Discussion in 'Videocards - AMD Radeon' started by OnnA, Oct 3, 2016.
Silly Vincent looking for Ampere and RDNA2 info in Christ's tomb.
Im waiting for that guy to help him with his Monitor (this 650€ one)....
Vincent Vega, or Jesus?
Is it possible to enable freesync on a monitor without freesync when the monitor is connected to the computer via a Display Port cable?
You can try, maby it's compatibile with Vesa VRR.
My 4K display reports the DCI 4K 4096 × 2160 as a supported resolution. The problem with this is if I try to use something like Nvidia GPU scaling, the driver assumes 4096 is my native resolution (I guess because it's the highest?) and everything then is sent to the display upscaled to 4096 with black borders. Can I use CRU to remove this resolution? Does it modify the EDID on the display or just the EDID information copied to the registry?
I think it's in the registry.
But Yes, You can remove unwanted resolution NP.
Try & Tweak
Anyone tried overclock an LG CX OLED tv? it's gsync and 120hz, hdmi 2.1
So what are you doing there? sorry to ask
FS is at 30-75
Audio for monitor is lowered to censervate bandwidth
Specs little higher than normal 71Hz (FRT at 70FPS for smooth play)
Also it has some additional resolutions for Demos & 4K Gaming w/VSR
(Monitor have 400 peak brightness, i can watch HDR content).
You know the usual Tweaks
Note: 74Hz is possible but with 8Bit...
I think I need some help with mine then
Can someone help me set this up on my AOC e2250swda? I wanna OC my monitor to 75Hz. I had config screenshots somewhere, but can't find them. Whatever I have tried to set it up, I get input not supported.
P.S. DM me if you can help
Give me PDF for Your monitor (Specs).
Rest will be easy
This should be it:
https://aoc-pim.s3.amazonaws.com/Public/AOC/Product Data and Pictures/50ID/E2250SWDAK/Manual/E2250SWDAK_English.pdf
Thanks man. I tried to make it work myself, but I guess I'm stupid for this.
Specs can also be found here: https://www.cnet.com/products/aoc-e2250swda-led-monitor-full-hd-1080p-21-5/
V Rate = 50-76Hz
H Rate = 30-83Hz (also try 30-60Hz)
Max Pixel 330
Make custom resolution (look into my screen) at 74Hz (If it work then try 75Hz)
Make only 1 resolution, if it work then add another if needed.
Add extension block with Freesync at 35-75Hz (36,37 up to 45)
Done - it should work.
Ok, I will try