ClockTuner for Ryzen (CTR) - and introduction guide and download

Discussion in 'Processors and motherboards AMD' started by Hilbert Hagedoorn, Sep 29, 2020.

  1. vlado85rs

    vlado85rs New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    3060 Ti
    Hi, I have a problem with ClockTuner for Ryzen 2.0 RC4/5 start.

    Aorus x570 Pro F33c BIOS
    Ryzen 5900X
    Memory (Kingston 2x16 GB 3200 CL6) tested on XMP, and 3600 OC

    Windows 10 64 bit, version 20H2, build 19042.804
    New Ryzen Chipset drivers
    New Ryzen Master
    .NET Framework 4.8
    BIOS SVM, C-state, CPPC enabled
    LLC on Auto and Turbo tested
    Voltage, Frequency on Auto

    CTR Config Cleaner nothing to clean.
    Manually deleted folders from user/appdata and made new start.
    I started with administrator permissions.

    Simply when you start the program, it only briefly appears in the Task Manager and disappears immediately.

    Everything worked OK for me at 4.5 Ghz with 1.2V, but lately my computer is restarting when I export photos from RAW format from Lightroom, so I set 4.4 Ghz with 1.2V. With PBO enabled and manual settings, the processor in games reaches a temperature of 78-86C which is too much (Arctic Liquid Freezer 280). With manual overclocking it does not exceed 66C. However on manual overclocking with 1.225V it reaches 90C very easily in Cinebench20.
     
  2. boyoboyo

    boyoboyo New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    GTX 1060
    Hi,

    I have a strange graphical bug with CTR, the application is displayed with borders truncated on the bottom and on the right, any ideas ? I've found nothing related with this behavior :-/

    ctr_bug.png
     
  3. boyoboyo

    boyoboyo New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    GTX 1060
    Don't pay attention to my last message, I resolved it by modifying Windows display parameters.
     
  4. silkencorgi

    silkencorgi New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    rtx 3070
    why CTR doesn't see all my cores and showes only 2 of them? r5 3600
     

    Attached Files:


  5. Alexnero

    Alexnero New Member

    Messages:
    7
    Likes Received:
    0
    GPU:
    Nvidia 1660 6GB
    This question has been asked before. You have a Ryzen 3600. In your picture i see 2 CCX en 6 cores. So, it's all normal to me.
     
  6. Babel-17

    Babel-17 Member Guru

    Messages:
    149
    Likes Received:
    14
    GPU:
    Gigabyte RTX 3080
    I've tried fixing the same issue, to no avail. Please tell me what setting you changed.
     
  7. schmak

    schmak New Member

    Messages:
    3
    Likes Received:
    0
    Question for you all. Love the app, works great, getting a kick ass OC out of my 3600 rig (4.45 @ 1.25v) but I was curious, is there a way to unload the profile once set without rebooting? I'd like to load it up for when I am gaming/working but for light browsing and video watching unload it. I'm sure I just missed a button/toggle somewhere.
     
  8. MerolaC

    MerolaC Ancient Guru

    Messages:
    3,587
    Likes Received:
    422
    GPU:
    MSI 5600XT G. MX
    You can just set it to Hybrid OC. It will switch between profiles, so when YouTubing it will underclock/volt.

    He probably modified the Scaling settings.

    Right click desktop> Display Settings> Scale and layout
     
  9. Zeuskk

    Zeuskk New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    GeForce GTX 1660Ti
    Guys it is possible that my RAM OC could decrease OC capabilities of my Ryzen 3600? Before that with stock RAM (Crucial Ballistix 3000MHz CL15 2x8GB Micron E-die) I was able to get Tuned profile P1 with ~3800 points in Cinebench R20. I didn't try to generate P2 profiles because I dicided first stable max OC my RAM. I reached 3766MHz CL16 1.1V SOC, 1.4V DRAM, full stable (few 10h stress tests) so I back to CTR and went throught Diagnostic first and next Tune. After Diagnostic I reached only ~3620 points and after Tune worse result ~3550 points but with a bit better CPU Voltage and PPT. It is normal or sth wrong is with my RAM OC? Too tight timings? I didnt try to generete P2 profile. Ryzen 3600 Bronze sample.
     
