Discontinued (check OP link for future drivers) - Clean Version

Discussion in 'Videocards - NVIDIA GeForce Drivers Section' started by cryohellinc, Jun 5, 2018.

  1. EeK

    EeK Member

    Messages:
    44
    Likes Received:
    9
    GPU:
    EVGA GeForce GTX 10
    The new driver (441.12) doesn't appear to have fixed the issue that I had with 441.08.

    This time, I'd already used CRU to make the necessary modifications to my display's EDID (adding a custom resolution of 4K@66Hz and deleting all 4096x2160 resolutions). I also made sure to restart Windows to apply the override, instead of running restart64.exe, as that's what seemed to trigger the odd behavior before.

    Only after clicking on "Enable settings for the selected display model" and hitting "Apply", under the G-Sync tab on NVCP, is that my system restarted automatically and went into an infinite reboot loop again.

    Even though my TV is now "G-Sync Compatible", it still shows up as not validated on NVCP, requiring manual enabling of that setting. It's been like that for the previous two drivers with support for G-Sync: 441.08 and 440.52 (beta). However, the infinite reboot loop issue only happened on drivers 441.08 and 441.12.

    Not sure what's causing it. It may have something to do with VRR and the TV's "Instant Game Response" mode, which activated even before enabling that specific setting and immediately after installing the new driver (G-Sync was enabled by default for full screen mode).

    Any guesses? Everything worked fine in Safe Mode, but a simple reset of the EDID (using reset-all.exe) didn't solve the issue today, and I was forced to reinstall the driver (always via DDU). I haven't used CRU since, as I'm afraid of triggering the infinite reboot loop once more.

    Edit: Of note is that when I installed beta driver 440.52 (the only one with support for G-Sync on my display that didn't cause any issues), it had not been modified in any way.

    As I mentioned, by the time I saw the clean version that @cryohellinc kindly uploaded in response to my request, 441.08 was already available. Is it possible that there's something in these new drivers, required for the newly certified G-Sync panels (such as the 2019 LG OLEDs), that is now being erased during the regular cleaning process? Kinda like how Nvidia incorporated even more telemetry into their drivers recently.

    Cryo, did you notice any differences in the file structures of 440.52, 441.08 and 441.12 and the rest? 440.97 had no support for G-Sync on my set, so that's the last "regular" one.
     
    Last edited: Nov 6, 2019
    cryohellinc likes this.
  2. cryohellinc

    cryohellinc Ancient Guru

    Messages:
    3,364
    Likes Received:
    2,698
    GPU:
    RX 5700 XT/ MAC M1
    I'm afraid I can't be of any help regarding your TV issues, however, I appreciate the feedback and discussion on the topic.

    Regarding file structure, they have moved some of the content from the DCH version into a standard driver. So I assume Nvidia is doing some unification across the board. Other than this, I haven't noticed anything major structure-wise.
     
    EeK likes this.
  3. Orbo

    Orbo New Member

    Messages:
    1
    Likes Received:
    2
    GPU:
    RTX2080 Super
    Just joined to say Thank You very much for doing these drivers for us . This is the first place I visit now once I know a new version has been released.
     
    Blackfyre and cryohellinc like this.
  4. BlackNova92

    BlackNova92 Member Guru

    Messages:
    109
    Likes Received:
    8
    GPU:
    16gb
    is there a clean version of 431.86?
     

  5. cryohellinc

    cryohellinc Ancient Guru

    Messages:
    3,364
    Likes Received:
    2,698
    GPU:
    RX 5700 XT/ MAC M1
    That is a studio driver, hence, no.

    Check the OP, on the bottom is a manual cleaning guide. Alternatively, use NVSlimmer.
     
  6. ShadowDuke

    ShadowDuke Ancient Guru

    Messages:
    4,157
    Likes Received:
    587
    GPU:
    MSI Gaming 970
    Clean 441.20 WHQL - Desktop (Win10/x64)
    Gdrive
     
  7. cryohellinc

    cryohellinc Ancient Guru

    Messages:
    3,364
    Likes Received:
    2,698
    GPU:
    RX 5700 XT/ MAC M1
    @ShadowDuke
    Thanks for a swift update.

