AMD Catalyst 11.10 Preview2 [BF3 & RAGE Driver] (8.901.2 October 6)

Discussion in 'Videocards - AMD Radeon Drivers Section' started by asder00, Oct 7, 2011.

Tags:
  1. Ppzek

    Ppzek Member

    Messages:
    34
    Likes Received:
    0
    GPU:
    MSI 6870

    Samething for me, back to 11.5, added the gl driver to Rage folder and BF3 works just fine, eventhough an errors shows up before the game.
     
  2. Pill Monster

    Pill Monster Banned

    Messages:
    25,216
    Likes Received:
    7
    GPU:
    7950 Vapor-X 1100/1500
    Well that test is a bit misleading because it was run at 1920x1200 res, and at that high resolution the CPU has very little impact.
    If they really wanted to see how different CPU's perform the test should have been run at 1280x1024 or at least 1600x1200.

    My CPU is a dual core, but it's overclocked to 3.8Ghz and even at that speed both cores have a 98% load, (1600x1200 res ).

    Anyway those are just my observations......it's up to you in the end... :)
     
    Last edited: Oct 9, 2011
  3. Campacci2k

    Campacci2k Active Member

    Messages:
    99
    Likes Received:
    0
    GPU:
    R9 280X 3 GB
    Too bad that. In the last moment, try to do this .. It's that I liked this new driver. Thx.

    AMD, fix soon! hahahaha
     
  4. COOPOD

    COOPOD Active Member

    Messages:
    55
    Likes Received:
    0
    GPU:
    HIS HD7970 IceQ X 3GB
    Do you have promlem, Like this, with your Logitech G19 Gaming Keyboard?
    [​IMG]
     

  5. Scout

    Scout Member Guru

    Messages:
    166
    Likes Received:
    0
    GPU:
    2 x GTX 980Ti
    what's up with the flickering ? happens both in rage and bf3 beta..

    amd starting to piss me off
     
  6. BuBBle.D

    BuBBle.D Member

    Messages:
    31
    Likes Received:
    0
    GPU:
    Gigabyte GTX980Ti G1
  7. alphaproxima

    alphaproxima Active Member

    Messages:
    71
    Likes Received:
    0
    GPU:
    ATI 5850 @1040/1200
    I got my tearing problems solved by putting vsync always on.Obviously it didnt want to turn on on any other setting in the CCC. The cfg made no difference...
    Btw the frames are insane, I dont understand how come some ppl have problems...
     
  8. k1net1cs

    k1net1cs Ancient Guru

    Messages:
    3,783
    Likes Received:
    0
    GPU:
    Radeon HD 5650m (550/800)
    Because the problems weren't about the frame rate, but rendering problems and low-res textures.
     
  9. Ziver

    Ziver Member

    Messages:
    20
    Likes Received:
    0
    GPU:
    Zotac GTX 1080 AMP Extrem
    Any performance diffrence between this new driver and older rage performance driver ?
     
  10. blinx

    blinx Maha Guru

    Messages:
    1,022
    Likes Received:
    0
    GPU:
    Asus 680
    Alot of strange behavior with this driver in other games gonna have to switch back to something else
     

  11. Geralt

    Geralt Master Guru

    Messages:
    284
    Likes Received:
    0
    GPU:
    Radeon RX 580 8GB
    Should I be using the latest CAP with these or it is included?
     
  12. iamgamefreak

    iamgamefreak Active Member

    Messages:
    84
    Likes Received:
    0
    GPU:
    Sapphire R7 265 Dual-X
    This driver crashes with applications like GPU Caps Viewer and Video Converters that use AMD APP acceleration. Tried installing twice after cleaning with driver sweeper. Back to Preview 1 drivers.
     
  13. LiquidFrost

    LiquidFrost Member Guru

    Messages:
    146
    Likes Received:
    1
    GPU:
    EVGA GTX 970 FTW
  14. Visuallyvisible

    Visuallyvisible Active Member

    Messages:
    84
    Likes Received:
    7
    GPU:
    1070
    Good to hear they're enhancing SLI performance....
    Crossfire performance could do with some, i dunno how to put it...ummmmm ENABLING!