  10. BlackNova92

    BlackNova92 Member Guru

    Messages:
    135
    Likes Received:
    8
    GPU:
    16gb
    profiles don't save on restart with rc5, cleaned my files already and tried it more than 5 times but no shot.
     

  11. Empewrawr

    Empewrawr New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    5700XT
    Why is CTR boosting my bad CCX above the recommended frequency more than my best CCX? I can't apply the recommended profiles because my system crashes right away.
    LLC: Turbo
    PBO: Auto
    FB_IMG_1619083082125.jpg
     

    Attached Files:

  12. Mufflore

    Mufflore Ancient Guru

    Messages:
    12,828
    Likes Received:
    1,351
    GPU:
    Aorus 3090 Xtreme
    For sure because the Memory controller is on the CPU.
    I had this happen with my 6700K, it would clock to 4.7GHz with memory (also clocked) running at 3600MHz.
    But if I changed my memory speed to 3733MHz I could only clock the CPU to 4.6GHz.

    It was later fixed by a better water cooler on the CPU, then the CPU clocked to 4.7GHz and ram to 3866MHz.
    ymmv.
     
  13. Dimitris39

    Dimitris39 New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    RX5700 8GB
    Hi guys,

    Ive been using clocktuner since its release and now am using RC4 version with hybrid oc profile. I know the guide says to leave core ratio auto but i thought that if you set the default cpu speed(i.e 3600 for my cpu-R5 3600) the vcore will continue to stay low since the speed stays the same.However, sometimes after cold boot and with CTR hybrid oc loaded the voltage stays at default (1.048v-1.096 for 3600 speed) but after 1-2 minutes it starts to fluctuate from default to highest value even though the cpu speed remains the same. This is fixable after 1-2 restarts.Could this be due to cold boot? Should i just leave core ratio to auto?

    All bios settings are as per the guide except for core ratio which is not set to auto but to 36.00.
    Mobo is ASUS TUF X570 Plus(non wifi)
     
    Last edited: Apr 22, 2021
  14. Michaël Puttaert

    Michaël Puttaert New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    5700 XT / 8 Go
    Hello,

    When i want to use CTR, i have an "Unhandled exception has occured in your application"
    And below i put the details:

    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.

    ************** Exception Text **************
    System.AggregateException: One or more errors occurred. ---> System.IndexOutOfRangeException: L'index se trouve en dehors des limites du tableau.
    at A.c7ef8ec682dd21d60b7ea8e49e2ff83f2.c4b2b5269da59e74b132925ea851be902(UInt32 c91b8e8c6b920a0470c9303cddd849b85, UInt32 cc0650b24cbbfa641f8eeefecf7d85306)
    at A.c7ef8ec682dd21d60b7ea8e49e2ff83f2.cbb741d43f92a89df7d8f79ad4eccda58()
    at A.c7ef8ec682dd21d60b7ea8e49e2ff83f2.c4792d7f2a99c37b3f283378e247d194b()
    at System.Threading.Tasks.Task.Execute()
    --- End of inner exception stack trace ---
    at System.Threading.Tasks.Task.ThrowIfExceptional(Boolean includeTaskCanceledExceptions)
    at System.Threading.Tasks.Task.Wait(Int32 millisecondsTimeout, CancellationToken cancellationToken)
    at A.c7ef8ec682dd21d60b7ea8e49e2ff83f2.c3fc703dfbda1b86430b15596c6c05928(Object c277b280cb8fe3785a6c267498280c752, EventArgs c8da54f451ad34b6795b09c79d576523f)
    at System.Windows.Forms.Control.OnClick(EventArgs e)
    at System.Windows.Forms.Control.OnClick(EventArgs e)
    at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
    at System.Windows.Forms.Control.WndProc(Message& m)
    at System.Windows.Forms.Label.WndProc(Message& m)
    at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    ---> (Inner Exception #0) System.IndexOutOfRangeException: L'index se trouve en dehors des limites du tableau.
    at A.c7ef8ec682dd21d60b7ea8e49e2ff83f2.c4b2b5269da59e74b132925ea851be902(UInt32 c91b8e8c6b920a0470c9303cddd849b85, UInt32 cc0650b24cbbfa641f8eeefecf7d85306)
    at A.c7ef8ec682dd21d60b7ea8e49e2ff83f2.cbb741d43f92a89df7d8f79ad4eccda58()
    at A.c7ef8ec682dd21d60b7ea8e49e2ff83f2.c4792d7f2a99c37b3f283378e247d194b()
    at System.Threading.Tasks.Task.Execute()<---



