1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

change resolution on secondary (TV-Out) display in CLONE mode

Discussion in 'Videocards - NVIDIA GeForce' started by seno, Oct 1, 2008.

  1. seno

    seno New Member

    Messages:
    9
    Likes Received:
    0
    GPU:
    MSI NX 7600GT T2D256EZ
    Hi, I have problem with change of screen resolution on my secondary display (TV-Out) in CLONE-mode...

    - all right in situation when display resolutions are :
    primary display = 1024x768
    second display = 1024x768

    - my problem arrives if resolution on primary display is 1280x1024, then on secondary display is resolution 1024x768 maximum and I can't choose higher resolution (in CLONE-mode) and I see only cut-out of primary display on second display

    - I need CLONE-mode and same screen resolution at the both displays = 1280x1024 :bang:

    ........some registry patch for nvidia drivers ? or whatever with help for me ?

    THX



    driver ver.178.13
    MSI NX 7600GT 256MB
    WIN XP SP3
    S-Video
     
    Last edited: Oct 1, 2008
  2. daveid

    daveid Ancient Guru

    Messages:
    2,780
    Likes Received:
    3
    GPU:
    8600GTS + 7300GT DDR3 / 7600GS
    why clone mode? if your tv doesn't support a res higher then 1024x768 then that is your limit period. clone mode is exactly that, both outputs have to match, same res, end of discussion.
    however, you could use dual-view (not span mode) and set them to whatever you would like.
     
  3. seno

    seno New Member

    Messages:
    9
    Likes Received:
    0
    GPU:
    MSI NX 7600GT T2D256EZ
    I need CLONE-mode for video projecting
    It's better
    I shall managing a small LCD display than a big projecting screen

    and my TV have not any resolutions because it's analog TV - PAL support (no HDTV) => 720x576 screen resolution only



    ///// EDIT:

    PROBLEM is partially SOLVED in driver version 175.19 (english) (not in newest driver ver.178.13) - there is possible in cloned mode to change primary + secondary displays to 1280x1024 (with one more settings in control panel - need enable hidden resolutions for prim. & sec. display)
     
    Last edited: Oct 2, 2008
  4. daveid

    daveid Ancient Guru

    Messages:
    2,780
    Likes Received:
    3
    GPU:
    8600GTS + 7300GT DDR3 / 7600GS
    Ultramon
    sorry I didn't think to mention it yesterday, but that's all you need.
     

Share This Page