1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

CM Stacker 832... :D READ THIS!!!!

Discussion in 'Die-hard Overclocking & Case Modifications' started by d1fferent, Aug 3, 2008.

  1. d1fferent

    d1fferent Maha Guru

    Messages:
    1,425
    Likes Received:
    0
    GPU:
    N/A
    Hello all,

    anyone know of any case modifications to help me tidy my case plz?

    (Pics and link and info all aprreciated)

    As my Mobo currently at 35c Idle.. and 50c full Load

    Also any tips like put dan over northbridge to keep cool is very handy for me thanks,

    Please comment I am very active atm looking for fast quick responses, :D:),

    d1fferent
     
    Last edited: Aug 3, 2008
  2. Cartman372

    Cartman372 Maha Guru

    Messages:
    1,467
    Likes Received:
    0
    GPU:
    680 FTW+ 4GB 1280/7200

    Sorry it took so long. I read this and skipped over it the first time D: . But anyway, I favor using a Dremel for when I need to tidy up wires that cant be tidy'd up any other way.

    Use/Buy/Borrow a Dremel and just watch out for MB screw holes.
     
  3. d1fferent

    d1fferent Maha Guru

    Messages:
    1,425
    Likes Received:
    0
    GPU:
    N/A
    cheers bruva :D

    also on my cpu at 3.3 ghz on my tru 120 extreme w/ sflex fan is idle temps of 35-40 c ok?

    But full load 50-60c

    and mobo 60c!!!

    thanks,

    d1fferent,
     
  4. MoosePower

    MoosePower Master Guru

    Messages:
    885
    Likes Received:
    0
    GPU:
    MSI GTX 970
    The mobo seems a bit warm, but as long as the processor stays below 60c you should be ok. Is there a way for you to attack a fan to the north bridge heatsinc?
     

  5. d1fferent

    d1fferent Maha Guru

    Messages:
    1,425
    Likes Received:
    0
    GPU:
    N/A
    Well I have a 40mm fan but does not fit,

    Do you suggest RMA'ing it but also i noticed when running OCCT the volts on my PSU get up to 14.5v on my 12v rail is this ok or high?

    PSU or MOBO or BOTH?

    What do you recon mate,

    thanks much appricated for quick responses,

    d1fferent
     
  6. d1fferent

    d1fferent Maha Guru

    Messages:
    1,425
    Likes Received:
    0
    GPU:
    N/A
    anyone?
     
  7. d1fferent

    d1fferent Maha Guru

    Messages:
    1,425
    Likes Received:
    0
    GPU:
    N/A
    ............
     
  8. MoosePower

    MoosePower Master Guru

    Messages:
    885
    Likes Received:
    0
    GPU:
    MSI GTX 970
    Don't rma the motherboard if its working... Any way you can zip tie the fan to the heatsinc?
     
  9. d1fferent

    d1fferent Maha Guru

    Messages:
    1,425
    Likes Received:
    0
    GPU:
    N/A
  10. d1fferent

    d1fferent Maha Guru

    Messages:
    1,425
    Likes Received:
    0
    GPU:
    N/A
    anyone know of any info or case mods plz link photos
     

  11. Cartman372

    Cartman372 Maha Guru

    Messages:
    1,467
    Likes Received:
    0
    GPU:
    680 FTW+ 4GB 1280/7200

    You really need to learn to be patient. Making 4 threads and bumping every 15 minutes is not going to help you.
     
  12. daveid

    daveid Ancient Guru

    Messages:
    2,780
    Likes Received:
    3
    GPU:
    8600GTS + 7300GT DDR3 / 7600GS
    seriously, pick one thread and stick to it, the mods will close down at least three (if not all four) of your threads.
    so pick either this one here or
    http://forums.guru3d.com/showthread.php?t=269335
    http://forums.guru3d.com/showthread.php?t=269339
    http://forums.guru3d.com/showthread.php?t=269336
    one of those. and stick to it. don't bump constantly, and keep making new threads, you are asking for trouble with the moderators.
     

Share This Page