    ************** Loaded Assemblies **************
    mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
    ----------------------------------------
    Nemesis UIv2
    Assembly Version: 2.1.0.8
    Win32 Version: 2.1.0.8
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/CTR%202.0.exe
    ----------------------------------------
    System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4300.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    Nemesis UIv2&&
    Assembly Version: 1.0.0.0
    Win32 Version: 2.1.0.8
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/CTR%202.0.exe
    ----------------------------------------
    System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    ----------------------------------------
    System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4084.0 built by: NET48REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    ----------------------------------------
    Bunifu_UI_v1.5.3
    Assembly Version: 1.5.3.0
    Win32 Version: 1.5.3.0
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/Bunifu_UI_v1.5.3.DLL
    ----------------------------------------
    System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4190.0 built by: NET48REL1LAST_B
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    ----------------------------------------
    System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4341.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
    ----------------------------------------
    System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4084.0 built by: NET48REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
    ----------------------------------------
    System.Windows.Forms.DataVisualization
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4200.0
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.DataVisualization/v4.0_4.0.0.0__31bf3856ad364e35/System.Windows.Forms.DataVisualization.dll
    ----------------------------------------
    Bunifu.UI.WinForms.ToggleSwitch
    Assembly Version: 1.11.5.2
    Win32 Version: 1.5.5.2
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/Bunifu.UI.WinForms.ToggleSwitch.DLL
    ----------------------------------------
    Bunifu.UI.WinForms.BunifuTextbox
    Assembly Version: 1.11.5.2
    Win32 Version: 1.5.5.2
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/Bunifu.UI.WinForms.BunifuTextbox.DLL
    ----------------------------------------
    Bunifu.UI.WinForms.BunifuPages
    Assembly Version: 1.11.5.2
    Win32 Version: 1.11.5.2
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/Bunifu.UI.WinForms.BunifuPages.DLL
    ----------------------------------------
    Bunifu.UI.WinForms.BunifuFormDock
    Assembly Version: 1.11.5.2
    Win32 Version: 1.6.0.0
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/Bunifu.UI.WinForms.BunifuFormDock.DLL
    ----------------------------------------
    Bunifu.UI.WinForms.BunifuDropdown
    Assembly Version: 1.11.5.2
    Win32 Version: 1.5.7.1
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/Bunifu.UI.WinForms.BunifuDropdown.DLL
    ----------------------------------------
    Bunifu.UI.WinForms.BunifuToolTip
    Assembly Version: 1.11.5.2
    Win32 Version: 1.9.0.0
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/Bunifu.UI.WinForms.BunifuToolTip.DLL
    ----------------------------------------
    Embeded
    Assembly Version: 0.0.0.0
    Win32 Version: 1.6.0.0
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/Bunifu.UI.WinForms.BunifuFormDock.dll
    ----------------------------------------
    Bunifu.Core
    Assembly Version: 1.11.5.2
    Win32 Version: 1.5.5.2
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/Bunifu.Core.DLL
    ----------------------------------------
    System.Runtime.Serialization
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4250.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Serialization/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll
    ----------------------------------------
    System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4270.0 built by: NET48REL1LAST_C
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
    ----------------------------------------
    System.Xml.Linq
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4084.0 built by: NET48REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml.Linq/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.Linq.dll
    ----------------------------------------
    System.Management
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4084.0 built by: NET48REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
    ----------------------------------------
    Embeded
    Assembly Version: 0.0.0.0
    Win32 Version: 1.5.3.0
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/Bunifu_UI_v1.5.3.dll
    ----------------------------------------
    Embeded
    Assembly Version: 0.0.0.0
    Win32 Version: 1.9.0.0
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/Bunifu.UI.WinForms.BunifuToolTip.dll
    ----------------------------------------
    mscorlib.resources
    Assembly Version: 4.0.0.0
    Win32 Version: 4.8.4084.0 built by: NET48REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/mscorlib.resources/v4.0_4.0.0.0_fr_b77a5c561934e089/mscorlib.resources.dll
    ----------------------------------------
    Microsoft.Win32.TaskScheduler
    Assembly Version: 2.9.0.0
    Win32 Version: 2.9.0.0
    CodeBase: file:///E:/Downloads/clocktuner-ryzen-2-0-beta-4/Microsoft.Win32.TaskScheduler.DLL
    ----------------------------------------

