AMD Software: Adrenalin Edition 23.7.2 - Driver Download and Discussion

FIXED ISSUES

• Stuttering may be observed while playing Call of Duty®: Modern Warfare® II with Radeon™ Anti-Lag enabled.
• Intermittent corruption may be observed around some player models while playing Hatsune Miku: Project DIVA Mega Mix+™ on some AMD Graphics Products, such as the Radeon™ RX 6900 XT.
• Higher than expected GPU Memory Utilization when using certain Record and Stream settings such as Instant Replay.
• Display signal may be lost after switching windows on certain Adaptive-Sync enable displays on some AMD Graphics Products, such as the Radeon™ RX 7900 XTX.
• Audio may intermittently become out of sync with video when recording from AMD Software: Adrenalin Edition with AVC and HEVC codecs.

KNOWN ISSUES

• Performance Metrics Overlay may report N/A for FPS on various games.
• High idle power has situationally been observed when using select multi-display setups with mixed high-resolution and high refresh rate displays on Radeon™ RX 7000 series GPUs.
• Intermittent corruption may be observed playing Rocket League™ with Bloom set to Off on some AMD Graphics Products, such as the Radeon™ RX 6900 XT.
• Intermittent application hang for a few seconds may be observed while playing RuneScape™ on some AMD Graphics Products, such as the Radeon™ RX 5700 XT.
• Application crash or driver timeout may be observed while playing Ratchet & Clank™: Rift Apart with Ray-Tracing and Dynamic Resolution Scaling enabled on some AMD Graphics Products, such as the Radeon™ RX 7900 XTX.
• Audio may intermittently become out of sync with video when recording from AMD Software: Adrenalin Edition with AV1 codec.

PACKAGE DETAILS
AMD Software: Adrenalin Edition 23.7.2 Driver Version 23.10.32.02 for Windows® 10 and Windows® 11 (Windows Driver Store Version 31.0.21023.2010).

https://www.guru3d.com/files-details/amd-radeon-software-adrenalin-23-7-2-download.html

 

@The Creator imma need you to do your magic big dawg

 

After installing/upgrading Adrenalin Edition 23.7.2, please make sure the OpenCL driver has been loaded correctly. If you open GPU-Z to the OpenCL tab, OpenCL shows "Not supported", please DDU clean up the driver and restart the system, and reinstall Adrenalin Edition 23.7.2 can be solved.

 

Open CL ok here:

 

Everthing fine on 6900XT. Funny, i have newer 31.0.21.023.2012 AMD Windows Driver Version compared to @Macer

Spoiler

 

Same here.

 

Here you are: AMD Adrenalin 23.7.2 Mod.7z

It's modified with the newer Vulkan and DX UMD modules from UWP 39003 driver. The OpenGL is already the same.
I haven't replaced the AMF and OpenCL modules.


The driver version in the .inf file is:
DriverVer=07/20/2023, 31.0.21023.2010
GPUz shows the same.

But on screen in Radeon Software:
AMD Windows Driver Version 31.0.21023.2012
I couldn't find this version in any of the conf files (bin64 and config directories).


I had forgotten that Canary Win11 25905 build has the safe mode completely broken. When I try to use DDU or AMDCleanupUtility.exe with a reboot in safe mode - the computer hangs during the boot. After the reset, the computer tries again to boot in safe mode so I go in an endless cycle.

The solution is to boot from the Win11 installer flash drive (or from another partition with Windows) and format the EFI partition (to clean the safe mode flag) and link it again to the installed Windows (with bcdboot.exe). This way the computer boots again in normal mode.

Of course, AMD still doesn't want to make the driver compatible with the Canary branch of Win11 and on every boot, I still get WattMan reset:



At least MS has fixed the broken DX12 rendering in the current build.

 

hags hags hags
Versión del controlador de Windows de AMD
31.0.21023.2010
what this means

 

Updated NvCustomer today. Ensure AMD Installer correctly applies OpenCL driver paths. Now checks for path existence and fixes it automatically.

NvCustomer v10.5.1.42 Stable Release

• Added OpenCL driver validation and fixes features. Default: enabled. OpenCL paths are now validated, will automatically fix paths if wrong and ensure OpenCL drivers are loaded correctly.

AMD Radeon Software Customize Setup v10.5.1 - More Radeon Software Installation Options | guru3D Forums

 

Still no support for the 7040HS line... (Edit: There's partial support for the 7040HS line)

No GPU driver for the 780M, no motherboard drivers, no AI chip driver...

AMD is really dropping the ball on this one...!

Edit: Thanks for the info, HD64G!
It seems that I stand corrected! Hopefully this driver fixes quite a few issues that people are having with them!

