Discussion in 'Videocards - AMD Radeon Drivers Section' started by asder00, Jan 17, 2013.
I get Access Violation exception with 13.1 in STALKER CoP each time when launching the game.
Anyone else have a similar problem?
Anyone have any ideas on what the issue of the downsampling might be?
Even better... what the tool does and if it can be done manually?
AMD Chipset drivers.
The link for the mobility driver is inside that tool, don't know anything about that error message i just update the mobility link for every release, it's been months since i took a peek inside the mobility tool maybe it changed...
Anyway, go ahead and install the mobility driver should be all good.
Everything installed. Had the hardware error but its all installed and after reboot it working fine. GW2 is running smooth on my 6950 xfire setup
It looks like you replaced the mobility links with the standard download links. What happened? I have the actual mobility link that came from your post before it was edited.
In your original post, did you get the supported cards from within each driver, meaning none of the mobile drivers are supported through the main download link (besides 6300M which is listed in the first set)?
Links are replaced by Hilbert to point the Guru3D download page; in there you scroll down to download locations and choose your version, the mobility driver is there you can't miss it. Download AMD Catalyst Mobility 13.1 Win 8 | Win 7 | Vista (64-bit) [ 595 downloads ]
The desktop supported list is taken from the desktop driver, the mobility list is taken from the mobility driver.
Thanks, I appreciate the help! I will install the mobility version then.
asder00, my hero..
Thanks for the link to the mobility version, but i am getting blue screens before drivers can finish installing. I am running windows 8 x64, and have a pair of hd 5870m's running crossfire. It seems that anything newer than 12.11 beta 8 will give me a blue screen right when the installer is about to finish. Is anyone else with 5870m's having issues getting drivers after 12.11 beta 8 to install properly?
you did not link the Windows XP drivers.
They are on the site. they have 13.1 drivers for XP.
i dont know what they fixed.
Thanks for that. I'll be giving 13.2b a bash, but interesting to know that there's really been no improvement in drivers for 5xxx since then
WHQL drivers - right. First driver package that has given me install errors in forever and I'm just using a single 6870.
Confirmed no video on HD5870 with MPC-HC and floating point processing with these.
Drivers seem to working fine for me on my 5870. No issues so far.
Downclocking issue for me. GPU memory does not going to 2D mode. It is always in 3D performance. :/
Just got the new fancy Win8 BSOD with a "driver power state failure" after installing this 13.1 driver. If it pops up again I guess I'll have to use 12.11b11 until the official 13.2b arrives.
HDMI install issue
Had the installation error with the 13.1 release, tried the leaked 13.2 beta and it succeeded. Checked the logs; the 13.1 HDMI driver is 18.104.22.16809 while the 13.2b is 22.214.171.12408.
So if i am the only one who has problems with 2D cloks on the 13.1 WHQL? Memory clock stays at 3D mode. :/ It means highe idle temp. On 12.10 27C and on 13.1 I have 34C. :/