Discussion in 'Videocards - AMD Radeon Drivers Section' started by mtrai, Aug 12, 2019.
Using 2 hdmi outputs, both missing pixel format setting.
Come on amd, fix this please.
Anyone having Stop Errors with this driver on a 2200G?
No issues with the previous drivers but I'm lucky to post to the desktop before it crashes. No OC either just straight up default settings.
My wife's system is
ASUS B450M-A/CSM latest Bios and Chipsets
2X8GB 3200Mhz TridentZ RGB
850W 80+ Gold
850 250GB Evo + 1TB HDD
Not sure if it's a APU related issue or if others are having similar problems.
19.8.1 new date 20/8, did a custom > clean install.
Pixel Format is there, but not sure if this is because I had hybrid 7.5/8.1 before.
Edit: don't bother with it, seems the overlay hotkey is showing as 'none'.
Back to my hybrid I go.
@JonasBeckman Can u check the changes?
19.8.1 released again it seems 20/8..
From what I am hearing it's WHQL now but I can look if there's anything else.
EDIT: Well that and a number of GPU's got this setting added to them instead of just the newer ones.
19.8.1 - 20/8 - Cleaned installed on my R9 380.
Pixel Format is back, all good!
I can confirm that. Tested some firestrike and im getting 1500 more points in physics score then i was getting before with my 3930k.
It's WHQL now
More stable Voltages for Vega (less needed)
Nice driver overall, temps goes down by ~5-8 deg. cels. (amb. similar to yesterday ~24deg.)
Played BFV Conq/TDM today and didn't hear my GPU
After not so fast 19.7.x this one is on par with 19.6.2 WHQL (DX9/11)
That's why i love ATIs WHQL.
Thanks for info guys. Installed and I got fps boost in Tarkov. A month or two ago I actually lost some fps and now gained it back and then maybe even some more. Seems like a good driver.
Not supposed to matter if it is WHQL or not, according to some.
This one's labeled as beta on the site, even though says WHQL on my end also. Sloppy by AMD.
I find this anyone have a clue?
My sapphire 580 with samsung memory that have lower asic quality and need more vid voltage under some graphic intensive games that hit the power limit wall and change very quick mhz every ms in hwinfo i see few memory errors.(3 memory errors in 2 hour gaming bfv)
If i change the power limit to +10% they can keep the maximum boost clock(1366) and there no exist any memory errors in hware info as they cant hit the power limit.
Thing is that on 580 memory voltage is tied to the core voltage. So lets say your core voltage is 1.150v at 1366mhz so if you are power limited clocks/voltages can drop and could make memory unstable especially if you memory is overlocked. Keep that 10% power limit if that fixes your issue.
Yea it is fixed. I don't overclock and i didn't change anything only i put a +10% (max 30%) in power limit section of theese drivers.
It seems to affect only the Samsung memories that have more tight timings.
I had no problems installing the new WHQL driver, maybe something was wrong with the beta package?
I am also able to report some stability issues - even after updating to 1903 (which was my last hope before switching to a month-old driver or so).
Easy to replicate - Win10 x64 1903, K-Lite Mega codec pack (I don't want to discuss this choice - has worked for me for YEARS) and then MPC Black Edition + Bluesky Frame Rate Converter enabled, AMD Fluid Motion Video enabled and as Renderer - EVR custom presenter, with 16bit Floating Point surface format, PS3.0 Lanczos3/Lanczos resizer/downscaler.
Play a Video (any FHD+ will do) and use large skip and small skip several times in a row (I configured up/down arrows for large, left/right for small skip) -> BSOD.
Same when I was playing "They are Billions" with latest patches + fullscreen and alt-tabbing -> after a few seconds screen freeze and BSOD.
Monitor : Samsung LC49RG90 configured as single display (not PBP) + 120Hz and Freesync Ultimate Engine.
As I've said -- problems with latest drivers (19.8.1) but also with 19.7.5 (not sure about 19.7.1+ - 19.7.4).
Vega 64 LC Edition, no OC, Threadripper X1950 (no OC), 64GB RAM 3200 CL14 (rock-solid) etc.
I was a long time on W10 1803 + latest Security/cumulative patches and I thought that something borked it on the windoze side... that is why I went to 1903 + latest patches - to no avail. Still BSODS
Funny enough - Playing "They are billions" in the Frame, or watching movies in the frame doesn't result in BSODs. Only full-screen.
Also disabled f-lux completely thinking it might be related. It wasn't.
Are you sure? 50% is the limit on my card.
@PrEzi updated version of MPC-HC ? v1.8.7 ?
Im also using MPC-HC (I always update it - yes there are still updates)
And i have not encounter any weird problems...
1903 + latest Radeon drivers...
Maybe there is a bug with your card and MPC-HC only, try and use the K-Lite Mega codec pack 1.5.4
Yeap its 30 max i uploaded a photo.
Its a 4 phase card and the phases rated 50 aber max at 125 celsiou. Totally 200 aber.
At the moment i'm still using 19.5.2 driver version.
Do you suggest me install 19.8.1 on my rx 480 gtr ?
Yes, try it out.