ASUS To Release ROG RYUJIN II 240 LCS, has 3.5 inch LCD mounted

Discussion in 'Frontpage news' started by Hilbert Hagedoorn, Jan 21, 2021.

  1. Hilbert Hagedoorn

    Hilbert Hagedoorn Don Vito Corleone Staff Member

    Messages:
    40,308
    Likes Received:
    8,851
    GPU:
    AMD | NVIDIA
  2. cucaulay malkin

    cucaulay malkin Master Guru

    Messages:
    956
    Likes Received:
    416
    GPU:
    GTX1070 STRIX
    okay but is it 360hz hdr10 ?
     
  3. insp1re2600

    insp1re2600 Maha Guru

    Messages:
    1,496
    Likes Received:
    547
    GPU:
    3090 Vision OC 24GB
    i had the first 360 ryujin and i must say, the armoury crate software made it unbearable, so many problems all the way through. After a few months using it the oled screen had very bad burn in too, i wouldnt bother with it again. Shame as it looked good. Also the silver finish on the screen, i wiped it once and the silver mirror effect wiped off like some cheap paint.

    Ended up switching to a corsair aio and a rasp pi 5 inch screen to show temp monitoring which looks better anyway.
     
  4. Dazz

    Dazz Master Guru

    Messages:
    907
    Likes Received:
    98
    GPU:
    ASUS STRIX RTX 2080
    Not had issues with mine and have had it about 2 years now, but then i noticed the silver would be a nightmare for finger prints so i make sure not to touch it so never had the need to clean it so far anyway. As i have the claymore Keyboard, Spatha mouse, Strix X570 motherboard and Strix RX2080 i kinda need to use the armory software which can be a little temperamental at times.
     

  5. insp1re2600

    insp1re2600 Maha Guru

    Messages:
    1,496
    Likes Received:
    547
    GPU:
    3090 Vision OC 24GB
    No burn in? I threw it in the trash
     
  6. Turbogear

    Turbogear Active Member

    Messages:
    76
    Likes Received:
    39
    GPU:
    Radeon 6800XT
    Maybe these LCDs that ASUS adds sometime to computer components like this aio and power supplies look cool but in my view they are for many of us useless.
    Except if one has his tower sitting on the table where one can look inside the case when gaming. :rolleyes:
    Otherwise if one has big tower like mine Cooler Master Cosmos C700p you won't bend down the table to look what are temperatures every short while.

    I have custom watercooled setup and I do monitoring of water temperature, GPU, CPU temperatures, clocks and water flow rate but for that I use a small LCD that sits on my table. :D

    I use Aquacomputer Vision.
    https://shop.aquacomputer.de/product_info.php?products_id=3595
     
    tfam26 likes this.
  7. fry178

    fry178 Ancient Guru

    Messages:
    1,661
    Likes Received:
    246
    GPU:
    2080S WaterForceWB
    probably still asetek based, so, not interested.
    and even if newer ones are decent, i don't trust a pump that needs 6 or 7 gens to get "decent" regarding quality.

    @Turbogear
    all my cases in the past 5y are on the desk, including the level 20.. :D
     
    Turbogear likes this.
  8. tailspin

    tailspin Member

    Messages:
    28
    Likes Received:
    5
    GPU:
    ARES II 6GB
    They just need to release a white version... ;)
     
  9. tfam26

    tfam26 Master Guru

    Messages:
    236
    Likes Received:
    115
    GPU:
    nvidia 30 series

    If you just need Aura it has a standalone version that's less intrusive:

    https://dlcdnets.asus.com/pub/ASUS/mb/14Utilities/Lighting_Control_1.07.79_V2.2.zip
     
    Dazz likes this.
  10. Junglist724

    Junglist724 Member

    Messages:
    12
    Likes Received:
    2
    GPU:
    2080ti
    Why NF-F12 fans? They're one of the worst radiator fans on the market.
     

  11. Dazz

    Dazz Master Guru

    Messages:
    907
    Likes Received:
    98
    GPU:
    ASUS STRIX RTX 2080
    I just stared at the screen it seems i do have some minor burn in of the eye possible because i may have had that set for a year, i don't like the software so just normally leave it on default with a moving.
     
  12. insp1re2600

    insp1re2600 Maha Guru

    Messages:
    1,496
    Likes Received:
    547
    GPU:
    3090 Vision OC 24GB
    i had it on sensors alternating different ones, still got burn in, they actually RMA them due to the burn in, there was a firmware flash for it last year, maybe wait a little and rma, you may get the new type. ha
     
    Dazz likes this.
  13. Dazz

    Dazz Master Guru

    Messages:
    907
    Likes Received:
    98
    GPU:
    ASUS STRIX RTX 2080
    Good point it does have a 3 year warranty lol
     

Share This Page