    @Everyone else - no time today, busy with work. Expect a clean version tomorrow morning.
     
    Shataan and mapnam charun like this.
  8. blitz72

    blitz72 Master Guru

    Messages:
    674
    Likes Received:
    126
    GPU:
    EVGA RTX2070 Black
    Is that for RTX or just GTX or both? Thanks for the up.
     
    mapnam charun likes this.
  9. ShadowDuke

    ShadowDuke Ancient Guru

    Messages:
    4,157
    Likes Received:
    587
    GPU:
    MSI Gaming 970
    GTX no RTX.
     
    blitz72 and mapnam charun like this.
  10. Eviltoaster

    Eviltoaster Active Member

    Messages:
    55
    Likes Received:
    292
    GPU:
    MSI 1070 Gaming X
    blitz72 and mapnam charun like this.

  11. cryohellinc

    cryohellinc Ancient Guru

    Messages:
    3,364
    Likes Received:
    2,698
    GPU:
    RX 5700 XT/ MAC M1
    First post updated with Clean 441.20 WHQL - Desktop/Notebook Versions

    Previous drivers moved into the Archive.
     
    tom942, blitz72 and mapnam charun like this.
  12. Aragorn

    Aragorn Member

    Messages:
    43
    Likes Received:
    4
    GPU:
    XFX RX480 8GB
    hi

    Does the "Clean RTX 441.20 WHQL - Desktop Versions" include the nvidia control panel ?
     
    mapnam charun likes this.
  13. mapnam charun

    mapnam charun Member

    Messages:
    47
    Likes Received:
    14
    GPU:
    GTX 1650 4gb GDDR6
    Yes sir,nvidia control panel is include on all clean build.
     
    cryohellinc likes this.
  14. Chastity

    Chastity Ancient Guru

    Messages:
    2,696
    Likes Received:
    892
    GPU:
    Nitro 5700 XT
    NVCP is a DLC add-on for "Clean RTX 441.20 WHQL - Desktop Versions", and costs $3.99 USD. Only available on Epic Games and Microsoft Store at this time. Coming to Steam, EA Origin, and GOG soon.
     
    mapnam charun and cryohellinc like this.
  15. cryohellinc

    cryohellinc Ancient Guru

    Messages:
    3,364
    Likes Received:
    2,698
    GPU:
    RX 5700 XT/ MAC M1
    PM me for discount pre-order steam keys.
     
    mapnam charun likes this.

  16. Aragorn

    Aragorn Member

    Messages:
    43
    Likes Received:
    4
    GPU:
    XFX RX480 8GB
    sorry for my bad explanation, but the clean drivers are based on standard or dch version ?
     
  17. SaberJ2X

    SaberJ2X Ancient Guru

    Messages:
    2,531
    Likes Received:
    34
    GPU:
    Zotac 3080 OC
    if I turn on the image sharpening on Windows 1909 it starts to sharpen some apps lol
     
    mapnam charun likes this.
  18. Hughes

    Hughes New Member

    Messages:
    9
    Likes Received:
    0
    GPU:
    ZOTAC GTX 1060 6GB
    Same problem here with the clean version.
    Any tips?
     
  19. cryohellinc

    cryohellinc Ancient Guru

    Messages:
    3,364
    Likes Received:
    2,698
    GPU:
    RX 5700 XT/ MAC M1
    All clean drivers are based on Standard version.

    Because you have turned it on in the Global profile. Turn it on per individual application profile.

    Not so sure about this. Have you followed small guide on the first post regarding Geforce Experience?
    Try that method.
     
  20. SaberJ2X

    SaberJ2X Ancient Guru

    Messages:
    2,531
    Likes Received:
    34
    GPU:
    Zotac 3080 OC
    works fine in regular driver
     

Share This Page