    Look forward to doom4 when it's on a $5 sale coz after this clust fudge ID are dead to me.
     
  15. AndyMutz

    AndyMutz Master Guru

    Messages:
    311
    Likes Received:
    16
    GPU:
    EVGA GTX1080TI FTW3
    this is how rage looks on my machine now, that is with 11.10 preview 2 drivers and rage patch 1 installed:

    [​IMG]

    -andy-
     

  16. streakpt

    streakpt Master Guru

    Messages:
    277
    Likes Received:
    0
    GPU:
    Sapphire 290 Crossfire
    Look good Andy...
     
  17. foxX

    foxX Member Guru

    Messages:
    122
    Likes Received:
    2
    GPU:
    MSI Vega 56 AB OC
    It seems that I managed to make the game somewhat playable on my machine.
    This driver.
    Catalyst A.I. turned to standard.
    -> from the game: jobs_numthreads 0. Even though the CPU flatlines at 100%, there's only some minor stuttering. Game runs at 30-60 FPS on E8400 + radeon 4850.
     
  18. lenne

    lenne Master Guru

    Messages:
    352
    Likes Received:
    0
    GPU:
    1080 GTX Gainward
    Rage runs nearly perfect here, only drawback is no xfire at the moment, the patch didnt make a difference at all, for anyone still ahving problems heres my config:

    \rage\base\rageconfig.cfg

    seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
    seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
    seta image_anisotropy "16" //Using the highest setting here but you can set as 2, 4 or 8
    seta image_usecompression 0
    seta image_filter "GL_LINEAR_MIPMAP_LINEAR" //filtering for light maps
    seta image_preload "1" //Use preload images when ever possible
    seta image_lodbias "-1" //LoD settings
    seta image_ignoreHighQuality "0" //Sets up for using HQ gfx
    seta image_ignoreLowQuality "1" //ignores the low textures
    seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
    seta image_cacheMegs "125" //Cache size in Megabytes
    seta image_cacheMinK "50" //Cache minimum size in kilobytes
    seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
    seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
    seta r_shadowsHighQuality "1" //Fore High Quality shadows
    seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
    seta r_renderer "best" //highest rendering options
    seta r_multiSamples "32" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
    seta r_useHBAO "1" //Ambient occlusion
    seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
    seta r_visDistMult "1"
    seta r_useMotionBlur "1" //use blur
    seta r_skipBump "0"
    seta r_skipSpecular "0"
    seta r_skipNewAmbient "0"
    seta r_shadows "1"
    seta r_cgFragmentProfile "best"
    seta r_cgVertexProfile "best"
    seta vt_lodBias "-1" //LoD settings
    //below is cache settings
    seta vt_pageimagesizeuniquediffuseonly2 "8192"
    seta vt_pageimagesizeuniquediffuseonly "8192"
    seta vt_pageimagesizeunique "8192"
    seta vt_pageimagesizevmtr "8192"
    seta vt_uncompressedphysicalimages "0"

    Ingame settings after patch are:

    1920 x 1080

    aa: 8x

    Af: Low ( foobars on high, i think its running out of mem )

    Vsync: on

    Texture Cache: Large

    Driver settings:

    Nothing forced, ai set to advanced ( doesnt make any difference )

    I know this has been postet numerous times before, its only for the people still having Problems, take into account this config is strictly for quad+ core cpus and 4gb+ main memory and 1gb+ gpu memory !!!

    Besides i think Rage is a great game, i really like nearly every aspect of it, especially the engine feels just right, it got this very responsive and direct aiming like all ID titles, so much fun :D
     
    Last edited: Oct 9, 2011
  19. MJay27

    MJay27 Master Guru

    Messages:
    273
    Likes Received:
    0
    GPU:
    Sapphire HD7850 2GB DDR5
    I have got exactly the same. No matter what i set in the graphic options. Now that was a fine patch. :biggun:
     
  20. foxX

    foxX Member Guru

    Messages:
    122
    Likes Received:
    2
    GPU:
    MSI Vega 56 AB OC
    rage doesn't support com_videoRam
     

Share This Page