AMD Catalyst 12.11 (9.010.8 November 15) AMD Official BETA 11

Discussion in 'Videocards - AMD Radeon Drivers Section' started by asder00, Oct 22, 2012.

Tags:
Thread Status:
Not open for further replies.
  1. NiColaoS

    NiColaoS Master Guru

    Messages:
    628
    Likes Received:
    43
    GPU:
    GTX 1660 SUPER
    Damn it, on BF3 the boost is real... It's almost like when I had my card overclocked at 1050Mhz ( 900 default ).

    I'm playing Caspian full Ultra, 1080p and just a few times it goes below 50FPS, while it was happening very often before.

    This means... Ultra with 2xMSAA you should be playing FINE! At least on vanilla maps.
     
    Last edited: Oct 22, 2012
  2. blacblu

    blacblu Guest

    Should I even bother install these with my ****y cards?
     
  3. Joe

    Joe Active Member

    Messages:
    83
    Likes Received:
    0
    GPU:
    Galax GTX 970 @ 1400/3900
    arghhhhh loveing the performance BUT one thing bothering me my clock speeds are all over while idle.

    core can go 300/450/1050
    memory stuck at 1200

    suppose i can live with memory being at 1200 for now at least core downclocks to 300..

    would be nice to have cool memory during the night though : / pc is on 24/7 might just down clock it manually before bed to 150 : )
     
    Last edited: Oct 22, 2012
  4. psyside

    psyside Master Guru

    Messages:
    351
    Likes Received:
    0
    GPU:
    7950 @1150/6000
    Is there any new CAP? and please someone answer, if you got 79xx do you still need to install the hotfix driver or the previous is fine ?
     

  5. jud666

    jud666 New Member

    Messages:
    6
    Likes Received:
    0
    GPU:
    Sapphire hd7850 2gb
    No noticeable improvements for me at all, but I think my CPU is a real bottleneck.
     
  6. scorpscarx

    scorpscarx Member

    Messages:
    38
    Likes Received:
    0
    GPU:
    1
    Reposting this from the other 12.11 beta thread because I just installed this.

    Much improved performance in Chivalry Medieval Warfare, but with Afterburner and a slight OC, it's forcing constant voltage and my memory clock isn't scaling down either, slightly higher temps as well.

    Any hope for a fix for this?
     
  7. Derko1

    Derko1 Master Guru

    Messages:
    408
    Likes Received:
    0
    GPU:
    2x1080s
    I gained over 800 points in 3DMarks 11 and the issues I was having cleared away after a reboot and setting my own idle clocks. :nerd:
     
  8. Ltmatt

    Ltmatt Member Guru

    Messages:
    118
    Likes Received:
    0
    GPU:
    HIS Ice-Q 7950 Crossfire
    Let me guess, you have a reference 7970?

    I have the same problem, only seems to affect reference 7970 users, non reference users are ok.
     
  9. scorpscarx

    scorpscarx Member

    Messages:
    38
    Likes Received:
    0
    GPU:
    1
    Reference 6970, maybe an afterburner fix will roll out.
     
    Last edited: Oct 22, 2012
  10. Chrisoldinho

    Chrisoldinho Member

    Messages:
    28
    Likes Received:
    0
    GPU:
    CF HIS 7950 IceQ's
    CF 7950 user here (1200 / 1375 @ 1.2), running 5960x1080 on BF3 (bezel compensation enabled).

    Settings are textures Ultra, everything else on high, motion blur on, post AA high, 2x msaa. I am using Radeon Pro (awesome) DFC to lock at 60 fps, setting vsync always on and tripple buffering on (these 2 are in game enabled anyway). Finally using danoc 1.3 FXAA injector.

    I was getting typically 55 fps, with dips to 45 fps in places.
    New drivers, nearly always 60 fps, with occasional dips to low 50's.
    Overall very impressed.

    My CPU is holding me back I know (1090T @ 4.0 / CPU/NB @ 3000), just praying that the Vishera results released after the NDA is up tomorrow is positive, then I can switch away from my 1090T, sorry for going O/T!

    Chris.
     

