1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

3D Mark 2006 Guru3d Records

Discussion in 'Benchmark Mayhem' started by compgeek89, Apr 22, 2006.

Thread Status:
Not open for further replies.
  1. chispy

    chispy Ancient Guru

    Messages:
    8,758
    Likes Received:
    891
    GPU:
    RTX 2080Ti - RX 580

    :eek: jajaja , you are going to take down all of my records uuh ,Get that Xeon some subsero on your SS bro, 3x 4890 good real good set up bro , you little devil mofo you :D , jajjaaa. Let the games begin......


    Angelo.
     
    Last edited: Jul 14, 2009
  2. phrozin

    phrozin Ancient Guru

    Messages:
    2,843
    Likes Received:
    4
    GPU:
    gskill ripjaw 2133
    Thanx chispy makes me rest a bit easyer, all ready up to speed with Georges antics the main reason i went with the dfi, George is 1 of the few ppl here in aussie i now is not full of sh!t he's usally on the money!

    glen lol yeh m8 lets get the gurus back up there carefull of the 4890's all ready toasted a card there pretty fragile not sure about the vrm's temp, been tweeking some bios for them voltage and clocks have managed to get around the 1000mhz clock limit also, waiting on a ra for my card and some water blocks to test them ill give you a pm when got it sorted but atm got to 1250/1150 they haul ass

    ah almost for got go with the corsair 2000 bit pricy but clock like a bitch :)
     
    Last edited: Jul 14, 2009
  3. glenboy

    glenboy Maha Guru

    Messages:
    1,184
    Likes Received:
    0
    GPU:
    2 x 5850's for now
    hiya phroze yes you always liked the crazy graphic core clocks, noone had them higher than you , what voltage did you have on the bios on the blown one i think 1.45 is the max is it without hard mods, it'd be interesting to see the 3dscore difference just with the clocks on the cards changed and leaving all other pc settings the same , i found with my x2's because of the shear processing power it only made a significant difference in 3d03 about 6000 points from memory,but only a few hundred points on the others maybe, can't remeber 01 but in 05 and 06 it was not a huge difference
     
    Last edited: Jul 15, 2009
  4. phrozin

    phrozin Ancient Guru

    Messages:
    2,843
    Likes Received:
    4
    GPU:
    gskill ripjaw 2133
    you can get a bit more than that out of them but the biggest hassle is the 1000mhz limit a real pain but think i got it sorted, yes m8 im not adverese to the ol vmod you aint pushing them till you up around the 1,7v then things start to happen but the vrm temp go crazy even at 1.4v working on a fix for that atm, you can get water blocks for the nv vrms but havent come across 1 for the 4870/4890 yet may haft to make them got to get temps under contol or ill toast a few cards missis will kill me if i blow to many of them, all in all mid to high 30's in 06 is the ball park i think then ill try some nv cards a lot easyer to vmod and a bit tougher :)
     
    Last edited: Jul 15, 2009

  5. Frenchlick

    Frenchlick Master Guru

    Messages:
    267
    Likes Received:
    0
    GPU:
    GTX 480 /32"LCD
    Whacked a third Vapor-X in today and early signs are good for a possible 32-33k run once I get into overclocking them and the cpu some more.

    [​IMG]
     
  6. cowie

    cowie Ancient Guru

    Messages:
    13,192
    Likes Received:
    284
    GPU:
    GTX
  7. chief Dave

    chief Dave Master Guru

    Messages:
    339
    Likes Received:
    0
    GPU:
    4 x 290x
    [hwbot] 31221 - 2 x hd4870x2 @ 777/925 - xeon w3520@4616 mhz on water [/hwbot]
    http://service.futuremark.com/compare?3dm06=11484225
    [​IMG]
    New MB here as my UD5 lost it's 12v rail... love the Rampage II extreme but lots to learn, more to come, temps are good and this is with no pcie oc.
    Dave
     
  8. glenboy

    glenboy Maha Guru

    Messages:
    1,184
    Likes Received:
    0
    GPU:
    2 x 5850's for now
    nice going dave and a cracking score and good overclock on the xeon on h20 and glad to see you've finally put an overclock on those 4870x2's :)

    on a side note whats the temps like on the xeon you have on water at that speed
    cheers
     
  9. death_samurai

    death_samurai Ancient Guru

    Messages:
    3,824
    Likes Received:
    1
    GPU:
    Palit 970 GTX jetstream
    wow i just came back into this thread. Great scores guys.


    Damn 2 x 4870x2. The pt is 3dmarks 06 is cpu intensive. I got 21k at 4.1ghz for my c2d. I am using tri fire x2 with 4870. My damn 4870 from powercolor cannot be Oc nor voltages be set.


    I did fiddle around with the voltage thing for my x2 but i didn't set anything. I can run 3dmarks at around 817mhz and the max 1000mhz on ccc.


    Did u guys manage to go higher than that?? U know the stock fan doesn't seem to be too good in cooling it. I always try and run it at a constant 60-70% when i make it go beyond 800mhz.
     
