Radeon-ID Community Driver: Hybrid - Release Nebula 23.11.1 WHQL

1050/1400 should work flawlessly without any issues with that bios without upping the voltage.
1100 crashes if you don't up your core voltage by 30-50

 

At a basic level the Walt Stock according to what I checked ...
I saw someone on YouTube using the BIOS I sent as well
Probably a problem with my GPU.
(8PIN one slightly damaged) Because of a previously burned cable.
1050 on 1400 There is no huge difference to 1030 on 1300
In terms of performance, the intention is also for a single core.
Or am I wrong?
That's why I actually wanted the 1100 by 1400 and it failed for some reason.
It works, after 5-10 minutes the driver crashes neither the computer nor the card.

 

Did u tried to increase your TdrDelay
Go to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers" and create a key of type "DWORD (32-bit)" and name "TdrDelay" with a value of 10 as Decimal value

 

What @Kaneology said might actually work.

Did you try to up your core voltage in afterburner after setting 1100? But yeah the 1 burned pin might be the issue here

 

Honestly not, does it matter?
I just manually raised to 1050 on 1400 it looks fine ..
1100 on 1500 we get a whistle from the card (like electrical voltage)
Then the driver course is not the computer.

 

I tried to upload by AFTERBURNER by disabling in settings developed VOLTAGE direction option

 

thanks for the answer, you can read more? I communicate through a translator

 

yeah no problem
Do not try to schedule junk cleaner apps automatically, it will harm your drivers. If possible, exclude these drivers from being cleaned up

 

The regestry key gives the GPU 10 seconds to recover/respond vs. 2 seconds (default)

 

Hello, someone who shows me the installation procedure for terascale dx11 thanks

 

Why is it that every time I finish recording on amd relive the file is always corrupt? Btw the gpu I'm using is r7 240 gddr5.

 

I checked what you said.
I went into regedit
Unfortunately I did not find tdrDelay
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers

 

create a key of type "DWORD (32-bit)" and name "TdrDelay" with a value of 10 as Decimal value

 

Read this

 

Okay, it's done.
What to do now?
How do I know this time the driver will not crash?
Perform him OC to 1100 on 1400 manual?
Without changing voltage.

 

Does your card do 1100 without adjusting the core?

Mine barely does 1070 without tapping the voltage -- at 1100 I need 40mv+

 

Adrenalin Edition 22.3.2
launched today!

 

It depends, I can allow him 1100 is working until the driver crashes only.!
Of course there is also a BIOS designed to work on this frequency and a clock speed of 1400.
If I find a solution to this of course it will do the BIOS 1100 on 1400 if changes of MAX TEMP + direction of RPM and PUMP speed that way I keep it very cool while playing!

 

Another 10+ days down the drain /s

 

How do you change the pump speed though?
I haven't found any way to do so sadly