ClockTuner for Ryzen (CTR) - and introduction guide and download

First, thanks for uploading the new version.
Should we keep posting results/issues on this thread? Just wondering if there's a public issue tracker or something similar.

 

thanks for the info, but I have a problem.... I put llc in the bios at level 3 but now the program tell me :

***ClockTuner for Ryzen 1.0r by 1usmus***
AMD Ryzen 5 3600 6-Core Processor (870F10)
Micro-Star International Co., Ltd B450 TOMAHAWK MAX (MS-7C02)
BIOS ver. 3.72 SMU ver. 46.62.00
DRAM speed 3200 MHz
09/30/2020 21:58:22
AVX light mode
Cycle time: 30000 ms
Reference frequency: 4050MHz
Reference voltage: 1225 mV
Voltage step: 6 mV
Manual overclocking mode enabled
Sets overclocking parameters...
CCX1 Quality 127 Frequency 4050 MHz Voltage 1225 mV
CCX2 Quality 116 Frequency 4050 MHz Voltage 1225 mV
Step# 1
Diagnostic VID voltage: 1225 mV
Stress test started! 09/30/2020 21:58:36
CPU Vdroop: 0.5 % CPU Temperature: 53.5°
There is a need to reduce LLC!
Stress test stopped! 09/30/2020 21:59:10
Step# 2
Diagnostic VID voltage: 1219 mV
Stress test started! 09/30/2020 21:59:11
CPU Vdroop: 0 % CPU Temperature: 55.1°
There is a need to reduce LLC!
SOC SVI2 1.087
Thread# 13 fall down, usage 61.8%
Stress test stopped! 09/30/2020 21:59:42
Step# 3
Diagnostic VID voltage: 1225 mV
Diagnostic results:
Energy efficient: 3.31
AMD Ryzen 5 3600 6-Core Processor - Bronze sample
Recomended values for Overclocking:
Reference frequency: 4100 MHz
Reference voltage: 1275 mV
Recomended values for Undervoolt:
Reference frequency: 3900 MHz
Reference voltage: 1175 mV

what should I do? putting it on automatic tells me the same thing... hmmmmm

 

So I ran this first V1 version lots of times, and got to a Silver chip, every time. Not changed from 3200/C14 yet. (3800X)

4.375MHz at 1.345V all core OC.

Currently folding to see if stable.

My Asus Mobo had to have LLC (Load Line calibration, CPU) to 'Higher', one under 'Extreme'.
And the CPU Phases to 'Extreme' (All Phases in use' rather than the default, which doesn't seem to use all of them).

I have an Asus TUF B450M-PRO Gaming mobo, with Watercooled VRM's, CPU and GPU, in that order.

 

Ouch Apparently my 3950x is silver sample.
Considering this "Silver" sample 3950x got 169000mbps 7zip & 10356 on CB20 on hwbot Im not sure how you class the 3950x's.

 

Thanks for the new version, which I decided to try out.

Sadly I'm back to the "old" behaviour, where no errors is reported, and the system keeps bumping the clocks, until the computer restarts.

Whatever caused it to work earlier, it was not the things I tried, as I did the same this time, and it did not work.

I'm very curious as to what makes it work once in a while.

 

***ClockTuner for Ryzen 1.0s by 1usmus***
AMD Ryzen 7 3700X 8-Core Processor (870F10)
ASUSTeK COMPUTER INC. TUF GAMING X570-PLUS
BIOS ver. 1407 SMU ver. 46.54.00
DRAM speed 3000 MHz
09/30/2020 21:19:43


AVX Light mode
Cycle time: 240000 ms
Reference frequency: 4075 MHz
CCX delta: 25 MHz
Reference voltage: 1250 mV
Target voltage: 1250 mV


Cinebench 20 started
Cinebench 20 finished with result: 3203
Voltage: 0 V PPT: 0 W Temperature: 0°
Manual overclocking mode enabled

Step# 1
Sets overclocking parameters...
CCX1 Quality 137 Frequency 4075 MHz Voltage 1250 mV OC+
CCX2 Quality 122 Frequency 4075 MHz Voltage 1250 mV OC+
Stress test #1 started! 09/30/2020 21:22:00
FFT: 2048 CPU Vdroop: -Infinity % CPU Temperature: 0°
Stress test stopped! 09/30/2020 21:23:27
Stress test #2 started! 09/30/2020 21:23:28
FFT: 1344 CPU Vdroop: -Infinity % CPU Temperature: 0°
Stress test stopped! 09/30/2020 21:24:54
Stress test #3 started! 09/30/2020 21:24:55
FFT: 4096 CPU Vdroop: -Infinity % CPU Temperature: 0°
Stress test stopped! 09/30/2020 21:26:21​

I suspect this isn't working quite right... Temps next to CCX1 and CC2 register, but C01 C02 etc just show zero.

Just me?

 

Bios Update ?

https://www.asus.com/Motherboards/TUF-GAMING-X570-PLUS/HelpDesk_BIOS/

 

Oh dear god.

I didn't have Ryzen Master installed. I forgot... I'd reinstalled Windows a few weeks back and while the AMD folder in the Start menu was still there... I'd not reinstalled it.

*hides under closest rock*

 

Just for the record: The Beta 2 fixed my program start crash issues. Nice work!

 

Seems my BIOS is way out of date too.. not sure why I never noticed...better rectify that too

 

Thank you! Every time I have updated the reference frequency and voltage per the overclocking recommended values in the diagnostic, the computer crashes and reboots. Using the undervolt recommendations though, it does look like I get improved perf at lower consumption. Very cool!

 

Potentially dumb question - how does one uninstall beta 1? Just delete all of the extracted files in the destination folder?

 

So now that the new version states the LLC message can be ignored, what is our best preference? Do I keep trying different LLC Modes until I don't get any messages about needing to increase or decrease? Or just stick with Mode 3 as per recommendation?

MSI x570 Tomahawk

 

I was hopefull reading this. However I am still crashing at around the same mark as before.

 

just update it and now im getting this

Too high voltage!
Immediate system reboot required!

dont know what to do, restart and redo the diagnostic and start again?

 

Great.
What about already applied profile ?

How can update the beta 1 without losing my already applied profile (if possible) ?

 

Updated to Beta 2, Reference Frequency still >6000MHz after running diagnostic. Using a Ryzen 3 3100 on a Asrock B550M Steel Legend mobo. I assume the mobo is the issue.
*Followed all steps, BIOS correct, confirmed running Beta 2, reread the guide 3 times over to ensure I didn't miss anything.

 

I upgraded to beta 2, and I cant even run diagnosis anymore. The fields are greyed out.
It would at least run in the first beta

***ClockTuner for Ryzen 1.0s by 1usmus***
AMD Ryzen 5 3600X 6-Core Processor (870F10)
Gigabyte Technology Co., Ltd. X570 AORUS ELITE
BIOS ver. F30a SMU ver. 46.64.00
DRAM speed 3600 MHz
10/01/2020 01:48:14


Critical error. Core tags are not defined correctly!
You should read the guide.​

The only thing that seems relevant is all the cores have a value of '100' to the right of the clock speeds. Was getting different numbers there in previous beta. Other values are being populated via Ryzen Master seem OK.