AGP slots and voltage

Discussion in 'Links' started by Glidefan, Feb 8, 2003.

  1. Glidefan

    Glidefan Don Booze Staff Member

    Messages:
    12,318
    Likes Received:
    1
    GPU:
    GTX 1070 | 8600M GS
    Originally made by syntax_error

    AGP slot/card support status:
    Generally...

    If AGP 1.0 or 2.0 card is running in 2x, 1x mode it will use 3.3v
    If AGP 2.0 or 3.0 card is running in 4x mode it will use 1.5v
    If AGP 3.0 card is running in 8x mode it will use 0.8v

    AGP 1.0 slot supports 1x and 2x at 3.3v

    AGP 2.0 slot supports 1x and 2x at 3.3v
    AGP 2.0 slot supports 4x at 1.5v

    AGP 3.0 slot supports 4x at 1.5v
    AGP 3.0 slot supports 8x at 0.8v

    AGP 2.0 and 3.0 cards and slots overlap nicely. Hardly anyone has sold an AGP 1.0 anything for a couple of years now.

    The only real 'bender' to these rules is that some boards based on Intel chipsets with an AGP 2.0 slot do not support 3.3v (2x, 1x) AGP operation. These boards will usually feature a large warning sticker or be keyed to not accept an AGP 1.0 card.
     
    Last edited by a moderator: Feb 9, 2003
  2. revin

    revin Guest

     
  3. ghostkk

    ghostkk Guest

    possible to get it running by 4x ? i also have the problem with you my ti4200 is running at 2x with extreme low scores with 3dmark 2k1
     
  4. revin

    revin Guest

    Only if you're motherboard supports 4X.
    Although the 2X is a liminting factor, I can run all the stuff/"candy" maxed out without any trouble.
     

  5. auggie dog

    auggie dog Member Guru

    Messages:
    115
    Likes Received:
    0
    GPU:
    2x Evga GTX 670 FTW
    My abit AI7 shows that im getting 1.22v at the agp slot what gives.I have set to 1.65 in the bio and still 1.22v.Shouldnt it be aleast 1.5v.I have 6800 nu thank god it doesnt have any trouble running on these voltages but i would like the right amount what can i do to fix this?
     
  6. revin

    revin Guest

    I just looked at mine and see the same thing, I dont have a reason for that at this time either.
     
  7. LP03

    LP03 Member Guru

    Messages:
    153
    Likes Received:
    0
    GPU:
    MSI NX8800GT 512MB OC
    My mobo is AGP3.0 and it says in the manual that it only supports cards keyed for 1.5v... can anyone shed some light on this cause I want to get a RADEON 9600XT and I don't know if it will work...

    Cheers in advance.
     
  8. amusing

    amusing New Member

    Messages:
    1
    Likes Received:
    1
    Nice info. Thanks!
     
    1 person likes this.
  9. Dr. Vodka

    Dr. Vodka Ancient Guru

    Messages:
    3,803
    Likes Received:
    9
    GPU:
    Sapphire R9 290 Tri-X
    This actually helped me out solve some problems with a friend's rig.
     
  10. generalRage1991

    generalRage1991 Active Member

    Messages:
    51
    Likes Received:
    0
    GPU:
    2x 4870x2
    there is new agp v3.5
    and dont suport older grafic cards and some of new grafic cards
     
    Last edited: Feb 25, 2006

  11. danish1705

    danish1705 Member

    Messages:
    40
    Likes Received:
    0
    GPU:
    Sapphire Radeon HD 7970
    Hi all, im a noob in this forum. I would like to seek some assistance from you all. Here is my story.

    Recently i hhad just bought the MSI-GeForce NX6600 GT DDR3 128MB 8AGP card for my new game the Ghost Recon ; Advanced Warfighter. Previously i use same brande which is MSI-GeForce FX5500 256MB (the oldest i have is MSI-GeForce4 Ti 4200 128MB 4AGP) which cannot run this new game and so i had to replace it.

    Previously using the old card i manage to play the game without having any problem except the lack of graphic quality, shaders, lagging etc. Also with the 2 old cards i can play Splinter Cell Chaos Theory and other games.

    When i purchase the new card, i can play the game, but to my surprise my PC screen will turn to pitch black and my pc seems like in a "hang" mode untill i need to press the off button then it is okay.

    Same goes if i play my splinter cell game, the screen will turn pitch black and the pc seems to be hang. If i play other games which does not need higher graphic, my pc seems to be okay.

    First i suspect is my PC PSU as at the back of the PSU it said 250watt max. When i call my local shop where i bought the PSU, they said it is 350watt. Do you guys out there have some kind of software/programs to check what is my actual PSU watts?

    Below is my pc specs:

    AMD Athlon 64 bit 3200+
    GeForce NX6600GT DDR3 128MB 8AGP
    Kingston PC-3200 DDR400 1.5GB (3 slots
    K8T MS-6702 (v1.X) ATX Mainboard
    Western Digital 80GB Sata Drive
    1 combo DVD/CD-writer
    Samsung SyncMaster 713n


    One more thing the new vid card seems like to have an power connector on the card and the box come with an extra power cord. Do i need to connect this power connector?


    So guys, please do help me, right now i dont know what else to do.

    ---danish
     
  12. teraeric

    teraeric New Member

    Messages:
    3
    Likes Received:
    0
    yes, you do need to plug in the 4 pin molex power... card will proably work fine then...

    turn off the pc before u do, though...
     
  13. Shamil

    Shamil Member

    Messages:
    43
    Likes Received:
    0
    GPU:
    eVGA 6600GT 128mb AGP w/VF700cu

    My 6600GT on Abit IC7-G Max II Advance is AGP 3.0 in 8x mode: Both the ABIT monitoring program and the voltage settings in BIOS say that the AGP voltage is 1.55v.
     
  14. vupkiran

    vupkiran Active Member

    Messages:
    58
    Likes Received:
    0
    GPU:
    Zebronics FX5500 AGP 256MB
    AGP BUS:
    Device : GeForce FX 5500 [NV34.6]
    Version : 3.0
    AGP enabled : No
    Mode AGP3 : No
    4GB : No
    FW Transfer : Yes - Disabled
    SideBand : Yes - Disabled
    Command Queue : 1 (max. 32)
    Transfert Rate supported : 4x
    Transfert Rate : 0x

    does this mean my bus is running at 4x?
    if yes.... how can i get it to run at 8x?

    i m a newbie plzzz help

    how can i see the voltage? my mobo does'nt support overclocking :(
    it does'nt show anything in bios 'Frequency and Voltage' settings :(

    my fsb is 133
    is there anyway that i can increase my FSB other than through bios?
     
  15. MonaroMan

    MonaroMan New Member

    Messages:
    4
    Likes Received:
    0
    GPU:
    PALIT Nvidia GeForce 7600GS 256mb
    Sorry for bringing up an old thread, but I am having in-game problems with my PALIT GeForce 7600GS AGP. It is a little over a month old. The voltage in the BIOS is set to 1.5v, but other options include 1.55v, 1.6v and 1.65v. Would it damage my video card if I increased the voltage to eliminate this problem? What would be the wise thing to do here.

    Here is a screenshot of what happens in Pro Evolution Soccer 6 (it only happens 50% of the time, and it usually fixes by rebooting).
    [​IMG]

    I also get this problem ALL of the time with Sims 2, but that doesn't worry me much because I rarely play it.

    Please help, and thanks in advance.
     

Share This Page