Amernime Zone AMD Software: Adrenalin / Pro Driver - Release Discovery 22.12.2 WHQL

Discussion in 'Videocards - AMD Radeon Drivers Section' started by mylipho15, Feb 5, 2021.

?

Are you satisfying using NimeZ AMD Radeon Drivers?

Poll closed May 17, 2021.
  1. Yes

    47 vote(s)
    77.0%
  2. No

    14 vote(s)
    23.0%
  1. MADba11

    MADba11 New Member

    Messages:
    5
    Likes Received:
    1
    GPU:
    RX 470 4Gb
    I get that, but the cli setup has at least a remark that amdkmd mpo "driver" option is a default one. It's that to check it, you have to find it in advanced setup first. Which is not new user friendly.
    I get that too, but most options in standard installer already have some description in the CLI setup. And they even were shown in the previous version of standard installer. But the new standard installer has only the "?" buttons and they mostly have too little information in comparison to CLI setup descriptions. Like previously the Radeon UI Profiles was showing which profile activated Overlay and Metrics, but now it does not and I had to choose one by memory.
    It would help so much to improve user experience if the "?" prompts had as much info as CLI has.
    I'm sure the UX would improve in time, but I thought I'd provide feedback anyway. Especially since I'm not qualified to do feedback on actual drivers lol. The drivers working fine I think. They fixed Genshin Impact textures problem for me at least. The only gripe I have is that if I uninstall em there are many remnants left in the drivers store and device manager. Not critical, but still.
     
  2. barkmarkin

    barkmarkin Member

    Messages:
    13
    Likes Received:
    0
    GPU:
    5700XT Nitro Plus
    I installed the lastest one to my 6800XT like this, What options should I chose to get the most out of it? or is it fine to leave it like this, I assume it installs defaults?.

    Untitled.jpg
     

    Attached Files:

  3. zingzs

    zingzs Master Guru

    Messages:
    861
    Likes Received:
    327
    GPU:
    RXVega11|6700XT
    the default settings (recommended) is more than enough
     
  4. zingzs

    zingzs Master Guru

    Messages:
    861
    Likes Received:
    327
    GPU:
    RXVega11|6700XT
    The GUI mode is intended for easier setup without messing anything, useful for someone who doesn't know which tweaks are good for most systems ("recommended" is the default ones)

    To be honest, I rather go into CLI mode if I wanna know alot more, because at the beginning development, CLI is more powerful than GUI, yet you need some learning curves to master that
     

  5. barkmarkin

    barkmarkin Member

    Messages:
    13
    Likes Received:
    0
    GPU:
    5700XT Nitro Plus
    So I have a question, I installed just like in the picture, Without selecting anything, Do I have to chose anything for it to install default or is installing exactly like I have in the picture the default reccomended way?
     
  6. zingzs

    zingzs Master Guru

    Messages:
    861
    Likes Received:
    327
    GPU:
    RXVega11|6700XT
    choose recommended option for all of that settings (for example, the GPU queue extension recommended setting is Regular, so choose regular)
     
  7. knasiotis

    knasiotis New Member

    Messages:
    4
    Likes Received:
    0
    GPU:
    rx 580 4gb & 3060ti
    I tried upgrading to nimez after chipset drivers, screen tears errors and black screen. However, after clean installing nimez I can now downgrade parts via the chipset installer? Do you believe there is merit in trying for the freesync option? Would any of these options bring freesync? Does it only have to do with the display driver?

    EDIT: sorry for the greek in the attachment
     

    Attached Files:

  8. MADba11

    MADba11 New Member

    Messages:
    5
    Likes Received:
    1
    GPU:
    RX 470 4Gb
    And that is exactly, what I'm talking about. The new inexperienced user should be told what these tweaks are, or at least what the default choices are, so that he won't select them at random or something.
    But in some tweaks neither the menu options nor the "?" buttons make it clear what options are "default" ones. Would the tweaks be set to default ones if you don't choose anything and leave them at "select" option? I don't think installer doesn't clarifies it in any way. What about Radeon Profiles? What should you choose there? There is no explanation at all as to what it does.
    Right now I just don't see the advantage of the new GUI setup over the old one, since the old one explained the tweak choices better.
    It's easily fixable though. Just copy the tweaks descriptions from CLI into GUI mode's "?" prompts.
     