    ************** JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.

    For example:

    <configuration>
    <system.windows.forms jitDebugging="true" />
    </configuration>

    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.



    Anyone have an idea ?
     
  15. Haraheta

    Haraheta New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    GTX 1080
    Hello, I'm having some problems with the new version CTR 2.1. Could I have some help?

    System.AggregateException: One or more errors occurred. ---> System.NullReferenceException: Object reference not set to an instance of an object.
    at A.c7ef8ec682dd21d60b7ea8e49e2ff83f2.c5c2452607c2665392a3543b056d8caa4()
    at A.c7ef8ec682dd21d60b7ea8e49e2ff83f2.c851a92f7e153dde284accde57e5e21c4()
    at System.Threading.Tasks.Task.Execute()
    --- End of inner exception stack trace ---
    at System.Threading.Tasks.Task.ThrowIfExceptional(Boolean includeTaskCanceledExceptions)
    at System.Threading.Tasks.Task.Wait(Int32 millisecondsTimeout, CancellationToken cancellationToken)
    at A.c7ef8ec682dd21d60b7ea8e49e2ff83f2..ctor()
    ---> (Inner Exception #0) System.NullReferenceException: Object reference not set to an instance of an object.
    at A.c7ef8ec682dd21d60b7ea8e49e2ff83f2.c5c2452607c2665392a3543b056d8caa4()
    at A.c7ef8ec682dd21d60b7ea8e49e2ff83f2.c851a92f7e153dde284accde57e5e21c4()
    at System.Threading.Tasks.Task.Execute()<---
     

  16. chaosophy

    chaosophy Member

    Messages:
    34
    Likes Received:
    10
    GPU:
    AMD RX Vega 64
    Just tried the new 'CTR 2.1 RC5' version and same issue as all other versions, BSOD/reboot on tuning.
    Followed the guide, PC 100% stable on all other tests, just for what ever reason it doesn't get on with CTR. :(
    It just seems that CTR always wants to boost my third worse CCX as the highest frequency.

    With the new version at least it now lists the FIT scores, as well as CPPC tags, for each core.
    Looks like mine don't match in order and I guess CTR is using the FIT score, so thinks those are the better cores?
    Where as CPPC tags seem more in line with visible boost in real world usage?

    I guess FIT scores are maybe meant to be a better way to test core order?
    Certainly CPPC seems odd, as mine can change in value based on BIOS settings, though they do at least seem to stay in the same order.

    So here...

    Code:
    CORES ORDER (from the best to the worst)
    ###    CPPC    FIT
    1    С02    С09
    2    С01    С07
    3    С03    С06
    4    С04    C10
    5    С05    С04
    6    С06    C12
    7    С08    С03
    8    С09    С02
    9    С07    C11
    10    C11    С08
    11    C12    С01
    12    C10    С05
    
    ... it shows Core 9 as having the best 'FIT' but Core 9 is only 8th by CPPC.
    Core 9 is CCX3 and that is the one that is always started with the highest clock in tuning.

