ATI Catalyst 12.11 Beta 11 Modded driver For Legacy GPU

Discussion in 'Videocards - AMD Radeon Drivers Section' started by dellon132, Dec 27, 2012.

?

ATI Catalyst 12.11 B11 HotFix 11.01 Thoughts

  1. AMD HD 5000 and 6000 Users (GOOD)

    9.5%
  2. AMD Legacy GPU Users (HD 2000-4000) (GOOD)

    40.5%
  3. AMD Previous Legacy Mobility Users (Old GPU's) (GOOD)

    8.8%
  4. AMD Switchable Graphic Users (GOOD)

    6.8%
  5. AMD HD 5000-6000 Mobility Users (GOOD)

    8.1%
  6. AMD Legacy Mobility Users (HD 2000-4000) (GOOD)

    16.2%
  7. AMD HD 5000 and 6000 Users (BAD)

    0.7%
  8. AMD Legacy GPU Users (HD 2000-4000) (BAD)

    6.8%
  9. AMD Previous Legacy Mobility Users (Old GPU's) (BAD)

    4.1%
  10. AMD Switchable Graphic Users (BAD)

    6.1%
  11. AMD HD 5000-6000 Mobility Users (BAD)

    2.7%
  12. AMD Legacy Mobility Users (HD 2000-4000) (BAD)

    6.1%
Multiple votes are allowed.
  1. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    You're not serious are you?
    What makes you think these drivers are not Windows 8.1 compatible when I and other users are currently using it without problems?

    First, try exiting Test Mode. After doing so use both driver cleaners then try installing the driver again. Don't worry about following any extra steps or jumping through loops to install the driver. Just go to your normal OS and attempt to install driver. If you check the installation Guide for the Latest drivers you will see none of the options mentioned above in your post are required.

    Installation Guide:
    -Download and Extract the Driver
    -Use both Cleaners in the Dx9 Switcher or (DDU, Display Driver Uninstaller)
    -After uninstalling the driver, run AMD Setup
    and Install the Driver as you would normally.
    -INSTALLATION COMPLETE
     
    Last edited: Oct 18, 2013
  2. ottomanhero

    ottomanhero Guest

    Messages:
    8
    Likes Received:
    0
    GPU:
    ATI Radeon 4810 HD 512 mb
    I have some experience installing your drivers but I had problems installing previous version of this driver, it didn't install graphics driver due to signature problems.Thanks for the quick reply and good work you've done, I'll try to install newer version now.
     
  3. sykozis

    sykozis Ancient Guru

    Messages:
    22,492
    Likes Received:
    1,537
    GPU:
    Asus RX6700XT
    I'm not concerned with what operating systems you claim them to be compatible with. I'm only concerned with facts, and in this case, these drivers do not properly support Windows8.1 and as a result some are going to have issues. AMD has not released a legacy driver with proper support for Windows8.1 as of yet.
     
  4. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    And I'm telling you I've long patch up the driver for Windows 8.1 HD 4000 Users so it does work correctly. Personally for HD 2000 - HD 4000 Users alone I can probably throw out a stable build in which everything works. However I'm modding for a number of different setups in which everything does not work the same, while also optimizing the Dx9 Switcher to improve switch-ability.

    Also, AMD has yet to release a stable Legacy driver that works correctly for Windows 8 as Users are unable to use Metro Apps. However the 12.11 Moded Legacy Driver already has that issue resolved along with the broken Hardware Acceleration Legacy Users face when using the WDDM 1.1 Driver and Firefox.

    Thanks for posting.
     
    Last edited: Oct 18, 2013

  5. liquidfox12

    liquidfox12 Guest

    Messages:
    38
    Likes Received:
    0
    GPU:
    ati x1400
    Hey dellon carry on the good work , some people here seem to think wrongly that you are just modding the 12.11 drivers , which is wrong , this is not like that other FLEM mod , dellon is making his driver to work perfectly on all os on various card , its not the stock driver 12.11 hes added a lot of tweaks to them.

    Please personally test his builds and give accurate reports based on that . Hes just one guy working hard to help out users whom amd threw out without providing support.

