Discussion in 'Videocards - AMD Radeon Catalyst Drivers Section' started by AmiloMan, Jun 3, 2013.
You can get them here :
lol Guys.. a kind request, if you tried the drivers and they working for you please post the results and comments below. Don't be shy
Anyone wanting to use Adobe's flash with hardware acceleration should definitely try these drivers. I used to have driver crashes with the WHQL 10.2 drivers from AMD, but with these drivers, flash works fine
Windows 8 Pro x64
I can't see this package works on a Win7 x64. The display driver failed to install.
As far as I can seem there are no folders for Win7 at the /Packages/Drivers/Display.
The 12.11 Modded Legacy Driver now currently supports the following Graphic Cards. Starting from HotFix 10 P6 V11.6.
Current Legacy/Supported Graphic Cards
Is This driver Really working for ATI radeon Xpress 1150 graphics for Window 8
i would like to try the modded driver i have a mobility x1400 but dont see it in the legacy card list
The 12.11 Modded Legacy Driver has support for both Desktop and Mobility Previous Legacy Graphic Card. If the driver does install and work correctly for your Graphic Card then you should be prevented with a list of numerous options in Catalyst Control Center.
The list provided above is an old version. I need to update it. Anyways your Graphic Card should be supported as mobility support was recently added.
Use the FLEM Ver 2.0 tool, you will have a wider choice in the drivers YOU want to install and how you want them to be.
Read about it here: http://forums.guru3d.com/showthread.php?t=379516&page=7
A guide to help you out in your modding : http://digitalflem.mydiscussion.net/guide
Its not that hard modding drivers for yourself these days thanks to the tool
Hi, i need these for an XP 32bit machine.
I can't mod drivers because my system has an Nvidia card, and always comes up "invalid package"
the PCI id is PCI\VEN_1002&DEV_5A61&SUBSYS_819A1043&REV_00
Sorry its for ATI/AMD cards only.
my graphics series is ATI radeon Xpress 1150 ..
I installed ATI catalyst control which given in modded for window 8 in this thread ..I installed all component like Ati catalyst control centre and Display driver
It working to fine to window 8 but i cant see Game Video and 3d setting in ATI catalyst centre
Here is IMage of my ATI catalyst centre and Plz help me to get how get all setting in ATI catalyst centre
IF Image is nt working then download from here http://uppit.com/mtxo0n46izih/ATI_IMAge.PNG
Which version of drivers did you mod? You should be getting more options in CCC than what you have right now.
Un-install CCC only and Mod another driver version but only using option 4 to MOD the install package.
Re-install the Catalyst Control Center only.
This may do the trick.
The driver would not work with my Xpress 200M since it's device ID is 5955.
It may be the only variation that does not share system memory but rather has 128mb of dedicated video RAM. There is also an option in the BIOS to use an additional 128mb of system RAM for a total of 256mb available. It seems to run better with only the dedicated memory enabled though.
I -know- it's for ATI AMD cards. But i dont have a PC to RUN this program on with an ATI card in it, i can't mod any drivers because the program thinks i want to mod the Nvidia card. The only one is the XP machine that has the Xpress 200/x300 which digital flem does not run on.
Which is why i asked if you or someone could make a driver for XP for me.
I see you are in quite a predicament What is your DEV-ID and the your XP platform?
Guys as usual after releasing FLEM 2.0 I need some feedback on the mods you guys created. Please post your results of your mods, I know for some guys it did not succeed but the guys who succeeded post your GPU and OS 32/64bit and the driver modded.
Yeah yeah I know its a-lot of typing, be short.
Thanks, just trying to keep the legacy community happy
Very sorry for the belated reply, much appriciated.
The XP machine is SP3 32bit Home and the Dev id is
Here you go mate give these a try.https://www.dropbox.com/s/n4uzdda901dvfig/13-4_xp32_dd_ccc-200Series_whql.7z
Uninstall the current driver and install from setup as usual.
Remember to disable driver signature enforcement.
Cheers Amilo. Will get them installed today or tommorow and will let you know how it goes. TY!