  9. REDDLINE

    REDDLINE New Member

    Messages:
    7
    Likes Received:
    0
    GPU:
    XFX AMD RADEON RX 6
    Hi recently installed 22.11.2SE yesterday, saw it was reuploaded today maybe 30 minutes ago, was there any changes made that I should reinstall?
    Also what's the difference between V7-22.11.2SE and V7-22.11.2.
     
  10. energie80

    energie80 New Member

    Messages:
    8
    Likes Received:
    1
    GPU:
    6950xt
    lost 15 fps on mw2 benchmark over amd oem drivers, any idea?
     
    erfan likes this.

  11. erfan

    erfan New Member

    Messages:
    5
    Likes Received:
    0
    GPU:
    5700xt
    Yes me too!
    AMD 22.11.2 i got : 190
    NimeZ 22.11.2 with tweaks: 179 and w/o tweaks 175!
    it's weird!
     
  12. Ko3MoS

    Ko3MoS New Member

    Messages:
    5
    Likes Received:
    0
    GPU:
    AMD
    I apologise if my question was asked previously by anyone else. It's been awhile since (GCN Pre-Polaris) got some love and I don't mean to rush anything, but any news about a new driver for GCN 1/2/3 architecture ?
     
  13. zingzs

    zingzs Master Guru

    Messages:
    861
    Likes Received:
    327
    GPU:
    RXVega11|6700XT
    saying it is weird without explaining what tweaks you applied is much easier than fix it. Please tell it more detailed, we are not witches here
     
  14. zingzs

    zingzs Master Guru

    Messages:
    861
    Likes Received:
    327
    GPU:
    RXVega11|6700XT
    I think you overlooked it at the dropdown boxes, it's clear there are "recommended" options when you click on it. Even with or without good explanation, more people will ask about it, unless they want to observe it by themselves

    "Don't see any advantage"
    Express Installation is one of them :p
     
  15. energie80

    energie80 New Member

    Messages:
    8
    Likes Received:
    1
    GPU:
    6950xt
    the one recommended in the youtube vid
     

  16. zingzs

    zingzs Master Guru

    Messages:
    861
    Likes Received:
    327
    GPU:
    RXVega11|6700XT
    - try to tune down MPO level (either 3/5/driver level only)
    - I think you need to observe more tweaks at nzsetupCLI > GPU tweaks (last number at the bottom). And there are new tweaks at page 3, too.

    this time, I don't need to help you, but you help me to figure out new tweaks (if you have willings to try)
     
  17. zingzs

    zingzs Master Guru

    Messages:
    861
    Likes Received:
    327
    GPU:
    RXVega11|6700XT
    - Primitive Shader
    - NGG (Next Gen Geometry)
    - GPU Culling
    - GPU Queue Extension Mode
    - Conservative Rasterization
    - Driver Kernel Logging
     
  18. mylipho15

    mylipho15 Ancient Guru

    Messages:
    1,521
    Likes Received:
    1,327
    GPU:
    AMD Radeon HD 8790M
    Polaris/Vega/Navi 22.11.2 Discovery Edition - Retail Driver Released
    Changelog similar to SE Edition

     
  19. mylipho15

    mylipho15 Ancient Guru

    Messages:
    1,521
    Likes Received:
    1,327
    GPU:
    AMD Radeon HD 8790M
    No Changes in SE Driver, just Quality Reupload for Faster Download Speed

    OEM Driver and AMD Retail Driver.
     
    Last edited: Dec 6, 2022
    terry_bogard_sv and REDDLINE like this.
  20. REDDLINE

    REDDLINE New Member

    Messages:
    7
    Likes Received:
    0
    GPU:
    XFX AMD RADEON RX 6
    Awesome, thank you!
     

Share This Page