Game Ready Driver WHQL 465.89 download & discussion

It isn't in the list, but 3dmark is also supported

 

Some games wont open after I install this driver, I tested Cyberpunk and Warzone, when I opened GPU-Z the "raytracing and directml" features were unchecked. I needed to install the previous driver for these features work again and now I can open my games and "raytracing and directml" are checked on GPU-Z.
My specs:
i9 9900KS
RTX 3090 MSI Ventus 3x OC 24gb
Gigabyte Z390 Aorus Master
32GB RAM HyperX Fury

 

Clean install, both these games work fine, have been benchmarks and tested prior to release with this driver.

 

(YouTube): Video playback stutters while scrolling down the YouTube page. [3129705] - is certainly not fixed, even after installing the KB5000842 Update (yes, I've double-checked the number). The only "fix" that apparently works is the "MPO_disable.reg" file.

 

no it isn't.

Spoiler

Did you reboot?

Are you running a mixed refresh rate screen setup?

Is your chrome up to date?

The fix in the kb item makes NV12 hardware overlays work properly rather than failing and switching back and forth to BGRA.

 

Yes. Everything is up to date. Latest windows version, GPU drivers, chipset drivers, bios, etc. Single monitor setup. 60Hz, no mixed refresh rates.

Note: After upgrading to a newer CPU, I've clean-installed windows with newest updates (+KB5000842). The behaviour on YT vids is exactly the same as on my old i5, so... it seems as if this fix does not work?

 

Then you don't fit the criteria for having the issue in the first place.

what do you have in your start-up list?, anything that supports overlays?

 

99 processes on start-up. Clean windows image, only for gaming. No overlays, no GFE, no MSI Afterburner, no RTSS. Only Steam, Discord (w/ overlay disabled) and other launchers.

 

is your google login pulling down any third party extensions into your chrome profile?

 

I tried 2 times but dont work, same problem.
Windows is updated, I cleaned the registry and the bios is updated.
I will wait the next driver =x

 

None. Clean Chrome.

 

On the NVIDIA Page it says no reBar for Ryzen 3000, but what if one uses a motherboard bios with the AGESA 1.2.0.1 which supports reBar for the Ryzen 3000?
...is reBar supportet on those UEFIS + VBIOS upgrade on a 3080, but unofficially ?

 

That's the same response we got months ago, and the issue isn't on AMD hardware.....

 

Yep Motherboard

 

hello.

Can any one confirm that 94.02.42.00.f1 is the rebar bios for RTX gaming X trio 3090 - it updated via dragon center (wich i only installed for this update)

best regards

 

And D3D12 titles need to be written with hardware specific renderers for optimal performance, meaning you can break your game on one ihv, vs the other and then have to follow up with the driver vendor to jointly find a solution.

only cowboys and moron developers go for one implementation fits all graphics engines.

 

Hey Guys,


I think the BIOS update bricked my 3080 FE.


I used the bios updated provided by nVIDIA and it went well, said that the BIOS was updated successfully and that I needed to restart the pc. So I did and now it does not boot with the card plugged in.


I removed the card, booted the pc using the onboard gpu and the worked as it should. Plugged the card back in, and it does not even post.


Anyway to fix it without having to RMA it?


Thanks!!!

 

You need to turn off CSM to get an image with Rebar/4G enabled.

 

I have just updated the vbios on my 3060ti and have the latest bios for my MSI Gaming plus motherboard AGESA ComboAm4v2PI 1.2.0.0 I have ZEN2 3900x CPU and the NVIDIA control panel states that Resizable bar is enabled.

 

CSM is disabled