Hey everyone, I was hoping you could help me with a driver problem I'm having with my ATI Mobility HD 2300 card. I'm using Catalyst 9.3 drivers modded through Mobility Modder. I have a widescreen LCD (Samsung 2223NW) connected to my laptop through VGA (unfortunately, the monitor doesn't support DVI). At its native resolution (1680*1050) everything works fine. However, at non-native resolutions like 1280*800 (which I want to use in games because, well, HD 2300 :bang, for some reason the graphics card automatically extends it to 1280*1024 with black bars above and below it. The result is that I can't stretch the image to fullscreen on my external monitor. Because of the VGA connection, Control Center doesn't give any GPU scaling options. I have tried turning off EDID and manually setting the monitor's max resolution to 1280*800 - didn't work. I didn't find any options whatsoever to solve the problem in Control Center. I also briefly tried using Powerstrip, but that didn't present a solution. Older Catalyst drivers, such as the latest Omega driver, that still use Catalyst Control Panel, do have the option I need. Somewhere in there there is an option saying "preserve widescreen aspect ratio" which I can turn off in order to get the right result. However, in Control Center it seems to be on by default and I can't change it anywhere. So my questions are as follows: - Is there any way to get my card to output the correct resolution over VGA in Control Center? - If not, is there any way to use Catalyst Control Panel instead of CCC in combination with the latest Catalyst display drivers? And lastly, assuming I can't solve this problem at all, do you think it would be a big difference in performance if I had to keep using old (based on 7.1 i think) Omega drivers as opposed to the latest official Catalysts? Thanks in advance.