Radeon-ID Community Driver: Hybrid - Release Nebula 23.11.1 WHQL

Ok thanks imma give it a try

 

I keep getting install server not responding. Any fix for this?

 

This may problem from the windows. You need run cmd as admin then "chkdsk C:" to check file corruption, then "sfc /scannow" to check windows file structure

 

GTX 750 TI have Maxwell chip inside so this means it's still supported by Nvidia + it works really good with DX 12 titles

 

Also the Farming SImulator 22 optimisations came from 21.11.3, and Nimez is at 21.11.2, so guys be patient.

 

Been using the modded driver for 2 weeks just fine. but just today Easyanticheat has detected the modded drivers and refuses to launch the game New World...any work around ?

 

Using 3rd party software like Ccleaner, Clean Master, Wise Cleaner? That's why WHQL signature missing because driverstore cleaning. You have to repair the whql Again.

 

The Repair worked fine thanks have no 3rd party cleaning programs installed so not sure whats caused it

 

DirectX12 has multiple feature levels. Those being 11_0, 11_1, 12_0, 12_1 and 12_2 (last one is DX12 Ultimate)
GTX 400 through 500 support DX12, feature level 11_0 (so Fermi). Keplar, so GTX 600 to 700 supports 12_0. GTX 750/Ti are not Keplar, are Maxwell Gen1, which are DirectX12 Feature Level 12_1.

A game might say "requires DX12", when in fact it requires DX12_1 specifically. Keplar GPUs for example or AMD GCN1.0 GPUs can't play Death Stranding on PC because that game requires DX12_1 feature support.

GT 730 in this case is probably Fermi based.

 

Dear Developer,

I am one of the many owners of the ASUS AMD Advantage Edition laptop G513QY, there is a whole discord server community of this laptop owners that suffer from GPU related reboots issue.

Basically, there is a bug that so far neither ASUS or AMD fixed or even admitted publicly that this bug exists. Instead people getting ASUS RMAs and new units getting same reboots.

Now at the Discord community we found workaround, and we thought maybe you could help fixing it at the AMD control panel level.

How replicate the issue on this particular laptop model:

1. Run Blender GPU Render
or
2. Run a heavy game

Within 1-30 minutes, the dGPU (RX6800M) would go sleep and laptop crash and reboots.
It --seems-- as the system not properly transitioning the GPU tasks from dGPU to iGPU which causes this crash and reboot.

Workaround we found:

1. Run GPU-Z in background and keep it running while and after gaming/render, will keep RX6800M awake and avoid reboots.
2. Installing ASUS GPU Tweaker 3, will keep RX6800M Awake and wont reboot.

Problems:

1. GPU-Z as long as running, will keep rx6800m awake which reduces battery life.
2. ASUS GPU Tweaker 3 will keep rx6800m awake which reduces battery life.

Solutions:

If we dont use ASUS GPU Tweaker 3 and instead sticking to GPU-Z we close GPU-Z whenever we need long battery life (lets say working outside) and keep it ON when we plugged to AC. Alternatively, if we want game while on battery and don't want a reboot to occur, we can keep GPU-Z open.

Now that you understand the problem, if you could work-out a solution within the driver/control panel/maybe some little tool in task-bar with that we could press on/off, to make a solution more reliable and easy for everyone, would be interesting.

We got a great community that would beta test this for you/with you, discord: https://discord.gg/NwWySb43
with many owners of this laptop from worldwide.

I will truly appreciate your feedback, we hope for the best from you soon!

Thank you,

 

The only one solution is Disabled ULPS though registry which this driver mod have disabled at driver level.
Yes disabling ULPS fixes the system reboot, but the RX 6800 will not sleep when idle.
Only difference when idle GPU clock are in low state mode so this shouldn't drain battery to much.
To keep battery little longer while RX 6800M still alive even not using it, you should configure Switchable Global Settings on battery to Optimize Power Savings

 

Thank you so much for your reply, but this option not available here (Win 11):
https://i.imgur.com/O4QMm7l.png

Maybe its possible for you to add hotkey for this function? SO when we press the key it switches from max perf to battery saving?

 

I have this settings on win 11 too, do you installed the chipset driver?

*since my laptop doesn't have TPM 2.0 on it and Riot Games need to enabled that option so i downgraded back to win 10

 

AMD chipset drivers installed yes.

p.s. if you could join us... https://discord.gg/NwWySb43
Many guys here waiting for a good solution, maybe with your help we could... make it

 

try disable the ULPS through registry, in 0000 and 0001. Then Set the power options Balanced (sometimes called AMD Ryzen Balanced)
Make sure on battery move the slider to the left (A), and when on AC plugged power move slider to the right (B)
(A) (B)

 

Its already in 000 and 001:
https://i.imgur.com/jkpZNbm.png

But I cant find this slider in my OS...... maybe you could gain access to laptop with reboots to debug what exactly happens then can try fix it via drivers?

 

Could speak to guys give you remote access to unit or even few with reboots issue.

 

Any ideas/suggestions welcomed!

 

Try deleting in DDU
And install step by step.
If you still have an ERROR, try FIX INSTALL the CCC2 file