i'm putting together an AMD X2 4200+ Connect3D X1800XL Perhaps 3 HD when i'm completed 19" Rosewill monitor TIA for input http://www.newegg.com/Product/Product.asp?Item=N82E16817171001 Model Brand COOLER MASTER Model RS-450-ACLY Series Real Power SPEC Type ATX12V Maximum Power 450W Fans 1 PFC Active Main Connector 24-Pin Dual +12V Yes SLI Support No Modular Cabling Support No Hold-up Time 17ms min. Efficiency > 75% Input Voltage 115/230 V Input Frequency Range 50/60Hz Input Current 8A @ 115V, 4A @ 230V Output +3.3V@30A, +5V@35A, +12V1@18A, +12V2@16A, -12V@1.0A, +5VSB@2.5A MTBF > 400,000 Hours Approvals Nemko / TUV / cUL / CE / CNS Features Connectors 1 x Main connector (24 pin) 1 x 12V (P4) 7 x peripheral 2 x SATA 2 x Floppy http://www.newegg.com/Product/Product.asp?Item=N82E16817151023 Model Brand SeaSonic Model S12-430 SPEC Type ATX12V Maximum Power 430W Fans 1 PFC Active Main Connector 24-Pin Dual +12V Yes Efficiency Up to 80% Input Voltage 100 - 240V Input Frequency Range 50/60Hz Output +3.3V@30A, +5V@30A, +12V1@14A, +12V2@15A, -12V@0.8A, +5VSB@2A MTBF >100,000 Hours i also got this Seasonic offer http://www.newegg.com/Product/Product.asp?Item=N82E16817151024 http://shop2.outpost.com/product/4548657 Total Output Power: 500W (Full Load, Nominal Input Voltage) Efficiency: 70% Typical at Full Load and Nominal Input Voltage Input AC Input Voltage: 115V/230V AC Input Frequency: 50-60Hz AC Input Currents: · 8.5A (RMS) for 115VAC input · 5.5A (RMS) for 230VAC input Additional Features * Supports AMD and Intel Motherboards * NVIDIA® SLI™ Ready * Low Acoustic Noise * 120mm Fan * Meets ATX Version 2.2, v1.3, and ATX 12V Version 2.2 Specifications * Short Circuit Protection * In-Rush Current Protection * Thermal Overload Cutoff Protection * MTBF > 100,000 Hours at Full Load, 110VAC and 25°C Ambient Condition * FCC and UL Recognized
S12s are awesome. Onlything on the market that compares to PC-P&Cs. This is another PSU that I can recomend for the price range. http://www.newegg.com/Product/Product.asp?Item=N82E16817256001