ATI Catalyst 12.11 Beta 11 Modded driver For Legacy GPU

Discussion in 'Videocards - AMD Radeon Drivers Section' started by dellon132, Dec 27, 2012.

?

ATI Catalyst 12.11 B11 HotFix 11.01 Thoughts

  1. AMD HD 5000 and 6000 Users (GOOD)

    9.7%
  2. AMD Legacy GPU Users (HD 2000-4000) (GOOD)

    41.7%
  3. AMD Previous Legacy Mobility Users (Old GPU's) (GOOD)

    8.3%
  4. AMD Switchable Graphic Users (GOOD)

    6.3%
  5. AMD HD 5000-6000 Mobility Users (GOOD)

    8.3%
  6. AMD Legacy Mobility Users (HD 2000-4000) (GOOD)

    16.0%
  7. AMD HD 5000 and 6000 Users (BAD)

    0.7%
  8. AMD Legacy GPU Users (HD 2000-4000) (BAD)

    6.9%
  9. AMD Previous Legacy Mobility Users (Old GPU's) (BAD)

    4.2%
  10. AMD Switchable Graphic Users (BAD)

    6.3%
  11. AMD HD 5000-6000 Mobility Users (BAD)

    1.4%
  12. AMD Legacy Mobility Users (HD 2000-4000) (BAD)

    6.3%
Multiple votes are allowed.
  1. Menpower

    Menpower Active Member

    Messages:
    61
    Likes Received:
    0
    GPU:
    Sapphire R9 290 TRI-X OC
    Actually, just the opposite; When you watch flash content and then play games, games absolutely contain artifacts then %70 BSOD occur (KERNEL_SECURITY_CHECK_FAILURE)
     
  2. rizlo

    rizlo Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    amd 4890
    i tried with dde and without in win 7.installing experimental and normal build gave the error not digi sign for amkmdag.sys.when using drive cleaner for experimental build gave this error:coinst.dll is either not designed to run in windows or it contains an error.for the driver i uploaded i used this tool(dseo13b.exe) while i was in 8.1,to sign all the cat files in packages\drivers.by doing this it also added in the C8150272.inf the 2 lines that i mentioned to you that were missing and restarted.tried to install but i came up with the error: that it can't find the files that are referred in the inf file(if i remember correctly) and didn't installed the driver but it installed the catalyst control(visible in the tray).then i copied 3 files from 11.3 and put it in 7.4(difxapi.dll and the other 2 files that were referring in the inf file and added after i signed the cat file) but still nothing.so i replaced all the dl,sy etc files in B134676 from 11.3 version and also replaced the setup.exe from 11.3.i clearly have no clue what i did and made it to work.i hope you can
     
  3. Menpower

    Menpower Active Member

    Messages:
    61
    Likes Received:
    0
    GPU:
    Sapphire R9 290 TRI-X OC
  4. sht

    sht New Member

    Messages:
    4
    Likes Received:
    0
    GPU:
    Mobility Radeon HD 4650
    Driver installation failed

    Mobility HD 4650, Win 8.1 x64 here.
    Tried normal Installation including package and Driver cleaning first, did not work, then tried These two methods.

    After HD 2000-4000 Signature Worrkaround Experimental Build Installation, Windows says I Need a signed Driver.

    Then after ATI Catalyst 12.11 B11 HotFix 10 P6 V11.10.6.7.7.4All Supported OS Installation, the Report.xml says Display and HDMI Audio Driver: not succesfull, Error message: Driver Installation failed.

    Device Manager says the digital signature for the Driver of this device could not be verified. [...] (Code 52).

    What am I doing wrong?
    Is this the "signature bug"?
     

  5. dellon132

    dellon132 Ancient Guru

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Note:
    Users who have followed all steps, and still encounter the signature bug.
    don't be alarmed as the build is not expected to work. Instead it attempts
    to provide a workaround for users experiencing the signature bug. Therefore
    the build is provided as an Experimental Build and not a Official BETA Release
    in which the previous build and notes are removed.

    HD 2000-4000 Experimental Build v0.2
    For Users experiencing the Signature Bug

    Installation Guide
    -Download and Extract
    -Run both aSimple Cleanup Utility
    and aSimple Driver Cleanup.
    -Install the Driver Through AMD Setup Express Installation
    -Install the Driver Through AMD Setup Custom Installaton
    by selecting the Signature Workaround and the Display Driver.
    -Installation Complete.

    Download Link:
    HD 2000-4000 Signature Worrkaround Experimental Build v0.2
     
    Last edited: Nov 24, 2013
  6. sht

    sht New Member

    Messages:
    4
    Likes Received:
    0
    GPU:
    Mobility Radeon HD 4650
    Wow, that was fast. Just installed it, only via custom Installation though, because I was faster than your edit lol.
    with both cleaners.


