RadeonMod (Tweak Utility)

Discussion in 'Videocards - AMD Radeon Drivers Section' started by theoneofgod, Oct 23, 2015.

  1. OnnA

    OnnA Ancient Guru

    Messages:
    17,852
    Likes Received:
    6,744
    GPU:
    TiTan RTX Ampere UV
    ^^ No ATM
     
  2. marcomandolino

    marcomandolino Guest

    Messages:
    1
    Likes Received:
    0
    GPU:
    Ati Radeon HD 3670
    Hi :) I'm just new in this forum and also in 3D Graphic.

    With the last official driver for my old Ati Radeon HD 3670 on Windows 10, it work in Full HD but all 3D features didn't work and when i tried to vies some little 3D files on 3D builder, after some secons my laptop switched off and auto-shutted-down!

    So now i tried to download RadeonMod and CRU Restart

    I launched RadeonMod and try to fill all the fields with "not found" value.

    Now the question is: How can i test if the all 3D funtions/features of my old Ati Mobility Radeon HD 3670 work on Windows 10?

    Please, if you can, explain it step by step, i'm not an expert.... not yet ;-)

    Thanks a lot for take some times to answer to me :)

    Hare Krishna, Marco :)

    P.S. I tried some 3D Benchmark, also some basic one, and after some seconds my pc Autoshutdowns itself. I tried also DX9 and OpenGL with the same results. Can anyone Help Me :) ?? Thanks in Advance!
     
    Last edited: Mar 18, 2018
  3. LocoDiceGR

    LocoDiceGR Ancient Guru

    Messages:
    2,860
    Likes Received:
    1,074
    GPU:
    Gigabyte 3060 Ti
    As you said 3670 is an ancient card...and your pc autoshutdowns because of temperatures of course, and maybe the Life of this 'GPU' is coming near the end.
     
    z8373767 likes this.
  4. Garwinski

    Garwinski Member Guru

    Messages:
    185
    Likes Received:
    4
    GPU:
    XFX Fury X
    I want to use drivers without Radeon Control Settings, as it still installs the DVR-thingy. Is Freesync enabled by default? And how do I force enhanced sync? I have set VSyncControl_DEF to 3 and VsyncControl to 0x3300. Would this do the trick?
     

  5. Rambo

    Rambo Master Guru

    Messages:
    373
    Likes Received:
    329
    GPU:
    RX 7800 XT
    TurboSync and AntiStuttering have to be set to 0x3100
     
    OnnA likes this.
  6. OnnA

    OnnA Ancient Guru

    Messages:
    17,852
    Likes Received:
    6,744
    GPU:
    TiTan RTX Ampere UV
    and
    ==
    "KMD_FRTEnabled"=dword:00000001
    "KMD_MaxFrameRateRequested"=dword:00000046
    ==

    dword:00000046 = 70FPS
    For no Vsync Gameplay (99% Games don't need this anyways if Freesync is used)
    Lower latency = better FPS & Image smoothness.

    I have 60FPS (not 60V-sync) in FM7 in DX12.0 and it is working like a charm :D
     
  7. Garwinski

    Garwinski Member Guru

    Messages:
    185
    Likes Received:
    4
    GPU:
    XFX Fury X
    Thanks. I will actually use framerate limiter now. It gave me some problems in the past, but maybe it improved. How do I disable Vsync? I can select 1 through 4, 3 being dynamic, 4 being normal vsync.
     
  8. OnnA

    OnnA Ancient Guru

    Messages:
    17,852
    Likes Received:
    6,744
    GPU:
    TiTan RTX Ampere UV
    0x31000 is the default value in my registry (Enchanced Sync that is)
    IMO leave it as it is.... turn off in-Games always :D
     
  9. sambul81

    sambul81 Guest

    Messages:
    24
    Likes Received:
    0
    GPU:
    AMD FirePro 4900
    The 1st post doesn't mention Radeon 400 and 500 series, but I've Radeon RX460 and the tool recognized it and opened its Reg settings. Does it mean, I can use RadeonMod for this GPU?

    Also, the card has 2 fans, and around 45C they constantly cycle On/Off with clicking sound from the board relay. Is it possible to set the fans constantly running at low RMP around 45C card temperature, and what Reg setting it would be? I tried Wattman curves, but couldn't accomplish that. May be another tool can do it? I know SpeedFan can control that, but I prefer to change a Reg or BIOS setting.
     
