Hi friends, I have three problems with a Jieshuo 6600m card (it is the same as 51risc and Mllse). 1- When I give the command to turn off the PC in Windows 10 the PC restarts. I have tried all the tricks on Youtube and nothing (modify regedit entries, disable quick reset, etc), I even tried to start Windows 10 in safe mode and when I give the shutdown command it keeps restarting. I also tried disabling booting from the PCI express from the Bios and I still have the same problem. 2- The other problem I have is that the configuration in AMD Software is deleted by itself. If I apply any change a few days later it is deleted. 3- And the third problem I have is that I have 2 monitors, one connected by HDMI and the other by Display Port and the primary monitor and the secondary monitor are randomly exchanged, to the point that now when Windows starts it shows me the Windows logo on the primary monitor and after that the image is disabled on it and the secondary monitor becomes the primary and the only monitor that gives image, because when I get to the desktop the primary monitor does not recognize it (being that before reaching the welcome screen the primary monitor if it works). I wanted to know if there is a way to leave the AMD Software configuration in read-only mode or something like that, so that I am not deleting the configuration of the monitors. And besides that if there will be any solution to the reboot problems I have when I hit shutdown in Windows. Have a nice day.