmigaWolf Guest

    Messages:
    546
    Likes Received:
    1
    GPU:
    GeForce GTX 1080


    Strange, with one Geforce GTX 460 he will hit 50mhz, both with 2 in SLI he
    will not go lower then 405MHz.
     
  20. Mda400

    Mda400 Maha Guru

    Messages:
    1,087
    Likes Received:
    199
    GPU:
    4070Ti 3GHz/24GHz
    no its just really sad there needs to be an extra thread for people who dont research anything before they ask. This is also why like i said, make orbum2k release that editor. I would use it since its more unified than Nibitor.

    Why so hostile anyways? :chainsaw2:
     

Share This Page