This unit mightly only do 4k60 at 4:2:2 or 4:2:0, and you need the X2400 or later for Enhanced mode to do 4k60 at 4:4:4 8bit.
But it could also...
bios has nothing to do with external drive support once in the OS.
Probably not, there is an alternative possibility, do you have any partition manager software installed?
some older ones might have installed a...
Sounds like the drive firmware is damaged.
Delete the volume in disk manager.
Create as NTFS
Otherwise, return for replacement.
cpu usage can tank when a main thread that everything else synchronises to is blocking on another task to complete, won't matter what cpu you have...
that usually means your cpu has become the contention point.
its a known driver issue with 430.39 and later when MSAA is enabled.
have you ignored the people who blame video drivers for all their issues?
then something in your chain is not hdmi 2.0 compatible.
If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and “Resolution” is set to “Auto”, the signals are output with a
the hammer was never the source of thors power, just a focal instrument to channel what he was already capable of.
probably has another hardware originating source.
higher ISR and DPC latency.
i wouldn't get it, its a usb dac on a pci-e <> usb bridge.
You missed when it changed then, the driver no longer has a 0 pre renders setting and its value corresponds to application default.
Ah, thats not one I had seen or heard of so far.
and looking it up im finding Shin Megami Tensei instead lol.
are you using native 10 powershell or did you install powershell core?
might not work with powershell core.