ATT beta version with HD 4xxx support.

Discussion in 'ATI Tray Tools Public Beta Section' started by Ray Adams, Aug 14, 2008.

Thread Status:
Not open for further replies.
  1. Ray Adams

    Ray Adams Guest

    Messages:
    4,914
    Likes Received:
    0
    GPU:
    ATI HD6950
    Not yet.

    Guyz. Can you check again 3 additional temperatures between ATT and GPUZ? But now please change clocks from 2d to 3d and vice versa.
     
  2. totya

    totya Guest

    Messages:
    117
    Likes Received:
    0
    GPU:
    Asus EAH4850 512MB
    Hi!

    [​IMG]
     
  3. Sinker_UK

    Sinker_UK Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    PowerColor PCS+ HD4850 1G
    Hello,

    I have a problem running Oblivion with the latest beta version (v1.5.9.1294) of ATT. It gives an 'AppCrash' straight away (doesn't even bring up the launcher window). Simply closing ATT allows Oblivion to run. The latest non-beta version works fine. I can post a screen shot of the app crash window if needed. It's a fresh install of 32bit Vista with Catalyst 8.8. Anyone any ideas?

    I've also got a couple of screen shots, below, showing temperatures comparisons, at idle and load (looping FurMark), between GPU-Z and ATT. The only differences are slight but I think that's due to the two programs updating at offset intervals. Hope this helps.

    Cheers.


    Pete.

    At idle:
    [​IMG]

    At load:
    [​IMG]
     
  4. Ray Adams

    Ray Adams Guest

    Messages:
    4,914
    Likes Received:
    0
    GPU:
    ATI HD6950
    Ahh. You mean between text and value! :) Ok.
     

  5. Ray Adams

    Ray Adams Guest

    Messages:
    4,914
    Likes Received:
    0
    GPU:
    ATI HD6950
    2 Sinker_UK - I have Oblivion and can check it. Do you have any kind of custrom Direct3D9 dll's for Oblivion?
    54C at load!? WOW!
     
    Last edited: Sep 17, 2008
  6. Sinker_UK

    Sinker_UK Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    PowerColor PCS+ HD4850 1G
    Hi Ray.

    Not that I'm aware of. I've only just got Vista (for my sins), the graphics card and the motherboard. Oblivion and ATT were the first things I installed to see how it compared with my old X800XT PE. I'm sure Oblivion was without any mods when I first received the AppCrash.

    There is a file called 'atimgpud.dll' in the oblivion folder. Not sure if it's meant to be there or not?

    Thank you.
     
  7. Sinker_UK

    Sinker_UK Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    PowerColor PCS+ HD4850 1G
    Last edited: Sep 17, 2008
  8. Ray Adams

    Ray Adams Guest

    Messages:
    4,914
    Likes Received:
    0
    GPU:
    ATI HD6950
    Good cooling! :)
    2 Sinker_UK I will check today Oblivion
     
  9. Tigertank

    Tigertank Member

    Messages:
    34
    Likes Received:
    0
    GPU:
    XFX 5870
    Hi Ray, what is the option "Force Vsync(Vista workaround)"? Thanks.
     
  10. Ray Adams

    Ray Adams Guest

    Messages:
    4,914
    Likes Received:
    0
    GPU:
    ATI HD6950
    Exactly what you reading :)
     

  11. Ray Adams

    Ray Adams Guest

    Messages:
    4,914
    Likes Received:
    0
    GPU:
    ATI HD6950
  12. Strifey

    Strifey Member

    Messages:
    42
    Likes Received:
    0
    GPU:
    VisionTek HD 4870
    Hey Ray, I'm loving ATT so far, but I was wondering(and I'm not sure how hard this would be) if instead of having to exit, right-click, then open a new part of ATT, if you could make tabs at the top to move through them easily? I think it would make it much easier to maneuver through.
     
  13. Ray Adams

    Ray Adams Guest

    Messages:
    4,914
    Likes Received:
    0
    GPU:
    ATI HD6950
    General idea was "Tray tools" with menu. It is very hard too make something different at this time.
     
  14. krakjen

    krakjen Guest

    Messages:
    68
    Likes Received:
    0
    GPU:
    Radeon R9 290 Tri-X
    Catalyst 8.9 available (with OpenGL 3.0 support).
     
  15. Strifey

    Strifey Member

    Messages:
    42
    Likes Received:
    0
    GPU:
    VisionTek HD 4870
    Ah, ok. Still love ATT over CCC, just wondered about this.
     

  16. mhanor

    mhanor Member

    Messages:
    15
    Likes Received:
    0
    Hello. I'm trying ati tray tools 1.5.9.1298 and I get an access violation (at adr 0055112A in atitray.exe, read of address 0x0, if it matters) when trying to access the OnScreen Display Settings window. After the error, the OnScreen Display Settings window appears, but it looks incomplete.

    Also, an old typo... in the General Options window, the help text (click ?) for Disable low level color correction option ("dissable").

    LE: oops... forgot the details... WinXP Pro SP3, Catalyst 8.9 DD only
     
    Last edited: Sep 18, 2008
  17. Sinker_UK

    Sinker_UK Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    PowerColor PCS+ HD4850 1G
    Ray, I have sent you on a wild goose chase. My system is showing errors whilst running Prime95 torture test (Blend) and instabilities in CoH. Lowering the CPU multiplier seems to help Prime95 and also enables me to run Oblivion with the Beta ATT.

    I believe my problems stem from re-using the old thermal paste on the CPU when I changed motherboards. Time to go to the shops!

    My apologies for suggesting it was ATT.

    I'll install the latest Beta (and Cat 8.9) and get you those temperatures you are after.

    Regards and thanks.

    Pete

    PS.: Mmm, having just read the 8.9 release notes it looks as though some of my problems with CoH are driver related!
     
  18. Ray Adams

    Ray Adams Guest

    Messages:
    4,914
    Likes Received:
    0
    GPU:
    ATI HD6950
    Fill your system configuration
     
  19. mhanor

    mhanor Member

    Messages:
    15
    Likes Received:
    0
    E4300, Abit IP35-E, RAM 2GB, Sapphire HD3850 PCI-E 256MB, PSU Corsair VX450, WinXP Pro SP3 (32bit), Catalyst 8.9 DD only
    I don't have issues with my PC and the previous version worked fine (I don't remeber what version, it was available on betanews.com for some time, until they updated it on their website a few weeks ago, I think)

    http://img257.imageshack.us/my.php?image=38720223zs8.jpg
     
    Last edited: Sep 18, 2008
  20. Ray Adams

    Ray Adams Guest

    Messages:
    4,914
    Likes Received:
    0
    GPU:
    ATI HD6950
    try to uninstall ATT (with deleting all resgitry settings) and install it again.
     
Thread Status:
Not open for further replies.

Share This Page