Nvidia GeForce 314.07 Download & Discussion - WHQL

Discussion in 'Videocards - NVIDIA GeForce Drivers Section' started by saec, Feb 18, 2013.

  1. Supertribble

    Supertribble Master Guru

    Messages:
    978
    Likes Received:
    173
    GPU:
    Noctua 3070/3080 FE
    I wasn't asked to restart. Weird.
     
  2. Goose

    Goose Guest

    Messages:
    170
    Likes Received:
    0
    GPU:
    GTX980Ti Hybrid (+ GT745)
    Sorry, I'm not …

    So far, so good. :nerd:
     
  3. dsbig

    dsbig Ancient Guru

    Messages:
    4,108
    Likes Received:
    67
    GPU:
    Nvidia 4070
    I dont have that problem..

    matter of fact my card is actually going to p12 state now when not doing anything, and it been a while sense its went to p12.

    I couldnt believe when it said my idle temp where cooler to about 30c, normally on idle it would be around 50c
     
  4. JahPahZzZ

    JahPahZzZ Guest

    Messages:
    13
    Likes Received:
    0
    GPU:
    4-Way SLI GTX 670 2GB
    Anyone having performance problems when is SLI enabled?

    Single GPU - Full GPU Usage
    2-Way SLI enabled - 1st GPU usage 10%~20% / 2nd GPU usage 98%.

    When I enable SLI I get worst fps than when SLI is turned off. Ex: 120fps (single gpu) and 30fps (SLI). Especially if I turn on the 3D Vision!

    Games that I tested: rFactor 2, Game Stock Car, Euro Truck Simulator 2, Devil may cry...
     

  5. Xtreme1979

    Xtreme1979 Guest

    I feel these drivers are working my card harder. No artifacts or anything; however, I received reproducible "driver has stopped responding" when sitting at the pause screen in Max Payne 3 @ 99% GPU usage. Lowered my GPU offset and they went away. Also noticed in BO2 that my card was hitting it's power limit 132% more frequently, which leads to throttling. Lowering my GPU offset to +100mHZ and MEM offset to +200mHZ kept my card within it's target. Keep in mind this is with a 120fps in game cap, and 4x SGSSAA applied. Overall both games ran beautifully, guess I can't overclock as high a before which really isn't an issue.
     
  6. MMXMMX

    MMXMMX Master Guru

    Messages:
    244
    Likes Received:
    70
    GPU:
    Asus Strix 4090 OC
    After installing the new video driver i dont have an icon in my start tray any more .

    Is that normal ?
     
  7. yosef019

    yosef019 Ancient Guru

    Messages:
    2,186
    Likes Received:
    17
    GPU:
    EVGA 1080 ti
    do you instal via Geforce experience?
    i have this problem too buy i don't care
     
  8. writer21

    writer21 Guest

    Messages:
    68
    Likes Received:
    0
    GPU:
    EVGA SC ACX 780 sli 3gb
    What card you have and cpu? I can't run black ops 2 with 4x sgssaa let alone 2x. Game stutters with msi 670 pe and 3570k 4.4 oc. Have to set frame cap to 90 or lower because frames drop.
     
  9. Dragam

    Dragam Guest

    Messages:
    97
    Likes Received:
    0
    GPU:
    Msi gtx 680 sli
    I have the exact same issue TJ, and i have msi cards aswell.

    I decided to just go back to stock bios and settle with 100 mhz OC on core and 300 on ram for everyday use.
     
  10. RedSeptember

    RedSeptember Guest

    Messages:
    470
    Likes Received:
    0
    GPU:
    Asus GTX 690 4gb
    Drivers seem good on my end for any 690 users out there.
     

  11. The General

    The General Guest

    Messages:
    3,108
    Likes Received:
    5
    GPU:
    FirePro W5000 2GB
    Going back to the 313.95, neuixz freezes up everytime i try to play. 314 not good for my card i guess.
     
  12. villa_youth

    villa_youth Master Guru

    Messages:
    808
    Likes Received:
    0
    GPU:
    780 Ti
    Excellent news, will give em a try.
     
  13. Dr.No.pt

    Dr.No.pt Member

    Messages:
    14
    Likes Received:
    0
    GPU:
    GTX 580
    How the hell can i force p12 state in windows 8 with this drivers ??

