7970 idle temps?

Discussion in 'Videocards - AMD Radeon' started by Ouroboros_, Dec 12, 2012.

  1. Ouroboros_

    Ouroboros_ Guest

    Messages:
    8
    Likes Received:
    0
    GPU:
    XFX r9 290 crossfire
    Last edited: Dec 12, 2012
  2. Pill Monster

    Pill Monster Banned

    Messages:
    25,211
    Likes Received:
    9
    GPU:
    7950 Vapor-X 1100/1500
    Temp are pretty high especially idle temp, but that's prob because you're using a reference cooler.
     
  3. XBEAST

    XBEAST Ancient Guru

    Messages:
    1,600
    Likes Received:
    0
    GPU:
    MSI GTX 770 Gaming
    That's a pretty decent cooler if it can keep GPU temp lower than room temp :D

    Load temp seems fine. Idle temp is high because of higher clock. It's either because you have a second monitor connected or you screwed up a little by flashing (and why the f*ck would you do it anyways?). Nothing serious though. GPU clock should be 300 MHz idle.
     
  4. Pill Monster

    Pill Monster Banned

    Messages:
    25,211
    Likes Received:
    9
    GPU:
    7950 Vapor-X 1100/1500
    Wait - 65c room temp? I don't think so.....might wanna recheck that OP. :3eyes:
     

  5. Ouroboros_

    Ouroboros_ Guest

    Messages:
    8
    Likes Received:
    0
    GPU:
    XFX r9 290 crossfire
    guilty as charged

    I am using 2nd monitor, HDMI out mirrored to tv ....:3eyes:
    and Yes I did screw up the flash,
    I tried to flash it through windows and partially wrote info before giving me an error, wouldn't boot from the card..

    had to change the graphics to integrated,
    found a backup .bin in another forum, Dos booted atiflash, and flashed
    I thought everything went smoothly...so your telling me it does not overwrite completely there still some remnants of f'ed up bios in there? :bang:

    (Sorry thank you room temp is 65 Fahrenheit)
     
    Last edited: Dec 12, 2012
  6. Ouroboros_

    Ouroboros_ Guest

    Messages:
    8
    Likes Received:
    0
    GPU:
    XFX r9 290 crossfire
    here is an update...
    MSI after burner user defined fan control setting enabled ..
    [​IMG]
    does this seem normal?

    update: disconnected the 2nd monitor...
    success!:banana: back to 31c idle at 20% fan
    thank you XBEAST!
     
    Last edited: Dec 12, 2012

Share This Page