ATT beta version (UNICODE support)

Discussion in 'ATI Tray Tools Public Beta Section' started by Ray Adams, Oct 2, 2008.

Thread Status:
Not open for further replies.
  1. Ray Adams

    Ray Adams Ancient Guru

    Messages:
    4,942
    Likes Received:
    0
    GPU:
    ATI HD6950
    New beta build. (found some time to do it :) )

    http://cid-a50350ea7a969f0c.skydrive.live.com/self.aspx/Public/attsetup.exe?ccr=148


    [+] New game profiles option. "Disable CrossFire". This option can help you to disable CF temporarily for selected game without disabling CF at hardware level.
    Your second board will not be used in this mode. After game end , CrossFire mode will be restored.
    [+] new ini file option opt_use_soft_clk_read. Set it to 1 to enabled Software clocks reading method. Can help when your board not yet fully supported.

    __________
    Users with HD 4770. Please check this build and do not forget to set Software clocks reading method to 1 !
     
  2. Buchtič

    Buchtič Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    HD3850 512MB AGP
    I'm using SMARTGART for set AGP to 4x. When I tray set Fast writes, AGP write or APG read on Off, after restart this fuction still On. It's possible fix it?
    MSI 875P Neo and HD3850 512MB AGP.
     
  3. Cheerpipe

    Cheerpipe Active Member

    Messages:
    94
    Likes Received:
    0
    GPU:
    2X HD48702 1GB CF

    "Disable CrossFire" work well. Thaks.
     
  4. Ray Adams

    Ray Adams Ancient Guru

    Messages:
    4,942
    Likes Received:
    0
    GPU:
    ATI HD6950
    Why you set them off? Did you try to do same in CCC? (If CCC has such options)
     

  5. Buchtič

    Buchtič Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    HD3850 512MB AGP
    Because AGP4x and fastwrites off are needed for non problem usage 3850 AGP. Yes, it's amazing, but it's real.
    Tomorrow I try install CCC, but I think, that CCC don't have these options.
     
  6. Ray Adams

    Ray Adams Ancient Guru

    Messages:
    4,942
    Likes Received:
    0
    GPU:
    ATI HD6950
    It should be there! For work of AGP board you need smartgard to be installed. ATT has options to change AGP settings, but it uses SMATGARD API same way as CCC
     
  7. NAJMI ADNAN

    NAJMI ADNAN Ancient Guru

    Messages:
    2,176
    Likes Received:
    0
    GPU:
    Sapphire R9 290X TriX 4GB
    The software clock read works on Mobility HD 4570 but I still can't overclock it unfortunately
     
  8. Partizan

    Partizan Member

    Messages:
    16
    Likes Received:
    0
    GPU:
    HD7950
    Ray Adams you are the man :)

    It works fine under Windows 7 x64 :)) Woohoo
     
    Last edited: Jul 29, 2009
  9. Ray Adams

    Ray Adams Ancient Guru

    Messages:
    4,942
    Likes Received:
    0
    GPU:
    ATI HD6950
    Not all mobility chips are supported. Can you please give me SysInfo report from ATT's Hardware menu?
     
  10. NAJMI ADNAN

    NAJMI ADNAN Ancient Guru

    Messages:
    2,176
    Likes Received:
    0
    GPU:
    Sapphire R9 290X TriX 4GB
    Here it is:

    ATT Version 1.6.9.1391
    Display adapter ATI display adapter (0x9553)
    ______________________________
    Core Name
    SubVendor ASUS (1043)
    SubDevice 1B32
    BUS 1
    Device 0
    Function 0
    Base Address 0 D0000008
    Base Address 1 0000D001
    Base Address 2 FBDF0000
    Base Address 3 00000000

    Bus Type Supported PCI Express 2.x
    PCI-E Link Width 8
    Max PCI-E Link Width 16
    SMARTGART Installed No

    Driver Version 09.7
    Release Version 8.632-090702a-084683C-ATI
    QuadBuffer Stereo Support No
    Catalyst Registry Path
    System\CurrentControlSet\Control\Video\{97FC88E3-E16E-44F2-AF49-57CB35AE8B40}\0000

    ______________________________
    Clock Information
    BIOS VPU 680.00
    Current VPU 220.00
    BIOS MEM 500.00
    Current MEM 250.00

    ______________________________
    Overdrive
    Adapter 0
    Supported Yes
    Type PowerPlay
    Level 0 : GPU/MEM/VDDC 220.00/250.00/0.900
    Level 1 : GPU/MEM/VDDC 300.00/500.00/0.900
    Level 2 : GPU/MEM/VDDC 680.00/500.00/1.200

    ______________________________
    Radeon PCI configuration space
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00 02 10 53 95 07 05 10 00 00 00 00 03 10 00 00 00
    10 08 00 00 D0 01 D0 00 00 00 00 DF FB 00 00 00 00
    20 00 00 00 00 00 00 00 00 00 00 00 00 43 10 32 1B
    30 00 00 00 00 50 00 00 00 00 00 00 00 00 01 00 00
    40 00 00 00 00 00 00 00 00 00 00 00 00 43 10 32 1B
    50 01 58 03 06 00 00 00 00 10 A0 12 00 A0 8F 2C 01
    60 10 09 00 00 01 0D 00 00 42 00 81 10 00 00 00 00
    70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    80 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
    90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    A0 05 00 81 00 0C 30 E0 FE 00 00 00 00 B0 49 00 00
    B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    Hardware Information ASIC (Software) Method
    Family 82
    Emulated Revision 42
    Gfx Engine ID 6
    VRam Bit Width 64
    Installed memory 512