    I've tried to go back to 313.96 and now their not going either to p12 state in idle ... :bang::bang:

    Can someone help ?
     
    Last edited: Feb 19, 2013
  14. D4rKy21

    D4rKy21 Banned

    Messages:
    724
    Likes Received:
    0
    GPU:
    Gigabyte GTX 980 G1 SLI
    Same here no problems so far :)
     
  15. Dr.No.pt

    Dr.No.pt Member

    Messages:
    14
    Likes Received:
    0
    GPU:
    GTX 580
    Sorry to quote myself but if found the solution to this problem and want to share it with everyone.

    The problem is if you are using a 120hz monitor the graphics card cannot handle p12 state because the low clocks are not enough to drive the display at 120hz.

    I had mine at 144hz and in my case not even the p8 state is enough. Only p0 can handle it.

    Resuming:

    120hz - p8
    144hz - p0

    Hope to help someone in future.

    Cheers. :)
     
    Last edited: Feb 20, 2013

  16. xoroku

    xoroku Guest

    Messages:
    19
    Likes Received:
    0
    GPU:
    SLI GTX 670 2Gb
    In surround gaming the task bar isn't centered anymore and maximizing windows span them over all the monitors instead of only 1.

    Other than that everything seems fine.
     
  17. -Tj-

    -Tj- Ancient Guru

    Messages:
    18,097
    Likes Received:
    2,603
    GPU:
    3080TI iChill Black
    And another Hz discovery from me,

    When i said 59Hz bug, with this driver it somehow selects 59Hz by default in "Control Panel\Appearance and Personalization\Display\Screen Resolution" instead of 60Hz.

    This also affected nvcpl and by "adjust desktop size and position" it was 60Hz while by "change resolution" options it was set to 59Hz and if I applied 60Hz it always reverted to 59Hz. Now if I selected 59Hz by "adjust desktop size and position" 60Hz disappeared.


    I've manually applied 60Hz by "Control Panel\Appearance and Personalization\Display\Screen Resolution" and now it shows 60Hz correctly.
    [​IMG]

    I didnt notice this issue with older driver. Im going to see what's up in BF3 and DMC4 if it fixes that 59Hz conflict in Windows 8.


    EDIT: no, for some reason DMC4 doesnt want to use 60Hz & 1080P, it always selects 4:3 or 5:4 resolutions, if i select 59Hz i can see all available 4:3, 5:4, 16:10, 16:9. Could be windows8 & HDMI issue? Last time i tested this game i was using DVI.

    And in BF3 it still shows max 59.94Hz (doesnt matter HDMI or DVI), while in windows 7 real 60.00Hz.. ah well -_-
     
    Last edited: Feb 19, 2013
  18. Xtreme1979

    Xtreme1979 Guest

    GTX 680 and a 2600K at 4.4gHz. Here's a video of some gameplay with 4x SGSSAA and below are my inspector settings. I also enable 4xMSAA in game in order for the below settings to work.

    http://www.youtube.com/watch?feature=player_detailpage&v=3Txk-KLlH1Y

    [​IMG]
     
  19. grabibus

    grabibus Master Guru

    Messages:
    201
    Likes Received:
    3
    GPU:
    EVGA RTX 3090
    I don't know.
    In fact I was saying that I have much more fps than with 310.90 WHQL in BO2, but I am concerned with my GTX580 overclock stability in that game.
    I tried 30mns Modern Warfare (COD4) yesterday @ 910MHz core without any problems.

    I will try longer and other games also (I only play COD's).
    I ran also 3DMark "Fire Strike" test and 3Dmark 11 @ 930MHz without any problems...Which I couldn't do with 310.90WHQL . Scores are higher also than with 310.90 WHQL, but same scores than with 313.96 beta.
     
    Last edited: Feb 19, 2013
  20. WhiteLightning

    WhiteLightning Don Illuminati Staff Member

    Messages:
    30,766
    Likes Received:
    3,932
    GPU:
    Inno3d RTX4070
    Ive had this 59hz bug for like forever (native resolution). though its not really a bug since its set at 59.94 i think.

    lol wth 1920x1200 isnt listed in nvcp. hmm had to check it from customise settings. weird.
     
    Last edited: Feb 19, 2013

Share This Page