    Thanks for your help delllon, i am here ready to test out any build you release on my x1400 mobility card , i have huge amount of games as well so i can tell you how well they work.

    Switched back to dna ati legacy 10.2 , its the only one that works at any time .
    will try your next build when you upload it
     
    Last edited: Oct 18, 2013
  6. bory12

    bory12 Guest

    Messages:
    8
    Likes Received:
    0
    GPU:
    AMD Radeon HD 4250/5470
    Ok, so i will be waiting for next release.

    Best regards,
    bory12.
     
  7. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    I may need your help to complete the build for Previous Legacy Mobility Graphic
    Cards. I will send you a build for testing and depending on your results.
    We will continue from there.

    I will send you build soon for testing.



    EDITED
    For those of you experiencing problems with the latest driver. I will be releasing a build privately for Testing, if you are interested in Testing it Pm and I will send it to you.
     
    Last edited: Oct 19, 2013
  8. heatseeker

    heatseeker Guest

    Messages:
    36
    Likes Received:
    0
    GPU:
    Sapphire 280x
    Hi dellon! Reporting my feedback for 12.11 B11 10 P6 v11.10.5

    - Installation without problems but...

    - Crossfire doesn't works on CS:GO. It's totally broken.

    Tomorrow i'll try with F1 2013 & Diablo 3.

    (4870 Crossfire, W8.1)
     
  9. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Yea, the latest Driver does not work with Crossfire. I will send you another driver but it may contain the Multi Gpu Clock Bug.
     
  10. heatseeker

    heatseeker Guest

    Messages:
    36
    Likes Received:
    0
    GPU:
    Sapphire 280x
    Ok, i'll wait for it... as i expected, crossfire doesn't works with f1 2003 & diablo 3.
     

  11. Menpower

    Menpower Active Member

    Messages:
    65
    Likes Received:
    0
    GPU:
    Sapphire R9 290 TRI-X OC
    The latest stable version is "ATI Catalyst 12.11 B11 HotFix 10 P6 V11.9 All Supported OS"
    am I right?
     
  12. liquidfox12

    liquidfox12 Guest

    Messages:
    38
    Likes Received:
    0
    GPU:
    ati x1400
  13. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    I sent the build for you to test.

    The 11.9 or the 11.8 Driver should be good for HD 2000 -HD 4000 Users.

    Thanks. I'm taking a look at it now.
     
  14. Menpower

    Menpower Active Member

    Messages:
    65
    Likes Received:
    0
    GPU:
    Sapphire R9 290 TRI-X OC
    11.9 nor 11.10.2 not working for me
    Code:
    Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
    
    {Unable to Load Device Driver}
    %hs device driver could not be loaded.
    Error Status was 0x%x
     
    Last edited: Oct 20, 2013
  15. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Here is the Download Link
    ATI Catalyst 12.11 B11 HotFix 10 P6 V11.8 All Supported OS
     

  16. Menpower

    Menpower Active Member

    Messages:
    65
    Likes Received:
    0
    GPU:
    Sapphire R9 290 TRI-X OC
  17. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Can you tell me about your installation procedure?
    (What do you do before installing the driver)
     
  18. Menpower

    Menpower Active Member

    Messages:
    65
    Likes Received:
    0
    GPU:
    Sapphire R9 290 TRI-X OC
    11.8 11.9 11.10.2
    aSimple CleanUP Utility
    aSimple Driver Cleaner
    Restart
    Setup.exe inside from package
     
  19. heatseeker

    heatseeker Guest

    Messages:
    36
    Likes Received:
    0
    GPU:
    Sapphire 280x
    Bad news with 11.10.6.1 build. Driver doesn't install :bang:
     
  20. dellon132

    dellon132 Guest

    Messages:
    1,898
    Likes Received:
    0
    GPU:
    HD 5570 1 GB DDR3
    Check Device Manager to see if the Display Adapter is available.

    Does Catalyst Install Manager display any errors after driver installation is complete?
     
    Last edited: Oct 20, 2013

Share This Page