Diamond Monster Voodoo 2 "MegaMonster" Setup

Discussion in 'Videocards - 3dfx' started by scrapser, Mar 19, 2013.

  1. scrapser

    scrapser Master Guru

    Messages:
    575
    Likes Received:
    0
    GPU:
    780 ti Kingpin CLFD 3 GB
    I found this on eBay and it's on the way. Is there anything special I need to set it up? I don't think it will have any drivers since it's used.

    I currently have a single Diamond Monster Voodoo 2 using the driver on the CD that it came with (I'm the original owner). I know there have been some drivers developed for 3DFX over the years but haven't messed with them.

    Any suggestions or help would be appreciated.

    The 3DFX cards are PCI. I have an old Gateway P4 1.8 gHz Socket 478/850 Chipset with 512 megs RAM. The graphics card is a GeForce Ti-4600 128 meg AGP. PSU is 250 watts. I'm running Win98SE on this box.
     
  2. Glidefan

    Glidefan Don Booze Staff Member

    Messages:
    12,333
    Likes Received:
    1
    GPU:
    GTX 1070 | 8600M GS
  3. scrapser

    scrapser Master Guru

    Messages:
    575
    Likes Received:
    0
    GPU:
    780 ti Kingpin CLFD 3 GB
  4. ---TK---

    ---TK--- Ancient Guru

    Messages:
    22,135
    Likes Received:
    0
    GPU:
    2x 980Ti Gaming 1430/7296
    wrong thread.
    [​IMG]
    [​IMG]
     
    Last edited: Jun 9, 2015

  5. Mineria

    Mineria Ancient Guru

    Messages:
    3,781
    Likes Received:
    6
    GPU:
    Asus Strix GTX 1080
    I used the newest driver provided by 3DFx for my Voodoo 2 cards on Windows 98 SE, it corrects some issues and supports the latest Glide API supported by the card.

    I suppose you have 2 monsters with 12MB on each?

    As for SLI, the only thing special that you need is the grey ribbon cable between the cards and only using one short VGA cable in the same way as you do with a single Voodoo2.
     
    Last edited: Jun 22, 2015

Share This Page