AMD Catalyst 15.7.1

Discussion in 'Videocards - AMD Radeon Drivers Section' started by fish, Jul 29, 2015.

  1. lorikano

    lorikano Master Guru

    Messages:
    323
    Likes Received:
    0
    GPU:
    2x Sapphire 7950@1150
    api tests are not working correctly. Its using default core clock and memory despite being set at +25% above default clock. Anybody experiencing something similar ?
     
  2. Paulo Narciso

    Paulo Narciso Guest

    Messages:
    1,226
    Likes Received:
    36
    GPU:
    ASUS Strix GTX 1080 Ti
    These drivers cause a huge delay in booting speed in windows 10. They cause a delay more than 10s with a black screen while I can move the cursor.
    Also in event viewer there's an error mesage like I said before.
    Without any driver installed windows 10 boots very fast.
     
  3. jeckop

    jeckop Guest

    Messages:
    72
    Likes Received:
    0
    GPU:
    2xR9-290-H2O@1100/1400
    I've the same issue and I think it's something related to crossfire, if you disable it the delay disappear....
     
  4. b0uncyfr0

    b0uncyfr0 Master Guru

    Messages:
    221
    Likes Received:
    7
    GPU:
    Gaming XXX 1070
    Hmm i seem to be getting better FPS in Witcher 3 but it could be placebo. Anyone confirm if these drivers are older than 1046.2?

    Bur even if they theyre older, they could have more optimization right?
     

  5. Paulo Narciso

    Paulo Narciso Guest

    Messages:
    1,226
    Likes Received:
    36
    GPU:
    ASUS Strix GTX 1080 Ti
    Yes, I was about to report that. The delay and the error message is related to crossfire. It works fine with crossfire disabled.
     
  6. jeckop

    jeckop Guest

    Messages:
    72
    Likes Received:
    0
    GPU:
    2xR9-290-H2O@1100/1400
    Ok I've got it, disabling ULPS through registry fixet it for me
     
    Last edited: Jul 30, 2015
  7. Paulo Narciso

    Paulo Narciso Guest

    Messages:
    1,226
    Likes Received:
    36
    GPU:
    ASUS Strix GTX 1080 Ti
    Well, but that's a workaround, Amd needs to fix this.
     
  8. jeckop

    jeckop Guest

    Messages:
    72
    Likes Received:
    0
    GPU:
    2xR9-290-H2O@1100/1400
    That's for sure, I really hope they fix this soon
     
  9. bobrix

    bobrix Active Member

    Messages:
    70
    Likes Received:
    1
    GPU:
    MSI 970@1542/8000
    It's related to zerocore, if disabled, windows boot fine, but in my case with moded driver for vsr, zerocore is always enabled giving 10s delay :/
     
    Last edited: Jul 30, 2015
  10. seaplane pilot

    seaplane pilot Guest

    Messages:
    1,295
    Likes Received:
    2
    GPU:
    2080Ti Strix
    Anyone else getting a black screen instead of the login screen with these drivers on windows 10? I see my cursor, click my keyboard and mouse and it will finally show the login screen. UPLS is disabled via afterburner & I am using crossfire.
     

  11. Pinstripe

    Pinstripe Master Guru

    Messages:
    303
    Likes Received:
    61
    GPU:
    RX 7700 XT
    Then why are the Maxwell2 cards showing FT_12.1/12.0 support in DXDiag?
     
  12. primetime^

    primetime^ Master Guru

    Messages:
    909
    Likes Received:
    17
    GPU:
    Sapphire RX Vega 64
    Are there any known changes in this driver compared to the previous 15.7 aside from adding a .1 to the end? And please don't list the exact things the previous driver did. If it has improvements or bug fixes what are they?
     
  13. DiceAir

    DiceAir Maha Guru

    Messages:
    1,369
    Likes Received:
    15
    GPU:
    Galax 980 ti HOF
    tested windows 10 and 3dmark overhead test. Results doesn't seem to add up. I get the following

    dx11 ST = 1.1m
    dx12 mt = 1.3mil

    According to what I saw it was better.
     
  14. N0bodyOfTheGoat

    N0bodyOfTheGoat Member Guru

    Messages:
    192
    Likes Received:
    0
    GPU:
    Sapphire Nitro R9 390 8GB
    These appear to make -dx11mt work better than the default (-dx11ST) in pCARS, better framerate and much more of a hotlap around Spa at 99% GPU usage.
     
  15. jeckop

    jeckop Guest

    Messages:
    72
    Likes Received:
    0
    GPU:
    2xR9-290-H2O@1100/1400
    Try to disable it in the registry, in my case afterburner was not enough to do the trick
     

  16. KFBR392

    KFBR392 Member

    Messages:
    34
    Likes Received:
    0
    GPU:
    RTX 3090
    Running a single 290X and I have not noticed anything like this. Probably a CrossFire issue...
     
  17. DmitryKo

    DmitryKo Master Guru

    Messages:
    419
    Likes Received:
    145
    GPU:
    ASRock RX 7800 XT
    Hmm. The latest Windows 10 SDK does seem to support levels 12_0/12_1 under Direct3D 11...

    Probably some quirk with cap bits reported by the Catalyst driver, since R9 290 does show level 12_0 under Direct3D 12. The driver also doesn't show PS specified stencil reference under Direct3D 11 yet, but it does under Direct3D 12.
     
  18. BoMbY

    BoMbY Guest

    Messages:
    185
    Likes Received:
    0
    GPU:
    Fury X
    Firefox is getting unusable with 15.7.1, as long as you don't disable the hardware acceleration, otherwise it is crashing on opening new tabs, and on some pages even without additional tabs (currently there is a 100% chance for me to crash Firefox when opening https://robertsspaceindustries.com/). The problem did not exist with 15.7
     
  19. Passus

    Passus Ancient Guru

    Messages:
    2,534
    Likes Received:
    1,021
    GPU:
    MSI 4070 Gaming X
    WOAH!

    these drivers are good for the 3d mark api test on dx12

    with gpu at stock 972/1250 i get just over 10 million draw calls, with the gpu oc'd to 1150/1400 i get over 14 million. with the previous drivers the oc didnt make much of a difference really

    also 1 thing, is the dx11 multithreaded test supposed to be lower than the single thread? 900,000 ish for singlethread and 800,000 ish for the multi
     
  20. Passus

    Passus Ancient Guru

    Messages:
    2,534
    Likes Received:
    1,021
    GPU:
    MSI 4070 Gaming X
    my guess is flashplayer doesnt like your OC on the cpu, lower it a bit and it seems to fix the flash crashes

    im saying flash crashes because this has been going on since the 14.12 omega drivers, cant say on drivers prior to that as only had this gpu in February 2015
     

Share This Page