No you don't all ATI Card Flashing can be "easily" done within OS making sure you create a back up of BIOS before beginning. YOU DO THIS AT YOUR...
Well I went back to 9.9 and realised my temps were the same and idling around 65-68C as summer is coming on. Time for the card to come and and...
Damn is it just me or are others getting higher idle temps with 9.10? As soon as I installed I heard the fan start winding up on my 4850 and...
8.8 3DMark06 14048 650/1050 8.9 3DMark06 14097 650/1050 Going to bench on the w/e, but an extra 49 points there.
It certainly wouldn't hurt, the fans will only ramp with relative temp increases, so it will be very quite with that HS until you apply load....
This BIOS works very well all "stuttering" of the Fan Speed% at ~55C and lower has disappeared and 0 artifacts after >5mins. Thank you Bretware...
Very nice and well structured post.
These are the "Official" release and there maybe some further tweaks that aren't in the 8.8Beta, personally I would upgrade and test with 3dMark06.
I deleted all modded Fan Profiles and changed the main Profile.xml as per your initial post, but just notice that the fan cuts in and out from...
Thanks once again Bretware. I DL and flashed the 660/1050 BIOS and found my fan speed% scaling very well with my GPU xC. I ran ATiTools for...
Nice find but I can't find them? Maybe you could provide a link?
That doesn't look good I would consider RMA of the card that can't be right in both games and uninstalling the drivers. Do you have another PCI-e...
Have to agree I'm folding with 99% GPU load@50% Fan and 62C, ambient temp here is about 14C. You may want to consider removing the HS and...
I agree Furmark is an extreme test and I ramp my fans upto 70-80% when running it to keep at about 70C. Furmark is similar to OCCT and will fully...
I explored this issue before I bought my 4850 and Visiontek offers the BEST Warranty but this brand is not available in Australia:...
I was suffering the same problem and in the end I had to lower my OC on my Q6600 from 3.15 to 3.01GHz and haven't had a problem since. I will be...
The folder location has changed slightly with 8.7 and should be somewhere here: C:\Documents and Settings\Administrator\Local...
Well it looks like you can generate profiles associated with desired applications via profile manager using "all CCC settings". So it is feasible...
Bretware has modded a BIOS that will change Fan speed relative to temp. So if your card is hot the Fan is high rpm (raising noise levels)...
Your doing some excellent work for this series Bretware and ATi should thank you. I did some testing with my current BIOS to assess the...
