Download & Discuss Geforce Driver 361.43 WHQL

Discussion in 'Videocards - NVIDIA GeForce Drivers Section' started by alanm, Dec 21, 2015.

  1. alanm

    alanm Ancient Guru

    Messages:
    9,954
    Likes Received:
    2,118
    GPU:
    Asus 2080 Dual OC
  2. maur0

    maur0 Master Guru

    Messages:
    789
    Likes Received:
    42
    GPU:
    point of view gtx 570 1gb
  3. skizzo

    skizzo Active Member

    Messages:
    55
    Likes Received:
    9
    GPU:
    GeForce GTX 1070 8GB
  4. BadDriver

    BadDriver Master Guru

    Messages:
    283
    Likes Received:
    2
    GPU:
    STRIX-GTX1070-8G
    Significant bug fixes:

    · [GM20x] Clock speeds remain above idle at 144 Hz on desktop.
    · Lag in Star Wars Battlefront with SLI enabled after updating to driver 359.06.
    · Momentary loss of signal after scoring first goal in Rocket League
    · Game crashes on certain GeForce GTX 860M notebooks

    Fermi GPU Changes:

    As of Windows 10 November Update, Fermi GPUs now use WDDM 2.0 in single GPU configurations.
    For multi-GPU configurations, WDDM usage is as follows:
    · In non-SLI multi-GPU configurations, Fermi GPUs use WDDM 2.0. This includes configurations where a Fermi GPU is used with Kepler or Maxwell GPUs.
    · In SLI mode, Fermi GPUs still use WDDM 1.3.
     

  5. maur0

    maur0 Master Guru

    Messages:
    789
    Likes Received:
    42
    GPU:
    point of view gtx 570 1gb
    one doubt, and hdmi 2.0 for gtx 400/500 is enable to using 4k 60 hz using RGB32 in modern monitor and tv?
    or conmtinues limited to 4k 30 hz using rgb32 and YCc4:2:0 for 4k 60 hz
     
  6. holystarlight

    holystarlight Master Guru

    Messages:
    792
    Likes Received:
    62
    GPU:
    Nvidia 2080 TI SLI
    · [GM20x] Clock speeds remain above idle at 144 Hz on desktop.

    That's brilliant that they fixed this, this been issue for ages. yay
     
  7. yosef019

    yosef019 Ancient Guru

    Messages:
    2,132
    Likes Received:
    5
    GPU:
    EVGA 1080 ti
    nice! bad that new assaing creed is too short game
     
  8. Zuhl3156

    Zuhl3156 Active Member

    Messages:
    83
    Likes Received:
    0
    GPU:
    MSI GTX-980 Gaming 4G SLI
    Downloading now and installing shortly. I will report back with my results or any problems.
     
  9. Kaill

    Kaill Member Guru

    Messages:
    112
    Likes Received:
    14
    GPU:
    EVGA GTX 1080 FTW
    Fermi

    So that still doesn't mean DX12 support we just got the WDDM 2.0 support correct those aren't one and the same right.
     
  10. CalinTM

    CalinTM Ancient Guru

    Messages:
    1,589
    Likes Received:
    8
    GPU:
    MSi GTX980 GAMING 1531mhz
    branch: 361_40-4
     

  11. Lokius

    Lokius Member

    Messages:
    38
    Likes Received:
    0
    GPU:
    Evga gtx 1080
    My GTX 970 is still going to 899mhz on 1440p at 144hz.
    Maybe it is because i have a dual monitor setup though.
     
  12. Sethos

    Sethos Member Guru

    Messages:
    155
    Likes Received:
    4
    GPU:
    MSI 1080 Ti Sea Hawk X
    144Hz Idle certainly ain't fixed on dual-monitors and / or SLI. It idles at 595 CPU and 3505MHz mem.
     
  13. Stealth83

    Stealth83 Active Member

    Messages:
    84
    Likes Received:
    0
    GPU:
    MSI RTX 2080ti SH-X
    Nor single monitors, not fixed for me either.
     
  14. AvengerUK

    AvengerUK Master Guru

    Messages:
    699
    Likes Received:
    4
    GPU:
    Titan X (Pascal) EK-WB
    Fixes...in a nvidia driver?

    It must be Christmas :D
     
  15. Denial

    Denial Ancient Guru

    Messages:
    13,234
    Likes Received:
    2,721
    GPU:
    EVGA RTX 3080
    I don't think they intend on dropping the frequency for multiple monitors. Fury X was doing that when it launched and people were running into corruption issues. Honestly they do probably set it too high, but it's probably to avoid edge cases where corruption can occur with certain setups.

    It was only fixed for GM20x setups. 980Ti is GM210.
     

  16. xankazo

    xankazo Ancient Guru

    Messages:
    2,839
    Likes Received:
    7
    GPU:
    EVGA 1060 SC (6GB)
    Downloading now... Let's see how it treats this GTX760.
     
  17. Helidoc

    Helidoc Member

    Messages:
    11
    Likes Received:
    0
    GPU:
    GTX 980 Ti SC+ 6GB
    Still getting a dxgmms2.sys BSOD with these on Win 10 Pro TH2 with an error of dxgmms2!VIDMM_CPU_HOST_APERTURE::UnmapRange+3a seems like quite a few folks over on the NVidia forums were reporting the same since TH2 dropped the only fix being to revert back to the 347.88 drivers which I really did not want to do. Was hoping that this new set would fix it although I do not know at this point if it's a NVidia or MS issue with DX. :bang:
     
  18. dr_rus

    dr_rus Ancient Guru

    Messages:
    2,989
    Likes Received:
    337
    GPU:
    RTX 2080 OC
    They are not the same but it makes no sense to support WDDM 2.0 and not support DX12. I'm pretty sure that Fermi's got DX12 FL11_0 support with these drivers. Interesting sidenote on SLI though.

    980Ti is GM200.
     
  19. Zuhl3156

    Zuhl3156 Active Member

    Messages:
    83
    Likes Received:
    0
    GPU:
    MSI GTX-980 Gaming 4G SLI
  20. Denial

    Denial Ancient Guru

    Messages:
    13,234
    Likes Received:
    2,721
    GPU:
    EVGA RTX 3080
    I mean it's probably a combination of both, obviously Microsoft made a change and Nvidia hasn't updated it's driver for that change yet. Microsoft said that the first build of TH2 made a bunch of low level changes to OneCore, pretty obvious that it was going to break stuff.

    Good point, I'm retarded. Sorry
     

Share This Page