  11. Sc4rL3T

    Sc4rL3T Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    R9 290
    Hi all (sorry for my bad english), just want to report huge performance loss in games like Borderlands 2 / COD black ops (black ops droppin from ~200fps to ~85fps with stutter), same thing with 12.9 beta, no problem with 12.8 official, really hope it will be solved with official version.
     
  12. boofeyblitz

    boofeyblitz New Member

    Messages:
    8
    Likes Received:
    0
    Corrupted Screen After Install

    So after I install the 12.10 or the 12.11 I get a corrupted purple screen, with lines going everywhere. Does anyone know what is causing this issue? I have never ran into this before. I did a fresh install of Win 7 and still got the issue. I am running a 5870 on Win 7 Ult. Thank you for any help.
     
  13. Kaktus

    Kaktus Master Guru

    Messages:
    309
    Likes Received:
    0
    GPU:
    Gigabyte 785O OC 2GB
    Went from the 12.8 drivers to these ones and i get 780 more points in 3dmark 11. :nerd:
     
  14. PNeV

    PNeV Ancient Guru

    Messages:
    2,069
    Likes Received:
    1
    GPU:
    MSI GTX 1070 Armor
    Last edited: Oct 23, 2012
  15. Ourasi

    Ourasi Master Guru

    Messages:
    294
    Likes Received:
    7
    GPU:
    MSI RX 480 Gaming X 8GB
    No issues like that here, drops down to 300/150@0.848v idle, vanilla HD7970 with GHZ-Ed. bios..
     

  16. Xzibit

    Xzibit Banned

    Messages:
    4,383
    Likes Received:
    0
    GPU:
    7970 Windforce
  17. ClockClocker

    ClockClocker Master Guru

    Messages:
    414
    Likes Received:
    1
    GPU:
    970 gtx
    this driver makes my vram frequency stuck at 1200mhz.
     
  18. Sc4rL3T

    Sc4rL3T Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    R9 290
    12.11 beta uninstalled (driver sweeper, Ccleaner etc), 12.10 official installed, same thing, performance drops, 12.10 uninstalled, 12.8 installed = perfect performance in all games, those drivers are a "no go" for me, gettin tired of this "get the new HD7xxx, cause we don't support older ones!" F*CK THIS!
     
  19. Rich_Guy

    Rich_Guy Ancient Guru

    Messages:
    12,578
    Likes Received:
    600
    GPU:
    MSI 2070S X-Trio
    Well popped my 7970 back in as wanted to try these, so did some benchmarking, first i popped the 12.9 BETA's on and ran benchies, then popped these 12.11 BETA's on, and ran again.

    There was an improvement, under the 12.9 BETA's in 3D11, i got 8062, gfx score was 9 thousand odd, under the 12.11 BETA's, score went to 8711, and the gfx score went to over 10,300.

    Heaven under 12.9 BETA's was about 89.9fps, 12.11 BETA's was around 92 odd.

    Tested for this clock problem (as got a ref 7970 which is supposed to have the prob), and the clocks are fine, no problems at all, idles at 300/150, when watching flash vids in FF, goes to the usual 501 core (forgot what the memory went to, but i think it was 1375), then when stopped, back to 300/150, my 7970 is clocked at 1070/1500 btw.

    Tested a few games, all run fine, except Stalker call of Pripyat, its broken under these 12.11 BETA's, when its finished loading the game, instead of getting Press 'Key to Start', it just goes back to the desktop, with the xray engine has stopped working, checking for solution guff, but under the 12.9 BETA's, it loaded fine, so don't know whats up with that, even Stalker SOC worked fine (which also uses the xray engine).

    Havn't had any full screen crashes with 100% fan yet, which i was getting with the 12.6/12.7 BETA's (although only been back running the 7970 for about 2 and a half hrs), so will leave it in and see how it goes. :)
     
    Last edited: Oct 23, 2012
  20. V1tol

    V1tol Master Guru

    Messages:
    284
    Likes Received:
    0
    GPU:
    MSI 1070 Gaming X
    This was the first driver, which gaved me massive flickering, dissapearing objects and screen corruption in games :wanker:. If you get any issues with this driver, my advice to you: wipe out old driver with driver sweeper\driver fusion before installing this one. It was the first time I decided not to clean out old drivers and got screen corruption in 3D :bang:. But clean install fixed everything :banana:
     
Thread Status:
Not open for further replies.

Share This Page