EVGA GeForce GTX TITAN X HydroCopper

Discussion in 'Frontpage news' started by Hilbert Hagedoorn, Mar 17, 2015.

  1. Hilbert Hagedoorn

    Hilbert Hagedoorn Don Vito Corleone Staff Member

    Messages:
    42,863
    Likes Received:
    10,537
    GPU:
    AMD | NVIDIA
    The EVGA GeForce GTX TITAN X combines the technologies and performance of the new NVIDIA Maxwell architecture in the fastest and most advanced graphics card on the planet. ...

    EVGA GeForce GTX TITAN X HydroCopper
     
  2. NiscoRacing

    NiscoRacing Member

    Messages:
    43
    Likes Received:
    1
    GPU:
    EVGA GTX 680 4GB (WC)
    I think my next videocard just got released :D

    (EVGA GTX680 HydroCopper)
     
  3. LesserHellspawn

    LesserHellspawn Master Guru

    Messages:
    672
    Likes Received:
    19
    GPU:
    RTX 3080ti Eagle
    I thought Nvidia don't allow non-reference builds ? So will this be released as an assembly kit where you need to swap the cooler out yourself ?
     
  4. koliko

    koliko Member

    Messages:
    23
    Likes Received:
    0
    GPU:
    EVGA 780ti

  5. fantaskarsef

    fantaskarsef Ancient Guru

    Messages:
    12,674
    Likes Received:
    5,140
    GPU:
    2080Ti @h2o
    According to this link it looks like it's going to come assembled. It's more or less a reference card still, only the cooler is exchanged.
     
  6. Fox2232

    Fox2232 Ancient Guru

    Messages:
    11,809
    Likes Received:
    3,367
    GPU:
    6900XT+AW@240Hz
    nV likely wants to keep reference PCB to prevent AIB cards from reaching crazy overclocks which would increase moral lifespan of cards, which with Titan name is already high.
     
  7. fantaskarsef

    fantaskarsef Ancient Guru

    Messages:
    12,674
    Likes Received:
    5,140
    GPU:
    2080Ti @h2o
    Still they put special voltage controlls on them, like Vet mentioned in the other thread. Might make them last longer (and overclock higher) eventually, even with the reference pcb.
     
  8. Veteran

    Veteran Ancient Guru

    Messages:
    12,103
    Likes Received:
    21
    GPU:
    2xTitan XM@1590Mhz-CH20
    There is no point volt nodding these on air, you will kill the card. The vrms will pop, remember its the electrical current that kills and not the amount of voltage. Running any card with a volt mod on air is something I would never ever do.

    However a card without a voltmod that s running on water is a waste of cooling. The reason why I sent the 980s back was because of no proper voltage controller. Hence they don't clock very high at all even when using something like evbot.
     
  9. TheDeeGee

    TheDeeGee Ancient Guru

    Messages:
    7,566
    Likes Received:
    1,689
    GPU:
    NVIDIA GTX 1070 8GB
    Knowing EVGA this is gonna cost 1000 + 500 for the Waterblock.
     

Share This Page