AMD Catalyst 14.6 RC2 (14.200.1004.0 June 20)

Discussion in 'Videocards - AMD Radeon Drivers Section' started by asder00, Jun 24, 2014.

Tags:
  1. DiceAir

    DiceAir Maha Guru

    Messages:
    1,351
    Likes Received:
    14
    GPU:
    Galax 980 ti HOF
    Will try these when i get my crossfire running. Just waiting for 4790K to become available here
     
  2. Rich_Guy

    Rich_Guy Ancient Guru

    Messages:
    12,373
    Likes Received:
    489
    GPU:
    MSI 2070S X-Trio
    The 14.6 Beta 1s have been fine for me, got a couple of frames increase, and had no issues. :)

    Just re-ran Sniper V2 again back on the Beta 1s, minimums gone back up to normal, 40 odd.

    Thought they were a bit low on the minimums, as i also noticed while running the LL bench, on some parts i was dropping as low as 45/50, where as on the Beta 1s, was only going around 70/72, same parts.
     
    Last edited: Jun 24, 2014
  3. Gizmo

    Gizmo Member Guru

    Messages:
    138
    Likes Received:
    0
    GPU:
    .
    Thanks for the feedback guys...looks like yet another lame 14.x set think i'll be sticking with 13.12 till Nv release there 8x0 cards and i can move back to the green team
     
  4. Extraordinary

    Extraordinary Ancient Guru

    Messages:
    19,463
    Likes Received:
    1,516
    GPU:
    GTX980 SLI
    It's the Eyefinity changes that broke everything for me, I run Eyefinity 24/7 now and it's unusable with 14.6, they broke everything about it, mainly Win key & P to swap between single and multi screen doesn't work any more

    Along with a list as long as my arm of other problems, and 0 performance improvements for WDs, actually -20% in watchdogs, I get way better fps with 14.4

    I hated my machine while I was using 14.6, it's great again with 14.4
     

  5. BrainDedd

    BrainDedd Member Guru

    Messages:
    198
    Likes Received:
    6
    GPU:
    ASUS Strix 1070 OC
    Knock on wood ... but these do seem to have fixed the black screen video options dialog.
     
  6. Rich_Guy

    Rich_Guy Ancient Guru

    Messages:
    12,373
    Likes Received:
    489
    GPU:
    MSI 2070S X-Trio
    Ahh, i don't run Eyefinity. :p

    Minimums are dire on these though for some reason, so will wait for the 14.7s, or whatever ones are next, as these are RCs, the only update they'll get is a certificate to go WHQL. :D
     
  7. Espionage724

    Espionage724 Guest

    I had Eyefinity setup for about a week, and it worked fine on 14.6; even GW2 still had proper Eyefinity detection. Was able to switch back and forth without any real issue either (just went to CCC to re-enable and disable Eyefinity manually; no Preset hotkeys since I still can't manage to get em working...)
     
    Last edited by a moderator: Jun 24, 2014
  8. Extraordinary

    Extraordinary Ancient Guru

    Messages:
    19,463
    Likes Received:
    1,516
    GPU:
    GTX980 SLI
    Yea switching between from CCC works, but profiles only work about once, then you have to do it manually again each time, set up bezel correction each time and it's a PITA compared to hitting Win&P a couple times

    Works fine with 14.4

    Anyway there was no benefits with 14.6 over 14.4, and many negatives, so no reason to keep them for me
     
  9. The Mac

    The Mac Ancient Guru

    Messages:
    4,408
    Likes Received:
    0
    GPU:
    Sapphire R9-290 Vapor-X
    Have they fixed the damn monitor disconnect bug thats been tooling around since 14.1?
     
  10. Extraordinary

    Extraordinary Ancient Guru

    Messages:
    19,463
    Likes Received:
    1,516
    GPU:
    GTX980 SLI
    Never had that bug
     

  11. The Mac

    The Mac Ancient Guru

    Messages:
    4,408
    Likes Received:
    0
    GPU:
    Sapphire R9-290 Vapor-X
    lots of others have
     
  12. Ltmatt

    Ltmatt Member Guru

    Messages:
    118
    Likes Received:
    0
    GPU:
    HIS Ice-Q 7950 Crossfire
    Is this just the same as the APU driver but WHQL version?
     
  13. The Mac

    The Mac Ancient Guru

    Messages:
    4,408
    Likes Received:
    0
    GPU:
    Sapphire R9-290 Vapor-X
    i think the APU version was june 2
     
  14. montafede

    montafede New Member

    Messages:
    8
    Likes Received:
    0
    GPU:
    ati 7970 dual-x
    this drivers are good for hd 7970 dual-x ?
    please answer to me
     
  15. Lane

    Lane Ancient Guru

    Messages:
    6,361
    Likes Received:
    3
    GPU:
    2x HD7970 - EK Waterblock
    But can you explain what do this bug ? the monitor disconnect ?

    I ask, because with some Displayport monitors, if i power off the monitor, the gpu send me back a message that the monitor have been disconnected ( check the cable etc ), but not with HDMI.. but it is seems more linked to DP than anything.
     

  16. KBDE

    KBDE Master Guru

    Messages:
    215
    Likes Received:
    25
    GPU:
    ROG STRIX 2080 Ti
    New driver to test. Nice. :)

    Still errors though in State of Decay, Spintires and others. Will go back to 14.4 later, but wil test them first anyway.
     
  17. exfire

    exfire New Member

    Messages:
    8
    Likes Received:
    0
    GPU:
    R9 290
    I do not see updates for R9 290

    ;/
     
  18. thatguy91

    thatguy91 Ancient Guru

    Messages:
    6,648
    Likes Received:
    98
    GPU:
    XFX RX 480 RS 4 GB
    I was wondering how soon they'll release an all in one again (desktop, laptop, APU).
     
  19. montafede

    montafede New Member

    Messages:
    8
    Likes Received:
    0
    GPU:
    ati 7970 dual-x


    tank u so much
     
  20. The Mac

    The Mac Ancient Guru

    Messages:
    4,408
    Likes Received:
    0
    GPU:
    Sapphire R9-290 Vapor-X
    if the monitor goes into powersave, or you turn it off, it uninstalls itself.

    when you turn in on, or comes back from power save, it reinstalls.

    like what happens when you unplug/plug a USB device.

    it disabled the virtual desktop, and screws with eyefinity.

    happens on DP and HDMI, not sure about DVI.
     

Share This Page