1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

AMD Fury X Owners' Thread

Discussion in 'Videocards - AMD Radeon' started by Fox2232, Jun 25, 2015.

  1. Only Intruder

    Only Intruder Maha Guru

    Messages:
    1,109
    Likes Received:
    141
    GPU:
    Sapphire Fury Nitro
    I thought the bios switch on modern sapphire cards was to switch from UEFI support to legacy BIOS support? So one can boot natively in UEFI where as the other on a modern UEFI board would need CSM mode.

    I do know that you can't flash a UEFI native bios because it requires a security signature.

    Imo if you're going to tinker with the bios on a sapphire card, do it on the non-UEFI bios.
     
  2. z8373767

    z8373767 Member Guru

    Messages:
    176
    Likes Received:
    50
    GPU:
    Fury Nitro 1070/600
    My Fury don't like OC. Everything above stock 1050/500 generate crash while gaming (Quantum Break, Battlefield 1).
    I didn't flash any bios, because i can't choose good one for me. Almost every bios by Onna have CU Unlock and Timing mod. Im no sure to use this, because this broken OC.
     
  3. pedromr2

    pedromr2 Member

    Messages:
    45
    Likes Received:
    0
    GPU:
    R9 Fury Nitro OC+
    I have a BIOS from onna and the best i could achive was 1080/500,the thing i noticed with the bios flash was the temps going down alot i game at 50/60 max,that is incredble for the card in question when i mean gaming is like BF1 for exemple at 1440p everything maxed out i play over 60fps.
     
  4. moaka

    moaka Master Guru

    Messages:
    275
    Likes Received:
    6
    GPU:
    GTX 1080 ti MSI GX
    Try Buildzoid bios : HERE

    Best for my Tri x can achieve 1120/540 stable in game ( 52 ° max temp fan 50% )
     
    Last edited: Nov 28, 2016

  5. PrMinisterGR

    PrMinisterGR Ancient Guru

    Messages:
    7,004
    Likes Received:
    137
    GPU:
    Sapphire 7970 Quadrobake
    These temps are insane.
     
  6. pedromr2

    pedromr2 Member

    Messages:
    45
    Likes Received:
    0
    GPU:
    R9 Fury Nitro OC+
    Yep i know i didnt believe i had to see them to believe :)
     
  7. OnnA

    OnnA Ancient Guru

    Messages:
    9,463
    Likes Received:
    1,927
    GPU:
    Vega 64 XTX LiQuiD
    Yup, i got low Temps also :)

    Now we need to make them with tMOD + HBM Vmod and im Ready to test this one :)
     
  8. moaka

    moaka Master Guru

    Messages:
    275
    Likes Received:
    6
    GPU:
    GTX 1080 ti MSI GX
    Really ? i tested with fans 60% and never past 50 ° ( in bf1 gpu usage 100% ) , i think HAF 932 is really good with the 24mm in front of the graphic card and mobo .


    Here you can see it . https://www.youtube.com/watch?v=uzjQrXJIJCs , old video with the temps . Today the game run perfectly fine with a 100% gpu usage without any drops .
     
    Last edited: Nov 29, 2016
  9. pedromr2

    pedromr2 Member

    Messages:
    45
    Likes Received:
    0
    GPU:
    R9 Fury Nitro OC+
    Onna i will wait for that new BIOS then :)
     
  10. PrMinisterGR

    PrMinisterGR Ancient Guru

    Messages:
    7,004
    Likes Received:
    137
    GPU:
    Sapphire 7970 Quadrobake
    I mean that they are very good.
     

  11. Only Intruder

    Only Intruder Maha Guru

    Messages:
    1,109
    Likes Received:
    141
    GPU:
    Sapphire Fury Nitro
    I wish I had good results with Onna's bios edits, for me I get horrible clock throttling/power limitation resulting in poor performance :/
     
  12. moaka

    moaka Master Guru

    Messages:
    275
    Likes Received:
    6
    GPU:
    GTX 1080 ti MSI GX
  13. PrMinisterGR

    PrMinisterGR Ancient Guru

    Messages:
    7,004
    Likes Received:
    137
    GPU:
    Sapphire 7970 Quadrobake
    That's amazing price/performance actually. Pity they don't deliver in the EU.
     
  14. OnnA

    OnnA Ancient Guru

    Messages:
    9,463
    Likes Received:
    1,927
    GPU:
    Vega 64 XTX LiQuiD
  15. mR Yellow

    mR Yellow Ancient Guru

    Messages:
    1,935
    Likes Received:
    0
    GPU:
    Sapphire R9 Fury
    Make sure you've disabled power saving in AMD crimson control panel.
    Also install Clock Blocker.
     

  16. OnnA

    OnnA Ancient Guru

    Messages:
    9,463
    Likes Received:
    1,927
    GPU:
    Vega 64 XTX LiQuiD
    Hmm You can always adjust this by Yourself (or i can make it ;) )

    Give in Fiji BIOS Tool:

    TDP (tW) = 280 or 300
    TDC (A) = 260-280
    MPDL (tW) = 260-280

    And in the Power Play Tab give last v to 1.218v or even 1 step more to 1.225v.

    Then Try -> I've Flashed this one in Summer and everything is OK
    Temps are really low, and OC Headroom is Great (1.212v Base in BIOS)

    I can Play Games at 1120/570 0mV and +12% POW ~47-52 deg.cels.
    Default Max i have on 1050/570 -42mV -14%POW (~217-250tW Yeah the 217tW is in Forza Horizon DX12 at Ultra)

    Becouse i don't need so much Powah ;) im Playing Games mostly at 935-950 and 550-570HBM (tW at 160-220 depends on Game)
     
    Last edited: Nov 30, 2016
  17. z8373767

    z8373767 Member Guru

    Messages:
    176
    Likes Received:
    50
    GPU:
    Fury Nitro 1070/600
    I found solution for my crashes, even on stock clocks. It's my low, budget PSU :bang: My friend borrow me Corsair VS 650W. Crashes stop.
    Tommorow i will get XFX TS 750W Gold Single Rail :banana: I will write more soon.
     
  18. OnnA

    OnnA Ancient Guru

    Messages:
    9,463
    Likes Received:
    1,927
    GPU:
    Vega 64 XTX LiQuiD
    lol :banana:

    GPU needs FOOD :flip2:
     
  19. mR Yellow

    mR Yellow Ancient Guru

    Messages:
    1,935
    Likes Received:
    0
    GPU:
    Sapphire R9 Fury
    /SLAP

    Shame on you :p
     
  20. z8373767

    z8373767 Member Guru

    Messages:
    176
    Likes Received:
    50
    GPU:
    Fury Nitro 1070/600
    OC back to the game. First results 1080/545. I didn't flash bios, because i can't :) When i flashing secondary bios i have ERROR 0FL01. I used to Ati Win Flash. You have another method to do this?
     

Share This Page