[3rd-Party Driver] Amernime Zone Radeon Insight 22.5.1 WHQL Driver Pack (Released)

Discussion in 'Videocards - AMD Radeon Drivers Section' started by mylipho15, Feb 5, 2021.

?

Are you satisfying using NimeZ AMD Radeon Drivers?

Poll closed May 17, 2021.
  1. Yes

    47 vote(s)
    77.0%
  2. No

    14 vote(s)
    23.0%
  1. shenosuke

    shenosuke Member

    Messages:
    15
    Likes Received:
    5
    GPU:
    RX580
    I've formated windows, and nothing , its just not work anymore for me. Maybe could have some regedit tweak to force SAM in W10? the only thing that comes to my head is that exists some kind of soft block in windows...
     
  2. mustdiex

    mustdiex Active Member

    Messages:
    53
    Likes Received:
    19
    GPU:
    580
    r9 380 4 gb rez.bar test benchmart Rdr2
    rez bar off rez bar on
    [​IMG] [​IMG]
    [​IMG]
     
    Fafnyr, Cryio and ShiftC like this.
  3. D1stRU3T0R

    D1stRU3T0R Master Guru

    Messages:
    569
    Likes Received:
    172
    GPU:
    8 GB
    One small request, can you enable unofficial OC, so we don't have to use MSI Afterburner? My GPU crashed today and I can't use it anymore with msi afterburner for some reason
     
  4. Nicatorium

    Nicatorium New Member

    Messages:
    4
    Likes Received:
    3
    GPU:
    Nvidia RTX 2060 8GB
    Hello. I use Ryzen 7 4800H via Vega Graphics. I suffer freezing, shuttering on speacially watching videos on Youtube. I installed latest nimez hotfix but it dindt solved. I wanted to install LTS version but drivers not installed. How to solve this problem?
     

  5. mylipho15

    mylipho15 Maha Guru

    Messages:
    1,344
    Likes Received:
    1,168
    GPU:
    AMD Radeon HD 8790M
    You need to configure Browser Chrome or Edge Flags like this
    upload_2021-12-16_21-13-34.png
    Then install K-Lite Mega Codec Pack and configure the setup like this video.

    Assign the LAV Video "Hardware Device to Use" to Ryzen iGPU
    upload_2021-12-16_21-33-22.png
     

    Attached Files:

    Last edited: Dec 16, 2021
    reslore and Nicatorium like this.
  6. reslore

    reslore Active Member

    Messages:
    77
    Likes Received:
    59
    GPU:
    ASUS Vega 64
    Can confirm this helps with hardware acceleration issues for my Vega 64 setup.

    Another thing that helps me for Hardware Acceleration is adjusting your minimum Clock State higher, if a high resolution / high fps video stutters or drops out it's probably your 2d clocks being too low. - The only real drawback is a slight (7 to 10 watts or so) increase in idle power consumption.

    Undervolt.PNG
     
  7. mylipho15

    mylipho15 Maha Guru

    Messages:
    1,344
    Likes Received:
    1,168
    GPU:
    AMD Radeon HD 8790M
    IMO When compared to DXVA2, D3D11VA is more stable. Also now watching Youtube with lower cpu & gpu usage at 4K60fps on ryzen 3 3250u testbench which my friend have.
     
    reslore likes this.
  8. ShiftC

    ShiftC Member

    Messages:
    15
    Likes Received:
    14
    GPU:
    R9 380
    Dude as i said before; Turning rBAR/SAM off via NzSetup doesn't really turn off that option. It's still activated and that's why those monitoring tools show it as still enabled. I confirmed it through my benchmarks with 3DMark TimeSpy and RotTR. If once enabled - and that's automatically the case if u install the latest nimez package - it remeains enabled and both benchmarks result in a performance loss. TimeSpy with minus 75% (which is very confusing) and RotTR with minus 5fps.
    The only way to turn it off is by turning it off in bios. I suppose it's a driver conflict or a implementation failure. Don't know, but hwinfo does not show you incorrect information about that.

    Would be nice if we could compare same benchmarks with timespy or RotTR if anybody has it.

