AMD Cat 11.10 Preview 3

Discussion in 'Videocards - AMD Radeon Drivers Section' started by GaBBa-Gandalf, Oct 17, 2011.

  1. Solid_State

    Solid_State Member Guru

    Messages:
    105
    Likes Received:
    0
    GPU:
    5870 VF3000A / GT430
    Installed fine no errors.

    I never uninstall before installing new drivers because I have never had any issues. :S
     
  2. Vampero

    Vampero New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    2-Sapphre 6970 2gig
    AMD VISION Engine Control Center color

    I install 11.10 preview 3 and the color is fine until I reboot after installing AMD Catalyst 11.9 cap2.

    I go to My Digital Flat-Panels options and the color options is gone 8(..I do a repair and it never comes back.

    All my installs are fully cleaned before I install the up dated drivers.

    Is there a work around to fix that please?
     
  3. Igor007

    Igor007 Member

    Messages:
    22
    Likes Received:
    0
    GPU:
    XFX RX480 8GB
    Huge slowdown and CTD in RAGE authority level. putted atioglxx.dll from preview 2 into rage and the game was working fine. P.S. lame ending :)
     
  4. diogo_cme

    diogo_cme Member Guru

    Messages:
    131
    Likes Received:
    0
    GPU:
    MSI Cyclone 6850 OC
    ...I'll just lurk this thread before installing.
     

  5. robolee

    robolee Member

    Messages:
    34
    Likes Received:
    1
    GPU:
    NITRO+ RX 570 4GB
    I will just wait for the offical ver as usual. can't trust beta driver @ all!
     
  6. slckb0y

    slckb0y Banned

    Messages:
    758
    Likes Received:
    0
    GPU:
    GV-N470SO-13I@900/2000 x3
    here's a screen of the new menu i got in ATT.

    [​IMG]

    about sure it wasn't there before. on the other hand, can someone confirm a loss of FPS in crysis 2 or any other game for that matter ?
     
    Last edited: Oct 18, 2011
  7. Skynet5

    Skynet5 New Member

    Messages:
    8
    Likes Received:
    0
    GPU:
    eVGA 680 SLI
    Well I've tried this driver. Still no crossfire support directly in the build.

    I also get stuttering odd slow downs...and vsync doesn't stay enabled.

    Shame really, as I've put in 4 hours and the game looks like it could be good. But it certainly isnt the quality it should be on my rig.

    Use to love ID software...bought most of their games and expansion packs when I was a kid.... Kinda left bad taste in my mouth now. I'll boot it up at Christmas and enjoy it then...hopefully..

    One thing I will b*t*h about is Carmack saying they tested this on ATI rigs. Rubbish mate. You tested it 1 single machine in a the corner of your testing lab. At least have a flavour of ATI video cards from their range and test it to cover a few popular cards 4870, 4970, 5870 5970 6970 etc... Just after the money...after all the years the PC supports spent buying your games!
     
    Last edited: Oct 18, 2011
  8. Valagard

    Valagard Guest

    You need to uninstall the old CCC before installing the new CCC, or it won't run after reboot

    Getting tired of telling people to -FULLY- uninstall old display drivers before installing new ones.....
     
  9. rongtw

    rongtw Member Guru

    Messages:
    116
    Likes Received:
    0
    GPU:
    asus 1060 strix
    uninstalled previous driver 11.10 preview 2 ,,, :bang: tried to install new got BSOD :bang::bang: now i cant even install 11.9 , installer freezes not responding !! on all ati installs :(
     
  10. TheOriginalTO

    TheOriginalTO Master Guru

    Messages:
    288
    Likes Received:
    0
    GPU:
    5500 XT / 8gb
    Has Asder approved this message? haha.
     

  11. sccone

    sccone New Member

    Messages:
    4
    Likes Received:
    0
    GPU:
    AMD 6670
    i did, i even use drive sweeper to clean everything. still not work
     
  12. slckb0y

    slckb0y Banned

    Messages:
    758
    Likes Received:
    0
    GPU:
    GV-N470SO-13I@900/2000 x3
    have done it under safe mode ? then run a little Ccleaner registery scan
     
  13. asder00

    asder00 Don Di Driver Staff Member

    Messages:
    1,193
    Likes Received:
    3
    GPU:
    RX VEGA 64 Liquid
    CatalystCreator: Cat 11.10 V3 - will be released officially tomorrow (we wanted to do some Rage testing) - but I see that it's already out in the wild...
    CatalystCreator: BattleField 3 - there will a CAP update later this week to resolve CrossFire issues - use in combination with the either V2 or V3 driver
    CatalystCreator: Cat 11.10 V3 preview only includes additional Rage fixes from V2
    CatalystCreator: Cat 11.10 official release will happen Oct 31 - but Catalyst 11.10 V3 is pretty much the identical driver, so use with BF3 (plus new CAP)
     
  14. GaBBa-Gandalf

    GaBBa-Gandalf Member Guru

    Messages:
    150
    Likes Received:
    0
    GPU:
    2 x XFX HD6970 2GB
    Thx for that info :)
     
  15. Campacci2k

    Campacci2k Active Member

    Messages:
    99
    Likes Received:
    0
    GPU:
    R9 280X 3 GB
    Same thing here the previous driver. Photoshop CS5 disables the use of the GPU because of OpenGL. Brink (for example), try to start e. .. The driver stopped responding and has recovered.

    Anyone else?
     

  16. Tmax

    Tmax Member

    Messages:
    28
    Likes Received:
    0
    GPU:
    ATI 5870 Crossfire
    Hmm...AMD Vision Control Center worked with 11.10 Preview 2 but, not with preview 3 on my system. Crossfire 5870. One step forward, two steps back. I may need to go back to preview 2 when BF3 comes out next week. I sooooo hope PC's get an early release. :p
     
  17. Stone Gargoyle

    Stone Gargoyle Ancient Guru

    Messages:
    5,791
    Likes Received:
    441
    GPU:
    GTX 1060 G1
    These fixed up RAGE nicely for me:

    [​IMG]
    [​IMG]
    [​IMG]

    Now I just need id to fix the damn crashing between areas. :bang:
     
  18. Stone Gargoyle

    Stone Gargoyle Ancient Guru

    Messages:
    5,791
    Likes Received:
    441
    GPU:
    GTX 1060 G1
    Forgot to add my settings:

    [​IMG]
     
  19. Tmax

    Tmax Member

    Messages:
    28
    Likes Received:
    0
    GPU:
    ATI 5870 Crossfire
    Went back to preview 2 and now Vision Control Center doesn't work. No clue what is going on with this.
     
  20. iamgamefreak

    iamgamefreak Active Member

    Messages:
    84
    Likes Received:
    0
    GPU:
    Sapphire R7 265 Dual-X
    Same here, doesn't happen if Catalyst is enabled...but RAGE won't run. If catalyst is disabled, RAGE runs fine but other openGL apps don't run. I suspect Catalyst AI is the culprit here...:3eyes:
     

Share This Page