Afterburner 2.1.0 Beta 6 (2011-01-14)

Discussion in 'MSI AfterBurner Application Development Forum' started by msi-afterburner, Jan 14, 2011.

  1. DarthElvis

    DarthElvis Master Guru

    Messages:
    221
    Likes Received:
    0
    GPU:
    Gigabyte gtx980 g1
    Someone could say the exact same thing about the Nvidia guys. Especially the dick part. Not pointing fingers, just saying.
     
  2. lmimmfn

    lmimmfn Ancient Guru

    Messages:
    10,453
    Likes Received:
    127
    GPU:
    AorusXtreme 1080Ti
    Good to see the ban, hope this gets resolved and Unwinder returns, i do think someone needs to take all the questions, whether MSI staff or someone nominated
     
  3. allesclar

    allesclar Ancient Guru

    Messages:
    5,711
    Likes Received:
    111
    GPU:
    GeForce GTX 1070
    +1

    yeah, but it is a case of so many new people liking the idea of rivatuner and afterburner, DONT read up on it and come crying here when things go wrong.

    glad the cock was banned, could have cost us a really damn good member :(
     
  4. Illnino

    Illnino Master Guru

    Messages:
    603
    Likes Received:
    0
    GPU:
    XFX 290x EK H20
    No issues here at all on my 6970, will test with CF when my other card arrives tommorow.

    Nice job.
     

  5. Booj

    Booj New Member

    Messages:
    4
    Likes Received:
    0
    GPU:
    MSI R6870
    oooh Lightning cards? :D

    Any hints as to when they will be released?
     
  6. orion24

    orion24 Master Guru

    Messages:
    836
    Likes Received:
    0
    GPU:
    GTX 680 @ 1254/1703
    When you set to DISPLAY IN LCD, the LCD arrow buttons function incorrectly.

    Right arrow slides the screen down
    Left slides it up
    Down slides it right and
    Up slides it left

    The same I detected to be the case with EVGA Precision 2.0.2. In Rivatuner the screen does not slide at all.

    Anybody with the Logitech LCD has the same problem?
     
  7. CristiM74

    CristiM74 New Member

    Messages:
    1
    Likes Received:
    0
    GPU:
    Gigabyte 6970 2Gb
    I have a Gigabyte 6970. Flashed with ASUS 6970 BIOS then flashed back the original BIOS.
    Voltage control is not working for me. Why?
    I can run Vantage @ 955/1520 with default volts.
     
    Last edited: Jan 18, 2011
  8. giusemanuel

    giusemanuel Member

    Messages:
    26
    Likes Received:
    0
    GPU:
    Powercolor 5970 2gb
    Still with this version if msi afterburner(2.1.0 beta 6) the frequency in 2d of 5970 are miss.
    the frequency of core and memory (in order) are
    gpu1 157/300
    gpu2 735/1010

    in 2d the second gpu is off,and it isn't possible that the frequency of second gpu are 735/1010,but are 0/0.
    In Catalyst Control panel infact,the frequency of gpu2 are 0/0

    When you correct this problem?

    Thanks
     
  9. Blitz6804

    Blitz6804 Member Guru

    Messages:
    106
    Likes Received:
    0
    GPU:
    GTX 780 @ 1020/1502
    The problem is on your end giusemanuel. You have to disable ULPS to fix it. If you check GPUz or any monitoring software other than CCC, you will notice the second card actually does go to 735/1010, not 0/0 as CCC shows. Disabling ULPS, and both cards will drop to 157/300 (or 400/1010 if overclocked) as intended.
     
  10. DM_777

    DM_777 Master Guru

    Messages:
    210
    Likes Received:
    0
    GPU:
    Winfast 9600GT & HD3870
    i found a bug, and i'm sorry if it's already been answered.

    but it seems that when using compatibility mode, the on screen display won't show up.

    does anyone know how to resolve this, i've just started using MSI AfterBurner since 2.1.0 beta 5.
     

