AMD Catalyst 11.11 WHQL (8.911.0 October 25) - Download & Discussion

Discussion in 'Videocards - AMD Radeon Drivers Section' started by asder00, Nov 15, 2011.

Tags:
  1. undercoverb0ss

    undercoverb0ss Member

    Messages:
    22
    Likes Received:
    0
    GPU:
    GTX 690
    If you are not even using this driver then why are you posting this?
     
  2. Amaze

    Amaze Ancient Guru

    Messages:
    3,899
    Likes Received:
    1,067
    GPU:
    1070ti 2126/4350
    On a single card??
     
  3. ASLayerAODsk

    ASLayerAODsk Master Guru

    Messages:
    773
    Likes Received:
    1
    GPU:
    MSI 580 8G

    on a single card.

    but i also spend 4-5 hours tweaking my OS so it runs optimally for software too..reg settings...tons of them...lots can be found around the web...Id say this time...even with my SSD-OS drive...I got an additional 30% extra performance...guess the SP1 made a diff...

    I think the only thing that id mention as not totally 'perfect' in skyrim is the shadows...they seem a bit 'off' sometimes...but they adjust perfectly...with the sun/lightsource...its just that they are really...blocky...even at Ultra...guess the were trying to do soft-shadows @ dx9? its sad that anyone would release something that old...what..5 years now *dx9*?
     
    Last edited: Nov 15, 2011
  4. streakpt

    streakpt Master Guru

    Messages:
    277
    Likes Received:
    0
    GPU:
    Sapphire 290 Crossfire
    Mine works fine, super fluid.
     

  5. COOPOD

    COOPOD Active Member

    Messages:
    55
    Likes Received:
    0
    GPU:
    HIS HD7970 IceQ X 3GB
    No L.A. Noire, no Skyrim, no NFSTR optimization!!!!!BAD DRIVER!
     
  6. dox_aus

    dox_aus Master Guru

    Messages:
    301
    Likes Received:
    0
    GPU:
    MSi 290 Gaming CF
    BF3 performance seems ok, but still suffers from MASSIVE fps loss when dust and smoke effects are on screen, like flying low in a chopper and seeing ur dust kick up or thru tank scopes etc
     
  7. rab3072

    rab3072 Active Member

    Messages:
    80
    Likes Received:
    2
    GPU:
    Radeon HD 5750
    not to mention the green flicker i still get. still there with this driver.
     
  8. spyre

    spyre Master Guru

    Messages:
    227
    Likes Received:
    0
    GPU:
    AMD 6990 and 6970 TF
    LA Noire is locked at 30fps so nothing needs doing same for NFSTR, Skyrim has Crossfire support in the 11.11 CAP 1. So know what you are talking about next time.
     
  9. blacblu

    blacblu Guest

    Can I use 11.11 + 11.9 CAP4?
     
  10. apsve

    apsve New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    2x ATI Radeon HD 5770s
    Wow, that worked like a charm, thanks! I went from ~25-35 outside to a solid 45-60 with Xfire.
     

  11. Rich_Guy

    Rich_Guy Ancient Guru

    Messages:
    12,572
    Likes Received:
    598
    GPU:
    MSI 2070S X-Trio
    Glad it helped, and welcome aboard apsve :)
     
  12. AbjectBlitz

    AbjectBlitz Ancient Guru

    Messages:
    3,462
    Likes Received:
    2
    GPU:
    R390 1200/1720
    That would be awesome, long overdue we get a multithreaded driver especially now that BF3 is supposedly programmed to take advantage. I think Spyre on Rage3d forums said we should get one around or before December so cant be long now.
     
  13. painter

    painter Maha Guru

    Messages:
    1,051
    Likes Received:
    0
    GPU:
    KFA2 670 2GB
    Replicated my Skyrim crash with these, it would lock then go through the 'Skyrim has stopped responding - Window is looking for a solution' thing, whenever I crossed the bridge to the S.E of Whiterun... retuning to the 11.10's allows me to cross the bridge once again.

    Performance was also slower in Skyrim with the 11.11's... oh well, hope the next set are better.
     
    Last edited: Nov 15, 2011
  14. Yoshpop

    Yoshpop Member Guru

    Messages:
    106
    Likes Received:
    0
    GPU:
    1080 SLI 2.05GHz
    What combo are you using then? I ask because I'm always interested in making this game run better. I'm rolling with 11.10 v3 + 11.9 CAP4 and performance is great except for the occasional stutter.

    I plan on testing these with the new 11.11 CAPs once I get home from work and will update with my results.

    EDIT: I'm referencing BF3 for anyone wanting context
     
  15. shinzamiel

    shinzamiel New Member

    Messages:
    2
    Likes Received:
    0
    GPU:
    MSI R5750-MD1G
    after using driver sweeper and updating to 11.11 i still get bsod and random freez on my 5750 and am just sad (when playin bf3)
     
    Last edited: Nov 15, 2011

  16. xfrgtr

    xfrgtr Member

    Messages:
    49
    Likes Received:
    1
    GPU:
    1080 gtx
    lol
    Skyrim has NO Crossfire support in the 11.11 CAP 1
     
  17. Evele

    Evele Member

    Messages:
    41
    Likes Received:
    0
    GPU:
    Sapphire 5700 XT
    What a bummer.
     
  18. Dalton Sleeper

    Dalton Sleeper Member Guru

    Messages:
    116
    Likes Received:
    0
    GPU:
    2 x GTX 1080 8GB
    Well, having CF support isn't necessarily a good thing then, is it?
    I guess by support you mean "solved negative scaling by disabling CF" or something because most people get better fps by using radeon pro or by renaming exe to Fallout3. I get atleast 10-15 fps more by renaming or loading oblivion profile than without.

    Lets hope that a new skyrim profile will be out soon...
     
  19. Matas

    Matas Member Guru

    Messages:
    151
    Likes Received:
    0
    GPU:
    Club3D 6950 2GB@990/6300
    Are you guys installing application profiles which came with 11.11 WHQL?
     
  20. John Dolan

    John Dolan Ancient Guru

    Messages:
    2,247
    Likes Received:
    0
    GPU:
    2x GTX 780 SLI
    6990 + 6970

    11.11 with the cap

    Skyrim
    gpu1 99%
    gpu2 99%
    gpu3 94%
     

Share This Page