ASRock Z77 Extreme11 E-ATX Motherboard

Discussion in 'Frontpage news' started by Hilbert Hagedoorn, Oct 19, 2012.

  1. Hilbert Hagedoorn

    Hilbert Hagedoorn Don Vito Corleone Staff Member

    Messages:
    44,374
    Likes Received:
    11,241
    GPU:
    AMD | NVIDIA
    ASRock shows off their newest E-ATX motherboard, the Z77 Extreme11. Based on Intel Z77 Express Chipset, the board supports for Intel LGA1155 processors and features four DDR3 DIMM memory slots (up to 32GB RAM), three PCI-Express 3.0 x16 slots, one PCI-Express 2.0 x16 slot, three PCI-Express 2.0 x1 slots and one mini PCI-Express x1 slot.

    ASRock Z77 Extreme11 E-ATX Motherboard
     
  2. SLI-756

    SLI-756 Banned

    Messages:
    7,604
    Likes Received:
    0
    GPU:
    760 SLI 4gb 1215/ 6800
    Only one thing that would add sparkle to a board like this, at least it was the first thing that popped into MY mind:
    Yes ladies and gentlemen, the gtx 780. :p
     
  3. BLEH!

    BLEH! Ancient Guru

    Messages:
    6,293
    Likes Received:
    304
    GPU:
    Sapphire Fury
    I first saw the X79 version of this. It has the INSANE RAID chip on there which gives ridculous bandwidth. If I win the lottery, I'm SO having this board :D
     
  4. Sever

    Sever Ancient Guru

    Messages:
    4,826
    Likes Received:
    0
    GPU:
    Galaxy 3GB 660TI
    hmm, i dont really see the point of this board over the extreme9 that i have. the main difference i can see is the two extra sata ports. everything else is the same except the extreme9 has 5x pcie3.0 16x slots (slot 2 always you to bypass the multiplexer chip) and the extreme9 supports 4way SLI at pcie3.0 8x whereas this extreme11 only supports 3 way SLI. thats probably because this extreme11 sacrifices 8x pcie3.0 lanes for the extra sata ports.
     

  5. -=WolverinE=-

    -=WolverinE=- Active Member

    Messages:
    76
    Likes Received:
    0
    GPU:
    Asus GTX560Ti DirectCu II
    The extreme11 has LSIā„¢ SAS 2308 PCIe 3.0 Controller, dual-stack mosfet and 2OZ Copper PCB...
     

Share This Page