3D Mark 2008 'Vantage' Guru3d Records

ppu enable rigth ? we have similar rigs and i only get 23k ppu disable

 

Is your card overclocked? I score 29k with his similar rig. Well, I would say 30k because I usually score 29.9k I noticed that with HT on, I score 23k.. weird.
I am going to try it again and let you know..

 

P23416 3DMarks (hardware PhysX off)

http://3dmark.com/3dmv/2851546

P27659 3DMarks (with GPU PhysX)

http://3dmark.com/3dmv/2852221

 

[/URL] Uploaded with ImageShack.us[/IMG]

 

not brilliant

 

^^ resize it a bit mate.

 

Hey all Got a new and Improved Score



With more voltage i could probably push more, but 880Mhz on core was about what i could manage without fine tuning on 1.1mv

EDIT

Just ran the High Preset, couldn't run Extreme.

Score

 

thats still really sweet clocks thats exactly the 6970 clock rates.

 

TriSLI 580 (stock cooling)
980X@4783 (water cooling)
PhysX OFF
P54244

 

CPU at 4Ghz (3DMark shows 5.8Ghz for some reason)

P24246 3DMarks
Result

P28116 3DMarks with GPU PhysX
Result

 

P21163



i5 2500K@ 4.8Ghz
P8P67
2x2Gb Gskill 1600Mhz CL9
HD5870@ 10.12

 

Now using 266.58 drivers and increased cpu from 4.2-4.3ghz, gained nearly 1000 extra points. Great stuff PhysX on.

 

Great score Gibbonlimbs, what cooling are you using on the cpu and cards?

 

Thanks! My i7 is cooled by the Noctua NH-D14, temps at 4.3ghz have never gone above 68 degrees. My 3 EVGA GTX 570's have Stock cooling. When gaming I run them at stock clocks and even though the 3 cards are packed together tight the temps are good. Top and middle Cards max at about 80 degrees and the bottom card is cooler and max temps are about 70 degrees. This is with the GPU fans at 60%. Great cards.

Cheers.

 

4.3GHz 1.4 vcore, you say you never went above 68 not even in stress tests like linyx or you just mean vantage?

My cards are stock cooled aswell and due to mobo design they too are packed one another with the upper one getting as hot as 89-92 and the lower one at like -10 degrees celsius. Then again I run them all the time oc'ed but meh.

 

Hi, I just ran ran Vantage and 3dmark 11 to check the temps, Vantage max temp was 67 and 3dmark 11 was 64. My PC is always in a cool room and I have good case cooling too.

I dont ever run any cpu stress programmes, Im not big into benchmarking but i might run one too see what kind of temps I get.

Cheers.

 

you should run cpu stressing programs to test for stability and temps.

 

Hi, just been running prime95 for 30 mins on the most stressful setting, max temp so far is 78, no probs so far.

Cheers.

 

If you got that in prime than in linyx it will be like 2-3 degrees more and that is great aswell for noctua, it would be good to give it a 25-50 tests run just to test stability of your new OC.

Great temps man, you must really have a chilly room.