    Device Manager says
    ATI Mobility Radeon HD 4650 (Microsoft Corporation - WDDM v1.1)
    Driver:
    Advanced Micro Devices, Inc.
    20.06.2012
    8.97.10.6
    Signature: Microsoft Windows Hardware Compatibility

    CCC opens without Errors. Powerplay is broken (see screenshot).
    [​IMG]

    Installation Report.xml:
    Signature Workaround: successfull
    Display Driver & HDMI Audio Driver: unsuccessfull
    Error Messages: Driver Installation failed.



    And as a Bonus, Catalyst --> Information --> Software:
    Code:
    Treiber-Paketversion	8.97-120404a-136823E-ATI
    Catalyst-Version	12.1
    Anbieter	Advanced Micro Devices, Inc.
    2D-Treiberversion	8.01.01.1248
    2D-Treiberpfad	/REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4d36e968-e325-11ce-bfc1-08002be10318}/0000
    Direct3D-Version	7.14.10.0911
    OpenGL-Version	6.14.10.11672
    Catalyst Control Center-Version	2012.1116.1515.27190
     
  7. sht

    sht New Member

    Messages:
    4
    Likes Received:
    0
    GPU:
    Mobility Radeon HD 4650
    Official legacy beta works

    You know what?
    I just installed the official 13.4 beta legacy. It refuses to install the Display Driver, so just deinstall it from device Manager while checking the "delete Driver" box. Then scan for changed Hardware and Point to the extracted Installation Folder.

    Now I have
    Code:
    Driver version	8.97.100-130424a-156445E-ATI
    Catalyst-Version	13.4
    Vendor	Advanced Micro Devices, Inc.
    2D Driver version	8.01.01.1248
    2D Driver path	/REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4d36e968-e325-11ce-bfc1-08002be10318}/0000
    Direct3D-Version	7.14.10.0911
    OpenGL-Version	6.14.10.11672
    Catalyst Pro Control Center-Version	2013.0424.1225.20315
    Is there any reason to use your modded Driver when I can actually use the official one?
     
  8. dellon132

    dellon132 Ancient Guru

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    This isn't the driver listed in my package......Check Device manager to see if Windows installed the WDDM 1.1 Driver. If it did you should have multiple drivers installed.

    Well that's up to you, so far my driver have not installed on your system.
    It seems the signature is not being added to the trusted root store so installation ends in failure. Therefore I would like to ask you to perform the following steps

    Go to c8150272.cat
    Right click on it and choose properties.
    Select the Digital Signature Tab
    Select Advanced Micro...........
    Go to details
    Go to View Certificate.
    Choose Install Certificate.
    Select Local Machine then Continue.
    Select Place all Certificate in Following Store.
    Choose Browse and look for (Trusted Root Certification Authorities)
    Choose Continue after selecting Trusted Root
    Continue on until Installation is Complete.
    Attempt Installing the Driver Again.
     
  9. sht

    sht New Member

    Messages:
    4
    Likes Received:
    0
    GPU:
    Mobility Radeon HD 4650
    But is it not better for me to use the 13.4 Driver? Can your package do something which I can't do with the official beta? Or is it primarily meant for People with switchable graphics, for which AMD does not provide official Drivers?
     
  10. dellon132

    dellon132 Ancient Guru

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3

    -Supports AGP Graphic Cards
    -Contains a Few Extra Resolutions
    -Supports Avivo
    -Supplies Most recent Application Profiles
    -Windows 8 Support For HD 4000,3000,2000
    Includes, working Windows 8 Metro Application.
    Includes, working Flash Hardware Acceleration
    for FireFox Users.
    -Contains Support for Third Party Overclocking Software.
    -Contains Support for Legacy Switchable Graphic Cards
    -Contains HDMI Audio Option available on Catalyst Control Center
    -Unlocks 3D Application Settings for use. (not much)
    -And then there is the Dx9 Switcher......
     
    Last edited: Nov 24, 2013

  11. semisator

    semisator Member

    Messages:
    31
    Likes Received:
    0
    GPU:
    GTX 1060 6GB
    Thanks for your answers regarding safe mode installation. Back to your questions now. The complete message says:

    “NO AMD Graphics Driver is installed or the AMD Driver is not functioning properly. Please install the amd driver appropriate to your AMD hardware.”

    You are right about my display being stuck at 1024x768 or 800x600 (I can't remember now) when wddm is not installed before the modded driver.

    BTW Can be this issue when I need to install driver over existing WDDM driver cause of my eternal windows 7 problem with scrolling/full screen videos (in any resolution) lags?! This problem is driving me crazy since the first day of installing win 7 system. I get heavy laggs when I am scrolling in ANY browser or some little lags are also present in my folders as well. It's seems like there is no gpu acceleration (my hardware acceleration options is grayed out in troubleshooting tab) when my cpu peaks at 100% on flash content heavy sites on such a simple thing as scrolling (all HW acceleration in flash is turned off). NO driver I already tried official or modded solved this problem for me. I know I have only single core ancient cpu but games are working properly like in win xp the only problem is such a simple task as smooth scrolling. If anybody else had this problem and found the solution let me know. I'm so desperate I will pay you. xD :cry:
     
    Last edited: Nov 24, 2013
  12. rizlo

    rizlo Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    amd 4890
    Signature Workaround 0.2 worked for me too in win 8.1 and 7.both are x64
     
    Last edited: Nov 24, 2013
  13. jmatos72

    jmatos72 New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    Ati
    Signature Workaround 0.2 worked for me too in win 7 x64 (AMD Radeon HD 4850) .
    Thank´s.
     