    Code:
    Step# 1
    13:34:34: WHEA-counter: 1
    13:34:34: CCX1 (156): 4300 MHz, 1250 mV  OC=
    13:34:34: CCX2 (145): 4325 MHz, 1250 mV  OC=
    13:34:34: CCX3 (134): 4450 MHz, 1250 mV  OC=
    13:34:34: CCX4 (122): 4325 MHz, 1250 mV  OC=
    13:34:35: Stress test #1 started...
    13:34:39: CPU Vdroop: 25.3 % temperature: 32.9°
    13:34:39: CCX1 overclocking failure detected!
    13:34:39: Thread# 0 fall down!
    
    Step# 2
    
    4450 MHz seems to be a it optimistic for CCX3 based on what I see when I monitor my cores during normal usage.
    Also Vdroop reported as 25.3% there which seems v.odd, as is the low reported temp?

    CTR boost tester shows...

    Code:
    CTR BOOST TESTER RESULTS (test version)
    CORE / FREQUENCY / VID / POWER / TEMP
    C01    F 4496    V 1.474    W 12.73    T 54.76
    C02    F 4515    V 1.471    W 13.28    T 54.4
    C03    F 4473    V 1.481    W 13.61    T 58.34
    C04    F 4530    V 1.488    W 13.74    T 55.68
    C05    F 4447    V 1.481    W 13.24    T 56.65
    C06    F 4437    V 1.473    W 13.9    T 59.17
    C07    F 4296    V 1.478    W 11.94    T 55.16
    C08    F 4366    V 1.488    W 12.09    T 55.16
    C09    F 4317    V 1.473    W 12.42    T 56.99
    C10    F 4298    V 1.476    W 11.74    T 54.78
    C11    F 4354    V 1.479    W 12.4    T 55.4
    C12    F 4317    V 1.478    W 12.24    T 56.48
    
    Which is more inline (though not exact) with what I see if I keep HWiNFO open over a days normal usage as to the behaviour of my core boosts.


    Diag result...

    Code:
    DIAGNOSTIC RESULTS
    AMD Ryzen 9 3900X 12-Core Processor
    CPU VID: 1093
    CPU TEL: 1073
    Max temperature: 58°
    Energy efficient: 3.77
    Your CPU is GOLDEN SAMPLE
    Recomended CCX delta: 175
    Theoretical maximum CCX delta: 200
    Recomended values for overclocking (P1 profile):
    Reference voltage: 1250 mV
    Reference frequency: 4300 MHz
    Recomended values for overclocking (P2 profile):
    Reference voltage: 1350 mV
    Reference frequency: 4450 MHz
    Recomended values for undervolting:
    Reference voltage: 1150 mV
    Reference frequency: 4100 MHz
    
    I may be getting this all wrong but to my eye CTR seems to be trying to boost my third worst CCX to the highest, then my second and fourth worst CCXs the same and my best CCX to the lowest?

    CCX3 just can't handle that and so I get the BSODs any time I run it.

    I could look at manually changing the numbers it starts the tuning with but to my mind that would still mean my best/better CCXs would still end up being clocked too low and my highest speed would be limited by CCX3 ?
     
  17. angelrex

    angelrex New Member

    Messages:
    9
    Likes Received:
    0
    GPU:
    Leadtek 6600GT AGP @ 560/1100
    Ok, so looks like there is a bug with 2.1 RC5 that's not loading the profiles correctly?
     
  18. leo80

    leo80 New Member

    Messages:
    2
    Likes Received:
    0
    I have a problem with CTR 2.1 RC5 and FanControl. When I set CTR to automatically load profiles, that works correctly, but I lose automatic control of fans. It seems that FanControl does not refresh temperature readings and thus it does not control fans. If I disable HybridOC and close CTR, my fan controls are working again.

    This is FanControl:
    https://github.com/Rem0o/FanControl.Releases
     
  19. Poyta

    Poyta New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    Geforce 970 SC
    Same error here. I didn't have any problem with the 2.0.

    Ps: I would like to thank the Clocktuner's team for your time to make a wonderful work.



     
  20. xNako

    xNako New Member

    Messages:
    3
    Likes Received:
    0
    GPU:
    RTX 2060
    Profiles not loading correctly in CTR 2.1, but CTR notify with sucessful loading. I have to disable and enable the profiles for getting the correct values.

    Ryzen 5 3600.
     

Share This Page