  11. nguyenthevuong

    nguyenthevuong Member

    Messages:
    20
    Likes Received:
    0
    GPU:
    MSI
    I have a bug:
    My PC: MSI P55A-Fuzion/ i3 530/ Gskill 2x1GB/ MSI R6850 Cyclone Power Edition
    I use Afterberner 2.1.0 Beta 5 and Beta6/ Windown7 Untimate 64bit.
    Graphic Driver 10.10 and 10.12
    Defaul: IDLE 0.949Vol, Full 1.149Vol
    But when i increase "Core Voltage" and Apply, it alway down to 920 mVol :(
    I can't add Core Voltage. Help me fix it.
     
  12. Mr.Joe

    Mr.Joe Master Guru

    Messages:
    287
    Likes Received:
    0
    GPU:
    670DC2-1333/3915-EK~H20
    Aight so what do i do to get rid of the bluescreen... think it's 0x00000003B or something. SOMETIMES when i change the voltage? :S
     
  13. giusemanuel

    giusemanuel Member

    Messages:
    26
    Likes Received:
    0
    GPU:
    Powercolor 5970 2gb
    ok,
    i have modified the file EnableUlps that is located in
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\C lass\{4D36E968-E325-11CE-BFC1-08002BE10318} changed the value exadecimal from 1 to 0.

    In this path there is another file Ulps that is EnableUlps_NA and that is already setted at 0.

    what is located the other EnableUlps that i must modify?
    thanks
     
  14. Blitz6804

    Blitz6804 Member Guru

    Messages:
    106
    Likes Received:
    0
    GPU:
    GTX 780 @ 1020/1502
    EnableULPS should be located in subfolders 0001 and 000x, usually x=2. I am talking only the DWORD, not the SZ you mentioned.
     
  15. giusemanuel

    giusemanuel Member

    Messages:
    26
    Likes Received:
    0
    GPU:
    Powercolor 5970 2gb
    ok,
    i have modified the file EnableUlps REG DWORD that is located in
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\C lass\{4D36E968-E325-11CE-BFC1-08002BE10318}\0000
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\C lass\{4D36E968-E325-11CE-BFC1-08002BE10318}\0001
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\C lass\{4D36E968-E325-11CE-BFC1-08002BE10318}\0002
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\C lass\{4D36E968-E325-11CE-BFC1-08002BE10318}\0003


    there are other EnableUlps in
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Video\{463F26E4-6CE6-493A-AD8C-D02F9D5FB101}\0000
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Video\{463F26E4-6CE6-493A-AD8C-D02F9D5FB101}\0001
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Video\{463F26E4-6CE6-493A-AD8C-D02F9D5FB101}\0002
    they are already setted at 0.
    is it wrong or right?

    there are other EnableUlps in
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\amdkmdag
    this is setted at 1;must i set this at 0?

    thanks!
     

  16. Blitz6804

    Blitz6804 Member Guru

    Messages:
    106
    Likes Received:
    0
    GPU:
    GTX 780 @ 1020/1502
    Only change the status of the first four. The ones in Control\Class. Leave the rest alone.
     
  17. msi-afterburner

    msi-afterburner Master Guru

    Messages:
    417
    Likes Received:
    0
    GPU:
    MSI N275GTX Lightning
    Make sure you didn't use 3rd party software to control the graphics card.. most of issues happened because of it.
     
  18. Pyr0

    Pyr0 Master Guru

    Messages:
    592
    Likes Received:
    2
    GPU:
    EVGA 1080ti FTW3
    check your cpu vcore. 3B errors are usually related to cpu voltage. do you get the same errors at stock speeds?
     
  19. nguyenthevuong

    nguyenthevuong Member

    Messages:
    20
    Likes Received:
    0
    GPU:
    MSI
    I don't use 3rd software :(
     
  20. Mr.Joe

    Mr.Joe Master Guru

    Messages:
    287
    Likes Received:
    0
    GPU:
    670DC2-1333/3915-EK~H20
    Fixed it :]
    Turns out it was the cfx powersaver. Whatever it's called that was messing it up. Couldn't find the button in the ccc so I did the registry fix....
    Anyways. Works all good now. Custom fan profile, power saving profiles and no bsod <3
     

Share This Page