1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

AMD Fury X Owners' Thread

Discussion in 'Videocards - AMD Radeon' started by Fox2232, Jun 25, 2015.

  1. tarot

    tarot Active Member

    Messages:
    65
    Likes Received:
    16
    GPU:
    XFX Vega 64
    ok my xfx fury x died.
    swapped cases between i cleaned it changed the thermal paste...done it a million times.
    started it up artifacts in bios then windows then gets worse then dead.
    computer won't start with it in and all leds are solid red.pull a power plug and compute starts but nothing on the card (fans and pump etc are working when powered)

    any ideas ...i have restriped it and checked the glass and not a blemish anywhere also went over the whole thing with a microscope now blemishes burns or knockoffs....i,m lost. and i,m using intel onboard video....pity me :)
     
  2. moaka

    moaka Master Guru

    Messages:
    275
    Likes Received:
    6
    GPU:
    GTX 1080 ti MSI GX
  3. PrMinisterGR

    PrMinisterGR Ancient Guru

    Messages:
    7,004
    Likes Received:
    136
    GPU:
    Sapphire 7970 Quadrobake
    Corrupt bios maybe? Tried switching to the secondary one?
     
  4. mR Yellow

    mR Yellow Ancient Guru

    Messages:
    1,935
    Likes Received:
    0
    GPU:
    Sapphire R9 Fury
    How did you OC HBM? I can't using AB with ReLive drivers.
     

  5. OnnA

    OnnA Ancient Guru

    Messages:
    8,944
    Likes Received:
    1,750
    GPU:
    Vega 64 XTX LiQuiD
    Maby try to Flash this one:

    BIOSES by Buildzoid

    -> http://cxzoid.blogspot.fr/2016/04/possibly-last-batch-of-custom-fiji-bios.html

    Try it with believe: it will work !
     
  6. Goiur

    Goiur Master Guru

    Messages:
    673
    Likes Received:
    101
    GPU:
    AMD RX Vega 56
    Sapphire Trixx works to OC hbm and core. AB is dead on ReLive.
     
  7. moaka

    moaka Master Guru

    Messages:
    275
    Likes Received:
    6
    GPU:
    GTX 1080 ti MSI GX
    With trixx :)

    16.12.1 stable on bf1 , rocket league , B&S atm .

    Firestrike : http://www.3dmark.com/fs/11019598
     
    Last edited: Dec 9, 2016
  8. moaka

    moaka Master Guru

    Messages:
    275
    Likes Received:
    6
    GPU:
    GTX 1080 ti MSI GX
  9. mR Yellow

    mR Yellow Ancient Guru

    Messages:
    1,935
    Likes Received:
    0
    GPU:
    Sapphire R9 Fury
  10. Goiur

    Goiur Master Guru

    Messages:
    673
    Likes Received:
    101
    GPU:
    AMD RX Vega 56
    Never OCed my FuryX using higher Voltage, is it possible to do it without throtling using AB/Trixx/*** ? Is bios modding a must ??
     

  11. mR Yellow

    mR Yellow Ancient Guru

    Messages:
    1,935
    Likes Received:
    0
    GPU:
    Sapphire R9 Fury
    I think with the new ReLive drivers is does offer some sort voltage control.
    But no, in general you need AB/TRIXX to change volts.

    AFK a modded bios is not a must.
     
  12. moaka

    moaka Master Guru

    Messages:
    275
    Likes Received:
    6
    GPU:
    GTX 1080 ti MSI GX
    [​IMG]

    Buildzoid said :

    IT's 1.3V VID so it doesn't actually run at 1.3V it "tries to" mine is : 1.27~1.28V ( +18 mv )

    I using this bios since september without any problems , max temp 51-52°( fans 60% ).

    With this bios i can play with 1120/545 without edit the voltage but i have +12mv to be safe ..

    Bios for all fury ( x ) cards : http://cxzoid.blogspot.fr/2016/04/possibly-last-batch-of-custom-fiji-bios.html
     
    Last edited: Dec 10, 2016
  13. moaka

    moaka Master Guru

    Messages:
    275
    Likes Received:
    6
    GPU:
    GTX 1080 ti MSI GX

    HWbot :

    http://hwbot.org/submission/3389497_moakah_3dmark___fire_strike_radeon_r9_fury_15205_marks ( tess off like BZD hwbot rules )

    In fury League i have the best gpu score , Buildzoid have better overall ( 3960x 5.0 ghz )
     
    Last edited: Dec 10, 2016
  14. moaka

    moaka Master Guru

    Messages:
    275
    Likes Received:
    6
    GPU:
    GTX 1080 ti MSI GX
  15. gupsterg

    gupsterg Member Guru

    Messages:
    177
    Likes Received:
    1
    GPU:
    RX VEGA 64
    Use MSI AB v4.3.0.

    i) For GPU core voltage control enable "Unlock voltage control" in settings "General" tab (you can leave selection box on standard MSI).

    ii) For HBM overclocking select "Extend official overclocking limits".