    First benchmark should be with deactivated rBAR in bios state - 3 runs
    Second benchmark should be with activated rBAR both in bios and NzSetup with confirmation of correct heapsize in hwinfo.

    Maybe my results are only related to my gpu.
     
  9. DIETECNO

    DIETECNO New Member

    Messages:
    7
    Likes Received:
    0
    GPU:
    AMD HD 6770 OC
    error 1603 while installing drivers on a hd 6770
     
  10. PhenixN70

    PhenixN70 Active Member

    Messages:
    87
    Likes Received:
    11
    GPU:
    MSI R9 390 8GB
    I can test it, I have this game on Steam. Need only RotTR? SotTR not working with rbar?
     
    ShiftC likes this.

  11. ShiftC

    ShiftC Member

    Messages:
    15
    Likes Received:
    14
    GPU:
    R9 380
    I don't have SotTR, but feel free to test it dude.
     
  12. Fafnyr

    Fafnyr Active Member

    Messages:
    66
    Likes Received:
    43
    GPU:
    R9-390+
    [​IMG]

    I Love it :]

    gr33tz
     
  13. foetopsyRus

    foetopsyRus Member

    Messages:
    36
    Likes Received:
    1
    GPU:
    RTX 3070 vision oc
    could not install 21.11.1 V4 on HD 6770 driver gives error 1603 without problems installed 21.10.1-LTS-Rev2.0 after installing VisualCppRedist_AIO_x86_x64 otherwise it gave an error
     
    Last edited: Dec 17, 2021
  14. AbdelRahim Jawad

    AbdelRahim Jawad New Member

    Messages:
    7
    Likes Received:
    1
    GPU:
    RX 570 / 4GB
    So I have RX 570 - 4GB, windows 11, i have installed the driver perfectly, but rBAR or SAM not working even i enable it from the system, i have it enabled in BIOS and Secure bot enabled,

    upload_2021-12-17_10-30-15.png
     
    Ruffes107 likes this.
  15. D1stRU3T0R

    D1stRU3T0R Master Guru

    Messages:
    569
    Likes Received:
    172
    GPU:
    8 GB
    But terascale doesn't have 21.12.1, last is the Release LTS Adrenalin Terascale DX11 rev 4.0
     

  16. foetopsyRus

    foetopsyRus Member

    Messages:
    36
    Likes Received:
    1
    GPU:
    RTX 3070 vision oc
    I was wrong, I mean 21.11.1 thanks for correcting me
     
  17. Ruffes107

    Ruffes107 Member

    Messages:
    10
    Likes Received:
    0
    GPU:
    AMD RX 580
    its the same for me with RX 580.
    Hope some one can Resolve it.
     
  18. mylipho15

    mylipho15 Maha Guru

    Messages:
    1,344
    Likes Received:
    1,168
    GPU:
    AMD Radeon HD 8790M
    We are preparing for driver development package, the "last stand" Terascale Dx11.
     
    D1stRU3T0R likes this.
  19. D1stRU3T0R

    D1stRU3T0R Master Guru

    Messages:
    569
    Likes Received:
    172
    GPU:
    8 GB
    same here xd i like how it works for R9 390 but not for us xd

    Also, can you include the tool to extend unofficial OC as MSI Afterburner does? Thanks!
     
  20. mylipho15

    mylipho15 Maha Guru

    Messages:
    1,344
    Likes Received:
    1,168
    GPU:
    AMD Radeon HD 8790M
    I tried it on RX 550 to find the "KMD flags things" which MSI Afterburner written to driver registry (0000). Unfortunately, no registry was changed. It's like Kernel-Level access which msi AB only have.

    Even terrible for NimeZ 21.12.1 Polaris/Vega/Navi release. Which lead to UI bugs like:
    • Load or Save Profile Radeon Tuning are missing after pc is restarted
    • Missing Browser Checkbox Options
    To clarify from youtube User "Ancient Gameplays" say this UI is different from original. That's not true, since this ccc2_install.exe are extracted originally from 21.12.1 package.
    The funny things happened on my RX 550 when trying to repair the UI, Radeon Tuning become unusable, also tried with original driver and same result. So i waiting for 21.12.2 release from amd
     

Share This Page