  10. OnnA

    OnnA Ancient Guru

    Messages:
    17,852
    Likes Received:
    6,744
    GPU:
    TiTan RTX Ampere UV
    Yes you can, IMO it will work for any ATI tek :D
     

  11. sambul81

    sambul81 Guest

    Messages:
    24
    Likes Received:
    0
    GPU:
    AMD FirePro 4900
    Reg settings may differ and not overlap for various cards. How about fan control thresholds for 0DB feature at idle - any Reg setting?
     
    Last edited: Apr 7, 2018
  12. cap5lock

    cap5lock Active Member

    Messages:
    70
    Likes Received:
    23
    GPU:
    RTX™ 4070 Ventus 2X
    any option to force half refresh rate / double vsync in radeonmod ?
     
  13. OnnA

    OnnA Ancient Guru

    Messages:
    17,852
    Likes Received:
    6,744
    GPU:
    TiTan RTX Ampere UV
    Not yet implemented w/Relive
    But not needed if FreeSync is in use...
     
  14. adzkii

    adzkii Guest

    Messages:
    2
    Likes Received:
    0
    GPU:
    hd radeon 2600 pro
    can anyone give me the best performance settings for hd 2600 pro?
     
  15. Dr451

    Dr451 Active Member

    Messages:
    87
    Likes Received:
    4
    GPU:
    Gigabyte AMD R9 270X 2GB
    Profiles location on disk?
     

  16. theoneofgod

    theoneofgod Ancient Guru

    Messages:
    4,677
    Likes Received:
    287
    GPU:
    RX 580 8GB
    Where RadeonMod is located.
     
    OnnA likes this.
  17. shamija

    shamija Guest

    Messages:
    2
    Likes Received:
    1
    GPU:
    ASUS RX470 4GB
    guys, I need help, and I'm newbie in this gpu tweaks as its RadeonMod
    I know game is trash (PUBG) and isnt well optimized, but I would like from you to tell me which settings I could change for at least any fps boost...
    this is what I have found and changed, reading some older pages here:
    in tweaks: ULPS - OFF

    in UMD: FlipQueueSize = 0x3100
    Main3D_DEF = 1
    Main3D = 0x3100
    Main3D_SET = 0x3100
    ShaderCache = 0x3200
    TextureLod_DEF = -1 (for sharpness)
    Tessalation = OFF
    AntiStuttering = ON

    in 0000: Disable DMA Copy = 1
    Disable Block Write = 0
    MonitorResponse = 8000
    StuttedMode = 0

    and that's it...
    IM RX 470 4GB user, i3 6100
    Thank you...
     
  18. OnnA

    OnnA Ancient Guru

    Messages:
    17,852
    Likes Received:
    6,744
    GPU:
    TiTan RTX Ampere UV
    ^^ Looking good IMO
    Try to tweak only:

    FlipQueueSize = 0x3100 up to 0x33
    Main3D_DEF = 1 up to 3
    Main3D = 0x3100 up to 0x33
    Main3D_SET = 0x3100 up to 0x33

    Try 32/33 and 30 or run RadeonPRO and try there some Values ;)
     
  19. shamija

    shamija Guest

    Messages:
    2
    Likes Received:
    1
    GPU:
    ASUS RX470 4GB
    ey thank you mate
    I think that were default settings already on my gpu and I feel better with this new one (0x31) but I could test it a bit more
    thank you alot again
     
    OnnA likes this.
  20. OnnA

    OnnA Ancient Guru

    Messages:
    17,852
    Likes Received:
    6,744
    GPU:
    TiTan RTX Ampere UV
    New Tweak add-on incoming:
    Time saver ;) :D :p <- Yes now you have Default like you want (I have >30Games with Profiles in Adrenalin, no more Time consuming Tweaking)

    Chill specific Vaules for Target Framerate (usually good for FreeSync Gaming):

    [HKEY_LOCAL_MACHINE\SOFTWARE\AMD\Chill]
    "ChillLevelDefault"=dword:00000002
    "MaxFramerateDefault"=dword:00000046
    "MinFramerateDefault"=dword:00000040
    "MaxFramerateRange"=dword:00000064
    "MinFramerateRange"=dword:0000001e
    "ProfileEnableDefault"=dword:00000000

    CN responce time:

    [HKEY_LOCAL_MACHINE\SOFTWARE\AMD\CN]
    "PreloadDelay"=dword:000000c8
    "UnloadDelay"=dword:000000c8
     
    Last edited: Jun 24, 2018
    Dr451 likes this.

Share This Page