ATI Graphic card overclocking.....All info you need.

wauht about Zalman ZM17CU Copper Video Card Cooling Kit ? is it good for DDRs?

 

It dosent cool RAM chips.
Its just a fanless GPU cooler. Not ggod for card like 9700 pro.
maybe old radeons not thisone.

 

ok.. and what about my previous questions?!?

 

I also would like to build something like viper john's ddr coolers.. any sudùggestions?What do I need?

 

http://imageevent.com/marginjohn/viperjohn

 

can I also put something between the DDR top surface and the HSF bottom surface to "shim" the heatsink and raise it up 2-3mm over the DDR? Because placing it directly on the DDr whitout any kind of shim it would hit other components on the GPU..

Will I loose dissipating performace??

 

i have a r9700 non pro,it says it's ati(made in china??!!)
how can i know which it is(for bios flashing)
and on memory chips it says nothing just some numbers!!!!??

 

well all ATI cards are made in china. They are made in sapphire factory in CHINA.
You can use BBA, sapphire,hercules,gigabyte bios on that card and any one will work

 

but how to know memory,cus i saw that bioses are divided like........r9700hynix, r9700samsung ,r9700infineon???!!!

 

it dosent make lots of difference.
I personally find 9700samsung bios to be best.

what are the writtings/ numbers on your memory chips? post it here.

 

in first row:
hy5du283222
in next row:
f-36 232a
in last row:
kor 7142421c
(space included)
i presume it's hynix but.....

 

IT's Hynix 3,6ns ddr memory.

 

http://www.hynix.com/datasheet/pdf/dram/HY5DU283222F(Rev.1.2).pdf

this is PDF document for your RAM chips, read it if interested.
You can flash your card with samsung memory bios. I did the same with mine and it worked for me.

 

yo funkymonkey, could you please give me a working email address of yours? I haven't been able to get in touch with your bro ! please, this is urgent

 

yo funkymonkey, could you please give me a working email address of yours? I haven't been able to get in touch with your bro ! please, this is urgent !

 

Hi FunkyMonkey, question: with my card should I use 9700np BIOS (for Hynix 3.6ns) or 9700Pro BIOS??

 

use non-pro BIOS!!!!!only if your DDR can handle 310mhz than use pro bios(taj bios ti automatski dize clockove na one od pro!!!,moja nemoze radi na 310mhz pa pretpostavljam ni tvoja;nemoj ni slucajno flesat to na PRO!!!)

 

Hey disco, long time no see, I'm very suspicious about overclocking that card(since your died), I'm fine with it like this for now.(Daj mi reci kaj si moro ici u Zagreb po karticu ili su ti je poslali postom, usput fora ti je avatar)




________________

 

OT:avatar je iz Doom-a 3 hvala(meni je avatar bas ''krvav''

 

I am running a 9500 (alas only on 4 pipelines) at 610/305. This gets 9300 in 3D Mark 2001 SE, which is quite reasonable. I just have a question about it though - is it supposed to have a 256 bit bus becuase it is running one for some reason