    Not a must bios mod. Firstly check "Power Efficiency" is not on in driver control panel, Gaming > Global settings. Next make sure temps of GPU / VRM are not at throttling levels, default GPU throttle limit is 75C and VRM 105C. HWiNFO gives you VRM temps but only on v16.11.5 or below, Martin Malik author of HWiNFO has highlighted to AMD issue with ReLive hopefully driver will be fixed. Then run something like 3DM FS to see if card throttles, adjust PowerLimit if required, if still an issue post for help, happy to help a fellow Fiji owner :D .

    ReLive has WattMan. It can adjust GPU clock/voltage per DPM, which MSI AB or TriXX can not. MSI AB or TriXX applies a VDDC offset through IR3567B which manipulates all DPMs VDDC. WattMan allows you to increase say highest state of GPU (DPM 7) and keep lower DPMs at stock, which we don't OC.

    The ROM sets VID, what you see in monitoring is VDDC. Due to LLC and other factors VDDC will be lower than VID. Also be aware how PowerTune works. Even when card is in same DPM state (ie highest = DPM 7) differing apps will show differing VDDC. GPU-Z render test shows non fluctuating VDDC but this will differ to 3DM FS, etc.

    More such information can be found in OP/thread of Fiji bios mod on OCN :D .
     
    Last edited: Dec 12, 2016

  16. mR Yellow

    mR Yellow Ancient Guru

    Messages:
    1,935
    Likes Received:
    0
    GPU:
    Sapphire R9 Fury
    Thanks for the insight. I know how to OC Fiji with AB. For me your suggestions don't work with HBM. I have to OC in unofficial mode.

    I've also always disabled Power Saving in Crimson.

    What interest me about your post is your Wattman explanation.
    What would you say is the best app to OC Fiji? Just wattman? Never liked the idea of combining two OC apps.
     
  17. OnnA

    OnnA Ancient Guru

    Messages:
    8,944
    Likes Received:
    1,750
    GPU:
    Vega 64 XTX LiQuiD
    Some Testing with ReLivE Driver :)

    IMO The Best Driver to date !

    Two scores in 3D Mark (Yes i know but i like 3Dmark since the begining ;) )
    I like to meansure scores in similar OC (GPU as well as CPU/NB) to determine if it's better than the last one.

    CPU was set to my STD 4.01GHz / NB 2.7GHz / HT 2.5GHz / DDR3 2000MHz CL9 1T

    Here:
    OC -> 1120/570 tMOD+vMod HBM GPU=1.212v and HBM=1.337v +12%Pow
    [​IMG]
    Hi Gamer -> 1050/570 1.212v/1.337v -42mV & +8%POW
    [​IMG]

    [​IMG]
    And tW for DeusEx MkD DX12 1920:1440 Ultra/High CHS=On, no-Blurrr
    950/570 -42mV -14%Pow
    [​IMG]
     
    Last edited: Dec 13, 2016
  18. moaka

    moaka Master Guru

    Messages:
    275
    Likes Received:
    6
    GPU:
    GTX 1080 ti MSI GX
    Just 1 question , your card is really unlocked to 4096 sp ? Tmod ( u said me + 500-600 pts in 3dmark ) , my card doing better with lower oc lower sharders and no Tmod , unlocked fury 4096sp no Tmod (@1050/570 ) hit 17k ...Your Tmod seems useless

    1100/570 : http://www.3dmark.com/3dm/16650757?
    [​IMG]
     
  19. mR Yellow

    mR Yellow Ancient Guru

    Messages:
    1,935
    Likes Received:
    0
    GPU:
    Sapphire R9 Fury
    His CPU is holding him back BIG time.
     
  20. Undying

    Undying Ancient Guru

    Messages:
    11,414
    Likes Received:
    1,233
    GPU:
    Aorus RX580 XTR 8GB
    Are you serius? Dont you see hes using PII CPU paired with Fury X?
     

Share This Page