(Scratch build) Bajaj PC

Discussion in 'Die-hard Overclocking & Case Modifications' started by WAROQ, Feb 1, 2013.

  1. Ice Cube

    Ice Cube Guest

    Messages:
    191
    Likes Received:
    0
    GPU:
    Gigabyte GTX 670
    LOL man you made me nostalgic.. I still remember when i was a kid, one day one of these ran over my leg.. :wanker:
     
  2. Ice Cube

    Ice Cube Guest

    Messages:
    191
    Likes Received:
    0
    GPU:
    Gigabyte GTX 670
    BTW.. really mad skills...
     
  3. WAROQ

    WAROQ Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    Club Radeon HD 6870
    Hahaha.. that s beautiful memories man..
    I'm pretty sure my bajaj will not run over your leg..LOL


    Night Mod...
    Windshield pole

    In order to make the drill more stabil, I mark with solder to make a little hole before drill it
    [​IMG]

    Then drill it
    [​IMG]

    Tap it with 3mm
    [​IMG]

    Place some bolt..and done
    [​IMG]

    In the morning before going to office I make a rear bumper.
    Dremel it before sunrise comes up
    [​IMG]

    I intend to make 8mm Acrilic...but I don't have it so I combines 2 acrilic 4mm,
    then press it with superglue
    [​IMG]

    A little putty and sanding
    I always do the sanding on the bucket of water, To keep dust from falling apart all over the place.
    [​IMG]

    Then Paint it, just when the sunrise come up.
    [​IMG]
     
    Last edited: Feb 18, 2013
  4. WAROQ

    WAROQ Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    Club Radeon HD 6870
    Assembling the ankle and Rear wheel.
    I've done this on Saturday..I got day off, and a lot of time for another mod.
    My plan is making shockbreker tilted a few degrees, just like this..
    [​IMG]

    I made a holder for mount the shockbreaker, I use acrylic with some bolt for the holder.
    Some drill for placing the bolt.
    [​IMG]

    Cut a little piece of acrilic, I use manual saw for cutting.
    [​IMG]

    [​IMG]

    [​IMG]

    I Also repaint the shock breaker to be black flat and white.
    [​IMG]

    [​IMG]

    This is the holder
    [​IMG]

    [​IMG]

    At this point I place the holder
    [​IMG]

    Here we go...
    [​IMG]
    Now it's tilt a couple degree.​
     
    Last edited: Feb 18, 2013

  5. chinobino

    chinobino Maha Guru

    Messages:
    1,139
    Likes Received:
    75
    GPU:
    MSI 3060Ti Gaming X
    Very impressive work - can't wait to see the finished product!
     
  6. styka

    styka Master Guru

    Messages:
    314
    Likes Received:
    1
    GPU:
    RX 480 8GB RD
    Wow, it has come along nicely, love the details you put into it, especially those tiny shockbreakers.. Lol

    Why not put a very small 2 stroke engine to make it more lively... Lmao to get that authentic irritating sound.


    Yeah, there are some of us here but not many, i used to hang around that so called "kaskus" for a long time until too many people gave too stupid advices..
    So here i am, still learning from a lot of guys here.

    Im in south jakarta mate, you ?
     
  7. WAROQ

    WAROQ Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    Club Radeon HD 6870
    Thanks man..

    You're "Geek" there...I see your profile at kaskus..
    Usually I'm hang around at their FJB..

    My home at Pondok gede, but my office at south jakarta..
    we should meet sometimes :)
     
  8. WAROQ

    WAROQ Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    Club Radeon HD 6870
    Front Wheel

    Mark for drill a hole.
    I will place front shockbreaker here
    [​IMG]

    Drill it
    [​IMG]

    Change the drill, with this.. I intend to make a bigger hole.
    [​IMG]

    Grind..
    [​IMG]

    Thats it
    [​IMG]

    I also make a couple more hole for mount it later.
    [​IMG]

    [​IMG]

    Place the shock-breaker
    [​IMG]

    [​IMG]

    Mounting it to the body
    [​IMG]

    Here we go with the wheel
    [​IMG]

    [​IMG]

    [​IMG]
    There's will be a couple finishing with the painting, cause I make a little scratch when mounting it.
     