 

Anybody still having an issue with "ffmpeg -hwaccel vulkan"?

doing 'ffmpeg -hwaccel vulkan -i "inputfile" -c:v hevc_amf -an -sn "outputfile.mkv"' (only encode video, no audo or subtitle tracks) makes the screen go black and lock up the system on an RX 6700

I added the -an and -sn flags to rule those out, and have tried various files.

-hwaccel d3d11va still works as usual, but I was looking forward to using vulkan because that was actually touted in the release notes as now being added (https://www.amd.com/en/support/kb/release-notes/rn-rad-win-23-7-1 points to https://www.amd.com/en/support/kb/release-notes/rn-rad-win-vulkan)

(exact issue was present 23.7.1, but waited to see if 23.7.2 would've addressed this)

 

Ofcourse gpu drivers crash with ratchet and clank and RT on
So they disabled RT out of protest while AMD probably still trying to ship it.

I see installer got new option as well now to share diagnostics during install

 

https://videocardz.com/newz/amd-rel...eon-700m-phoenix-driver-ryzen-7-7840s-spotted

 

I edited my previous comment.
It seems that I stand corrected! Hopefully this driver fixes quite a few issues that people are having with them!
Thanks for the info, HD64G!

Edit: Now I'd say only motherboard and AI drivers are missing?

 

What's ffmpeg version and what output do you have with these params?

Code:

ffmpeg -hide_banner -v verbose -init_hw_device list
ffmpeg -hide_banner -v verbose -init_hw_device vulkan

If there is Vulkan device available and if it's initiated properly, it should be working

Spoiler: ffmpeg output with RADV on Linux

[xxxxxx~]$ ffmpeg -hide_banner -v verbose -init_hw_device list
Supported hardware device types:
vdpau
cuda
vaapi
qsv
drm
opencl
vulkan

[xxxxxx~]$ ffmpeg -hide_banner -v verbose -init_hw_device vulkan
[AVHWDeviceContext @ 0x5650e4e75700] Supported validation layers:
[AVHWDeviceContext @ 0x5650e4e75700] VK_LAYER_VALVE_steam_overlay_32
[AVHWDeviceContext @ 0x5650e4e75700] VK_LAYER_VALVE_steam_overlay_64
[AVHWDeviceContext @ 0x5650e4e75700] VK_LAYER_VALVE_steam_fossilize_32
[AVHWDeviceContext @ 0x5650e4e75700] VK_LAYER_VALVE_steam_fossilize_64
[AVHWDeviceContext @ 0x5650e4e75700] VK_LAYER_MANGOHUD_overlay
Last message repeated 1 times
[AVHWDeviceContext @ 0x5650e4e75700] VK_LAYER_MESA_device_select
[AVHWDeviceContext @ 0x5650e4e75700] VK_LAYER_KHRONOS_validation
[AVHWDeviceContext @ 0x5650e4e75700] GPU listing:
[AVHWDeviceContext @ 0x5650e4e75700] 0: AMD Radeon Graphics (RADV RENOIR) (integrated) (0x1636)
[AVHWDeviceContext @ 0x5650e4e75700] 1: llvmpipe (LLVM 16.0.6, 256 bits) (software) (0x0)
[AVHWDeviceContext @ 0x5650e4e75700] Device 0 selected: AMD Radeon Graphics (RADV RENOIR) (integrated) (0x1636)
[AVHWDeviceContext @ 0x5650e4e75700] Queue families:
[AVHWDeviceContext @ 0x5650e4e75700] 0: graphics compute transfer sparse (queues: 1)
[AVHWDeviceContext @ 0x5650e4e75700] 1: compute transfer sparse (queues: 4)
[AVHWDeviceContext @ 0x5650e4e75700] Using device extension VK_KHR_push_descriptor
[AVHWDeviceContext @ 0x5650e4e75700] Using device extension VK_KHR_sampler_ycbcr_conversion
[AVHWDeviceContext @ 0x5650e4e75700] Using device extension VK_KHR_synchronization2
[AVHWDeviceContext @ 0x5650e4e75700] Using device extension VK_KHR_external_memory_fd
[AVHWDeviceContext @ 0x5650e4e75700] Using device extension VK_EXT_external_memory_dma_buf
[AVHWDeviceContext @ 0x5650e4e75700] Using device extension VK_EXT_image_drm_format_modifier
[AVHWDeviceContext @ 0x5650e4e75700] Using device extension VK_KHR_external_semaphore_fd
[AVHWDeviceContext @ 0x5650e4e75700] Using device extension VK_EXT_external_memory_host
[AVHWDeviceContext @ 0x5650e4e75700] Using device: AMD Radeon Graphics (RADV RENOIR)
[AVHWDeviceContext @ 0x5650e4e75700] Alignments:
[AVHWDeviceContext @ 0x5650e4e75700] optimalBufferCopyRowPitchAlignment: 1
[AVHWDeviceContext @ 0x5650e4e75700] minMemoryMapAlignment: 4096
[AVHWDeviceContext @ 0x5650e4e75700] minImportedHostPointerAlignment: 4096
[AVHWDeviceContext @ 0x5650e4e75700] Using queue family 0 (queues: 1) for graphics
[AVHWDeviceContext @ 0x5650e4e75700] Using queue family 1 (queues: 4) for compute transfers
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...