    Last edited: Nov 24, 2013
  14. dellon132

    dellon132 Ancient Guru

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Hmm, what browser are you using?
    Did you try using the GPU Flash Acceleration with Firefox?
    Did you Try using Google Chrome as an alternate option?
    Does your Computer use Hyper V?

    You're, welcome. Another Experimental build will be released later today. However unlike the previous experimental build. This one can be viewed as
    the latest. (Applies to all Users)
     
  15. SamLab

    SamLab Member

    Messages:
    37
    Likes Received:
    0
    GPU:
    nVidia 640M + Intel 4000
    Dellon
    The last version which can be installed through the inf-files, instead of through AMD Setup - is a version Catalyst 12.11 Modded Driver For Legacy GPU 10.6 v11.6?
     

  16. edoantonioco

    edoantonioco New Member

    Messages:
    5
    Likes Received:
    0
    GPU:
    ati radeon hd 4200
    It does not works, at the end of the installation it says there were some warnings during installation. At the end of the xml file generated by the program says: "Driver installation: the installation failed" (same bug than I had in legacy 13.1 and 13.4). I tried to install the 13.9 version, and no warnings with it, but the pc still keep using the wddm driver. Any driver in the internet works, does somebody knows what should I do to install properly a driver in windows 8.1?
     
  17. dellon132

    dellon132 Ancient Guru

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Not sure, Once the driver installation is successful the diver can be installed via device manager.

    Hmm, Did you use both Cleaners included in the Dx9 Switcher Folder?
     
    Last edited: Nov 24, 2013
  18. dellon132

    dellon132 Ancient Guru

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    UPDATE FOR ALL SUPPORTED OS 11/24/2013

    Installation Guide
    -Download and Extract
    -Run aSimple Cleanup Utility. (Perform a Normal AMD Cleanup)
    -Run aSimple Driver Cleanup.
    Select the Cleaner you would like to use.
    >Cleaner For installing the Latest Upgradable Build
    >Cleaner For installing the Latest AMD Display Driver.
    -Install the Display Driver or the Upgradable Build Through AMD Setup
    Note: Some Users may have to rely on the Signature Workaround to
    the Display Driver into the System. Therefore Users may want
    to Use the Custom Installation method and make sure Signature Workaround
    and the Display Driver is Checked.
    -Installation Complete.

    This Update intends to make the following changes.

    Notes:
    Re-Optimize the Driver Installation Process
    Updated UPD Build Driver Version
    Implemented Backwards Compatibility Cleaning For UPD Build
    Resolved a Bug causing lost of Catalyst Control Center Settings.
    ----------------------------------------------------------------------
    -Integrates the UPD Build with the Normal Driver
    Release.
    -Integrates UPD Cleaning into the Normal Dx9 Switcher
    -Updated aSimple Driver Cleanup to Optimize UPD Cleaning
    -Added a Upgradable Driver Device Manager Cleanup
    -Added a Signature Workaround for Legacy Users Encountering Problems
    -Added Device Manager Cleanup for the Signature Workaround
    -Attempts to resolve a Bsod Bug for HD 5000 and 6000 Users.
    -Removed Launch.exe from driver Cleanup Process
    -Attempts to resolve a bug in which the 32Bit installer could not be
    found in AMD Install Manager.
    -Updated Some Driver related Components.
    -Added the Latest Application Profile

    Note:
    -Users can use the iAMD Version Changer to change there Catalyst version
    from 12.11 to AMD Catalyst 13.11.
    -Switchable Graphics Users should provide a detail feedback stating how the latest driver functions on their setup.

    Pending Changes
    -Adding a Low Powered Switcher for Mobility HD 4000 Users and Below.
    -Adding a Switcher Capable of allowing Users to revert to a Previously
    Working\Stable Build. (For HD 2000 Series - HD 4000 Series)

    Download Link: (NEW)
    ATI Catalyst 12.11 B11 HotFix 10 P6 V11.10.6.7.7.6All Supported OS
     
    Last edited: Nov 25, 2013
  19. Menpower

    Menpower Active Member

    Messages:
    61
    Likes Received:
    0
    GPU:
    Sapphire R9 290 TRI-X OC
  20. SamLab

    SamLab Member

    Messages:
    37
    Likes Received:
    0
    GPU:
    nVidia 640M + Intel 4000
    yes - I meant installation through device manager - the last version for this Catalyst 12.11 Modded Driver For Legacy GPU 10.6 v11.6 or new versions too can be established through device manager?
     

Share This Page