    OverDrive 5 Limits Adapter 0
    Core clocks Min 110.00 - Max 680.00
    Memory clocks Min 125.00 - Max 500.00
    VDDC Min 0.900v - Max 1.200v
    ______________________________
    FAN
    1 00000000
    2 00000000
    3 00000000
    4 00000000
    5 00000000
    6 00000000
    7 00000000
    8 00000000

    Video BIOS Information Adapter0
    Version 011.022.000.000
    Part Number BK-ATI VER011.022.000.000.032680
    Date 2009/04/08 23:21
    Vram Type DDR2
    ______________________________
    Multi VPU Caps
    ______________________________
    No additional information
    ______________________________
    Multi VPU State
    ulActiveAdapters 1
    ulAvailableAdapters 0
    ulCurrentAdapter 0
    ulDongleCapabilities 0
    ulDongleConnection 0
    ulDongleDisplayIndex 0
    ulPrimaryIndex 0
    ulMVPUMaxFBSize 0
    ulMVPUMaxPipes 0
    ulMVPUMaxVisFBSize 0
    ulMVPUState 0
    State Bits
     

  11. Ray Adams

    Ray Adams Ancient Guru

    Messages:
    4,942
    Likes Received:
    0
    GPU:
    ATI HD6950
    Should work. How did you test overclocking?
     
  12. NAJMI ADNAN

    NAJMI ADNAN Ancient Guru

    Messages:
    2,176
    Likes Received:
    0
    GPU:
    Sapphire R9 290X TriX 4GB
    On Hardware > Overclocking setting, I need to run the 3D viewer for it to run on 3D speeds, but when I change the clock it revert back to stock, even at 2D speeds still the same, it doesn't respond to any button (voltage, Vcore memory etc), is it something to do with the BIOS that prevents the clock from raising up?
     
  13. Buchtič

    Buchtič Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    HD3850 512MB AGP
    I don't have smartgard in CCC, viz. screen.
    [​IMG]
     
  14. Ray Adams

    Ray Adams Ancient Guru

    Messages:
    4,942
    Likes Received:
    0
    GPU:
    ATI HD6950
    Ok. This is mobility chip so we have a big change that it doesn't supported by ATT :)

    Can you check ATT's SysInfo report? It should say if you have SMATGART service installed or not.
     
  15. chuuey

    chuuey Master Guru

    Messages:
    270
    Likes Received:
    0
    GPU:
    MSI 660Ti Power Edition
    hey Ray, great app :) by the way maybe you could find some time to work on overscan? I seriously refuse to install CCC on my machine ;) and every time i hook up my pc to my plasma i have thos annoying black bars around, is there a chance you will add a working option for overscan? Best of luck :)
     

  16. Ray Adams

    Ray Adams Ancient Guru

    Messages:
    4,942
    Likes Received:
    0
    GPU:
    ATI HD6950
    Sorry but I will not continue to support TV Out and Monitor options. It is very hard for me to do without hardware and information.
     
  17. NAJMI ADNAN

    NAJMI ADNAN Ancient Guru

    Messages:
    2,176
    Likes Received:
    0
    GPU:
    Sapphire R9 290X TriX 4GB
    I guess that's the same answer I get for Mobility too, I really hoped I can overclock this card one day....
     
  18. sideeffect

    sideeffect Master Guru

    Messages:
    319
    Likes Received:
    34
    GPU:
    Vega 56
    I am unable to get OnScreen display working in Windows 7 x64. Is this a general problem or is it something to do with my setup?

    I do have Multiple displays at the moment.
     
  19. Ray Adams

    Ray Adams Ancient Guru

    Messages:
    4,942
    Likes Received:
    0
    GPU:
    ATI HD6950
    There are no problems at all. I have Win7 64. Where did you test it? Just remeber that ATT doesn't support 64 bit games.
     
  20. sideeffect

    sideeffect Master Guru

    Messages:
    319
    Likes Received:
    34
    GPU:
    Vega 56
    Thanks for reply I got it working I just had to restart it :)

    Does ATT support the onboard HD3300 or multiple ATI GPU's. At the moment I am using a 4850 as my main card and the onboard HD3300 to drive a secondary display. I can't see the clocks or information of the HD3300 when the 4850 is the main display. Overclocking has no option to change display card.

    When I change to the HD3300 as the main display using ultramon it shows clocks as 1593:253 in the taskbar. System information identifies

    Clock Information
    BIOS VPU 625.00
    Current VPU 1593.00
    BIOS MEM 993.00
    Current MEM 252.00

    BIOS is the 4850 clocks current is the wrong reading of the HD3300.

    Scrolling down a bit to the overdrive limits shows

    OverDrive 5 Limits Adapter 0
    Core clocks Min 765.00 - Max 850.00
    Memory clocks Min 480.00 - Max 533.00
    VDDC Min 0.000v - Max 0.000v

    My IGP is clocked at 850Mhz core and 533 Memory so the Max reading is correct from overdrive 5. I can't switch between adapters in overdrive it only reads the primary selected adapter.
     
Thread Status:
Not open for further replies.

Share This Page