Use -h to get full help or, even better, run 'man ffmpeg'

//Also, in which format is that input file?

 

My system hangs (reset needed)! I have tried 23.7.2 (AMF 1.4.30 / Vulkan 2.0.270) and UWP 39003 (AMF 1.4.31 / Vulkan 2.0.271).

Spoiler: ffmpeg -version

ffmpeg version 2023-07-19-git-efa6cec759-full_build-www.gyan.dev Copyright (c) 2000-2023 the FFmpeg developers
built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 --enable-libaribcaption --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom --enable-libjxl --enable-libopenjpeg --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libharfbuzz --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libcodec2 --enable-libilbc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
libavutil 58. 14.100 / 58. 14.100
libavcodec 60. 22.100 / 60. 22.100
libavformat 60. 10.100 / 60. 10.100
libavdevice 60. 2.101 / 60. 2.101
libavfilter 9. 8.102 / 9. 8.102
libswscale 7. 3.100 / 7. 3.100
libswresample 4. 11.100 / 4. 11.100
libpostproc 57. 2.100 / 57. 2.100

Spoiler: ffmpeg -hide_banner -v verbose -init_hw_device list

Supported hardware device types:
cuda
dxva2
qsv
d3d11va
opencl
vulkan

Spoiler: ffmpeg -hide_banner -v verbose -init_hw_device vulkan

[AVHWDeviceContext @ 0000020ccc9ea5c0] Supported validation layers:
[AVHWDeviceContext @ 0000020ccc9ea5c0] VK_LAYER_AMD_switchable_graphics
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using instance extension VK_KHR_portability_enumeration
[AVHWDeviceContext @ 0000020ccc9ea5c0] GPU listing:
[AVHWDeviceContext @ 0000020ccc9ea5c0] 0: AMD Radeon RX 7900 XT (discrete) (0x744c)
[AVHWDeviceContext @ 0000020ccc9ea5c0] Device 0 selected: AMD Radeon RX 7900 XT (discrete) (0x744c)
[AVHWDeviceContext @ 0000020ccc9ea5c0] Queue families:
[AVHWDeviceContext @ 0000020ccc9ea5c0] 0: graphics compute transfer sparse (queues: 1)
[AVHWDeviceContext @ 0000020ccc9ea5c0] 1: compute transfer sparse (queues: 2)
[AVHWDeviceContext @ 0000020ccc9ea5c0] 2: transfer sparse (queues: 2)
[AVHWDeviceContext @ 0000020ccc9ea5c0] 3: (queues: 2)
[AVHWDeviceContext @ 0000020ccc9ea5c0] 4: decode (queues: 2)
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using device extension VK_KHR_push_descriptor
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using device extension VK_KHR_sampler_ycbcr_conversion
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using device extension VK_EXT_descriptor_buffer
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using device extension VK_EXT_shader_atomic_float
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using device extension VK_EXT_external_memory_host
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using device extension VK_KHR_external_memory_win32
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using device extension VK_KHR_external_semaphore_win32
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using device extension VK_KHR_video_queue
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using device extension VK_KHR_video_decode_queue
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using device extension VK_KHR_video_decode_h264
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using device extension VK_KHR_video_decode_h265
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using device: AMD Radeon RX 7900 XT
[AVHWDeviceContext @ 0000020ccc9ea5c0] Alignments:
[AVHWDeviceContext @ 0000020ccc9ea5c0] optimalBufferCopyRowPitchAlignment: 1
[AVHWDeviceContext @ 0000020ccc9ea5c0] minMemoryMapAlignment: 64
[AVHWDeviceContext @ 0000020ccc9ea5c0] nonCoherentAtomSize: 128
[AVHWDeviceContext @ 0000020ccc9ea5c0] minImportedHostPointerAlignment: 4096
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using queue family 0 (queues: 1) for graphics
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using queue family 2 (queues: 2) for transfers
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using queue family 1 (queues: 2) for compute
[AVHWDeviceContext @ 0000020ccc9ea5c0] Using queue family 4 (queues: 2) for decode
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...

Use -h to get full help or, even better, run 'man ffmpeg'

If I use d3d11va instead of vulkan, then everything is ok. It looks like Vulkan hardware decoding doesn't work properly. I bet it's AMD's fault, not FFmpeg's.

 

2 hours left to unlock...

 

@Macer but unfortunately without AMD RT

 

It doesn't matter
If I want to experience RT. I have another computer with RTX 4090.

 

Has the Junction temperature been removed from tuning control?