  9. WAROQ

    WAROQ Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    Club Radeon HD 6870
    Small and a little Part
    I make progress on the little part and detail

    The Doors
    Bajaj has unique door design, the front door open to back side, and the back door open to the front side.
    So I will place door-hinge like this.
    [​IMG]


    The Air duct
    Print it from corel and stick it to 2mm acrylic
    [​IMG]

    Then dremel it...
    [​IMG]

    a bit rough at the edges
    [​IMG]

    [​IMG]

    It's smooth now
    [​IMG]

    [​IMG]

    Glue it with superglue
    [​IMG]

    Place it here, will be paint it soon.
    [​IMG]


    Fog lamp
    [​IMG]

    [​IMG]

    I will use a Little hat on top of the lamp
    [​IMG]

    [​IMG]
     
  10. sinnedone1

    sinnedone1 Guest

    Messages:
    21
    Likes Received:
    0
    GPU:
    XFX HD 6870 Crossfire
    Very nice. I'm enjoying watching this come together :D
     

  11. WAROQ

    WAROQ Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    Club Radeon HD 6870
    Thanks sinnedone..stay tuned I still work with this mod
     
  12. WAROQ

    WAROQ Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    Club Radeon HD 6870
    The Soft Top
    A couple pole for the top.
    [​IMG]

    Bend it
    [​IMG]

    [​IMG]

    [​IMG]

    Little teaser..
    Today my day off, so mod...on
    [​IMG]

    [​IMG]
     
  13. Uncle Dude

    Uncle Dude Ancient Guru

    Messages:
    2,312
    Likes Received:
    5
    GPU:
    RTX 4090
    Damn, the detail! Great work, man.
     
  14. WAROQ

    WAROQ Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    Club Radeon HD 6870
    Much more detail will come up... uncle dude :)



    The PSU Sleving
    [​IMG]

    [​IMG]

    [​IMG]

    Result
    [​IMG]
     
  15. WAOS

    WAOS Guest

    Messages:
    5
    Likes Received:
    0
    GPU:
    MSI HD 7970 3Gb
    Man...you are an artist !!!
     

  16. WAROQ

    WAROQ Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    Club Radeon HD 6870
    Thanks man.. :)

    Worklog Update before final Pict
    Water Cooling Mod
    I use Corsair H60 for Watercooling, mod the tube to fit the theme color..orange.
    Lets go void this baby warranty
    [​IMG]

    Cut the tube, and and throw away the original coolant water.
    Its Stink and kinda lumpy.
    [​IMG]

    I use my daughter Balloon pump to pump up the rest of coolant,
    [​IMG]

    I leave it all night..in order for the rest of the water is completely dry
    [​IMG]

    While waiting for the radiator dry i make mounting for it
    [​IMG]

    [​IMG]

    Paint it to Orange
    [​IMG]

    Mounting it in The Auto Rickshaw
    [​IMG]
     
    Last edited: Apr 30, 2013
  17. WAROQ

    WAROQ Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    Club Radeon HD 6870
    A couple little mod for the hardware

    Fan
    I do a little mod at the frame fan, cut it a half so the blade will fit in side a fan hole.
    [​IMG]

    [​IMG]

    It fit nicely
    [​IMG]

    SATA Cable Mod
    Sleve it with Orange UV
    [​IMG]

    [​IMG]

    VGA Mod
    Paint the Frame fan Cooler, and also mod the back panel, change it with acrylic.
    [​IMG]

    [​IMG]

    Hard disk
    Adding additional fan for HDD
    [​IMG]


    RAM

    [​IMG]
     
    Last edited: Apr 30, 2013
  18. WAROQ

    WAROQ Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    Club Radeon HD 6870
    Adding some small update in body and HW

    front face
    [​IMG]

    Wind Shield
    [​IMG]

    Back
    [​IMG]

    Head lamp
    [​IMG]

    Door Key
    [​IMG]

    top
    [​IMG]

    re route cable sleeving
    [​IMG]

    The light
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Last edited: Apr 30, 2013
  19. WAROQ

    WAROQ Guest

    Messages:
    48
    Likes Received:
    0
    GPU:
    Club Radeon HD 6870
    Update Final Pict
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Thanks
     
    Last edited: Apr 30, 2013
  20. Jkhan

    Jkhan Guest

    Massive congrats mate. You really put your heart and soul in it. This looks absolutely phenomenal (Y). Bravo.
     

Share This Page