  10. chief Dave

    chief Dave Master Guru

    Messages:
    339
    Likes Received:
    0
    GPU:
    4 x 290x
    Thanks man:) temps are allways 45 to 50 with this build as my block is 90degrees off lol Love the new mb and now my 24/7 is 4.5 @ 1.45 ht enabled. I need to try the new bios and unlock qpi ratio... or just get a new cpu :)

    I can take the bclk to 222 but it gets very unstable, not even 3d, prime not even close. O well.
    Thanks man!
    Dave
    PS ran vantage same clock but could not get though it even with 1.49 volts, temps where ok but I got scared:nerd:I'd hate to go back to my 920 that only does 4.2 24/7
     

  11. glenboy

    glenboy Maha Guru

    Messages:
    1,184
    Likes Received:
    0
    GPU:
    2 x 5850's for now
    got an i7 xeon coming myself and x58motherboard, so i can join in on some i7 goodness , wanted the rampage II extreme myself like you've got i've always had asus boards and liked them but chispy did me a good deal so got coming a dfi ut x58 to go with my xeon off him

    death samurai with a single 4870x2 i could run 06 at 840ish on core but with 2 of them in it was 817 for me as well, that was 100% fan speed though
     
  12. Frenchlick

    Frenchlick Master Guru

    Messages:
    267
    Likes Received:
    0
    GPU:
    GTX 480 /32"LCD
    Nice score there Chief, any reason why you don't run 8 threads though instead of the 4. Your cpu score at that speed would go close to 8k imo and get you close to 32k overall, I'm guessing it's a heat thing. In 3d06 my cpu gets up to high 80s or just on 90 when running 8 threads and around 1.5v, I wouldn't even dream of running prime or linx on that though lol.


    Interesting to see how ya W3540 goes on the DFI board too Glen. I find on the giga extreme that I need **** loads of qpi/vtt when benching at over 4.55ghz yet at 4.5 on the dot it doesn't. Either way your going to love the combo with 3 x 4890s.
     
    Last edited: Jul 18, 2009
  13. chispy

    chispy Ancient Guru

    Messages:
    8,758
    Likes Received:
    891
    GPU:
    RTX 2080Ti - RX 580
    Great score my old friend Dave :D , this tread its going to be very busy like old times again. Dave overclock your pciX to 115-120 and your bclk wall will be gone ;). Glen im eager to see what kind of sick scores you will be pulling lol. Guys be ready its going to be a race for the highest 3D06 score :D in here. Kepp pushing it guys.


    Chispy.
     
  14. Frenchlick

    Frenchlick Master Guru

    Messages:
    267
    Likes Received:
    0
    GPU:
    GTX 480 /32"LCD
    I can't get my pci-e past 103 on the giga extreme any advice on how to get it further please lol. I'm close to my quadfire score with trifire but unless there's a hard volt mod for my gpus or I can get the cpu further on H20 then this will be it.

    [​IMG]

    I have the only 4890 on the market without the reference pcb I found out last night, so no software volt modding for me plus they overclock terribly lol.
     
  15. chispy

    chispy Ancient Guru

    Messages:
    8,758
    Likes Received:
    891
    GPU:
    RTX 2080Ti - RX 580
    here bro and good luck - '' for max bclk vtt 1.55-1.65 result was same(have tested all voltages) , Vcore:1,55 , Vioh :1.3, rest voltages are default but I talked with hicookie he advised to try lower ioh.

    Pci-ex speed was 129.7 . I dont know why but 129.7 was the best I have tried up to 135 mhz


    I think affect of the cooling made this
    235 with stock cooling
    237 with better cooling than stock (akasa nero -performance is terrible)
    242 with ln2 ''

    Source - extreme systems forum - http://www.xtremesystems.org/forums/showthread.php?t=225264&page=2
     

  16. Matt26LFC

    Matt26LFC Ancient Guru

    Messages:
    3,059
    Likes Received:
    16
    GPU:
    HD630 :(
    [hwbot] 19137 - Asus GTX275 683/1534/1224 stock air - Q9550 @ 3.6Ghz Titan Fenrir [/hwbot]

    Just broke 19K quite happy with that

    [​IMG]

    Reckon i can get my Q9550 up too at least 4Ghz stable so hopefully i'll smash 20K soon :)
     
  17. DSK

    DSK Banned

    Messages:
    17,919
    Likes Received:
    0
    GPU:
    HD5770/BenQ G2220HD
    I suck :(

    [hwbot] 16909 - Sapphire HD4890 - Q6700 @ 3.6Ghz AC7 [/hwbot]

    [​IMG]
     
  18. Matt26LFC

    Matt26LFC Ancient Guru

    Messages:
    3,059
    Likes Received:
    16
    GPU:
    HD630 :(
    Not a bad score Kylzer, can you not up your clocks further CPU and GPU?

    I've just completed another run at 3.8Ghz and hit 20005 not gonna post it, might aswell hit 4Ghz before i send another score in. But i do believe that puts me above Hilbert ;)

    [​IMG]
     
  19. Quixz

    Quixz Maha Guru

    Messages:
    1,310
    Likes Received:
    1
    GPU:
    EVGA GTX980Ti
  20. cowie

    cowie Ancient Guru

    Messages:
    13,192
    Likes Received:
    284
    GPU:
    GTX
    hey i wanna play too:nerd:
    [​IMG][/URL\]
    first dice tests
     
Thread Status:
Not open for further replies.

Share This Page