ClockTuner 2.1 Can Bin Certain Ryzen Cores to 5.0 GHz

Discussion in 'Frontpage news' started by Hilbert Hagedoorn, Feb 16, 2021.

  1. Hilbert Hagedoorn

    Hilbert Hagedoorn Don Vito Corleone Staff Member

    Messages:
    41,872
    Likes Received:
    9,930
    GPU:
    AMD | NVIDIA
  2. schilperoordbas

    schilperoordbas Member Guru

    Messages:
    120
    Likes Received:
    49
    GPU:
    Gigabyte RTX 3080
    Interesting. I have the 5950x. I'll keep this in mind when it gets to the public.
     
  3. Goiur

    Goiur Maha Guru

    Messages:
    1,099
    Likes Received:
    379
    GPU:
    ASUS TUF RTX 3080
    Ez 5Ghz. (bios auto oc with 100 to the core limit)

    upload_2021-2-16_16-1-43.png
     
    Undying likes this.
  4. Undying

    Undying Ancient Guru

    Messages:
    16,466
    Likes Received:
    5,409
    GPU:
    Aorus RX580 XTR 8GB
    Ez. You can do all that through bios without some buggy software doing it for you. Never liked these clocktuners.
     
    NightWind and barbacot like this.

  5. kapu

    kapu Ancient Guru

    Messages:
    4,794
    Likes Received:
    443
    GPU:
    Radeon 6800
    2.0 Didn't work for me . I use PBO + Curve otpimizer. For now i have only 4850 Single core becasue BIOS is locked to +200Mhz PBO , i hope gigabyte will unlock this in future update , becasue in F12 bios i could set +500 PBO ....
     
    Undying likes this.
  6. D1stRU3T0R

    D1stRU3T0R Master Guru

    Messages:
    456
    Likes Received:
    138
    GPU:
    8 GB
    I had +500PBO too, but that doesn't mean that you will use more than 200 even if you set 500. You can't be even sure that you're using all the 200 that you have right now
     
  7. asturur

    asturur Maha Guru

    Messages:
    1,141
    Likes Received:
    359
    GPU:
    Geforce Gtx 1080TI
    Not that there were many clock tuners around before this one.
    What other software similar to this you are talking about?
     
  8. Undying

    Undying Ancient Guru

    Messages:
    16,466
    Likes Received:
    5,409
    GPU:
    Aorus RX580 XTR 8GB
    I was talking about previous ryzen clocktuners and ryzen calculator. Nothing ever worked for me or made sense.
     
  9. kapu

    kapu Ancient Guru

    Messages:
    4,794
    Likes Received:
    443
    GPU:
    Radeon 6800
    I Can be sure , it is +200 right now , flat 4850 on two best cores. And i could do around 5000 on this chip but i can't becasue Gigabyte is lazy as F.... . Of course you won't use +500. I just mentioned options that are not simpli avaliable anymore.
     
  10. waltc3

    waltc3 Maha Guru

    Messages:
    1,326
    Likes Received:
    448
    GPU:
    AMD 50th Ann 5700XT
    I had to use a beginning reference voltage of 1350mV to actually have CTR 2.0 function ideally--even though the diagnostic worked all the way down to 1150mV, at 1250mV--the tuner default starting voltage--the Tuner would crash immediately. I found that 1300mV starting allowed the Tuner to function as well, but it would not clock the CTX cores as high as using 1350mV for the starting tuner voltage, which seems to be the sweet spot for my 3900X. It's still 150mV shy of the 1500mV seen at stock clocks and voltages--presumably for single-threaded boost, which is turned off under CTR's manual overclocking default operation. For anything that uses more than a single, solitary core, my 1350mV CTR clocks are much faster than stock--of course.

    https://valid.x86.fr/zvzjtl
     

  11. Clouseau

    Clouseau Ancient Guru

    Messages:
    2,734
    Likes Received:
    428
    GPU:
    ZOTAC AMP RTX 3070
    What is the difference between CTR and bios based PBO + Curve Optimizer? Already am hitting boost clocks of 5025. The part I do not like about the curve optimizer is that it raises the voltages beyond 1.500 (-25 was my limit but did not like the resulting VID voltages so settled for -20). Hopefully this is what he has addressed with CTR, otherwise what is the point...automated versus manual. Manually setting eight cores hardly took any time. Again, CTR must be meant for 12 cores and above.
     
  12. Goiur

    Goiur Maha Guru

    Messages:
    1,099
    Likes Received:
    379
    GPU:
    ASUS TUF RTX 3080
    With PBO dissabled and curve my highest is 1.481 on 3 bad cores, 1.475 for the rest.
     
  13. Clouseau

    Clouseau Ancient Guru

    Messages:
    2,734
    Likes Received:
    428
    GPU:
    ZOTAC AMP RTX 3070
    Thanks, will give it a go with PBO disabled.
     
  14. bobnewels

    bobnewels Master Guru

    Messages:
    291
    Likes Received:
    169
    GPU:
    RTX 3080
    I remember my 5800X ,got it up to 5200Mhz screen all cores 5125Mhz to make you jelly
    [​IMG]
     
  15. squalles

    squalles Master Guru

    Messages:
    858
    Likes Received:
    49
    GPU:
    Galax GTX 1080 EXOC
    looks normal to me, i´m using one 5900x with curve optimizer in -15 all cores, boost to 125mhz and ppt 142, tdc 95, edc 140 and 2 cores running at 5.075mhz and 1 core at 5.050mhz, anothers running at 4.975mhz or 4.950mhz
     

Share This Page